中国激光, 2011, 38 (7): 0702011, 网络出版: 2011-06-14   

数值正交方法在微槽道散热器性能优化上的运用

Optimalized Design of Micro-channel Heat Sinks with Orthogonal Simulation
作者单位
1 中国电子科技集团第三十八研究所, 安徽 合肥 230088
2 中国科学技术大学热科学和能源工程系, 安徽 合肥 230027
摘要
对自行设计的插入式微槽道散热进行数值计算。重点研究了影响散热效果、槽道阻力的3个主要因素:流量、流体工质类型和插入肋片的接触方式。通过正交方法进行数值计算,给出了最优的槽道设计方式、流量和流体工质的组合,并计算了各个因素对散热效果的显著性水平。通过计算耗时和成本的比较,说明数值正交方法在优化设计方法上的优势。
Abstract
The brand-new micro-channel heat sinks are designed using plug-in fins and simulated. The impact factors, namely coolant, flow rate and heat sink geometry, are considered in the study of the flow and heat transfer performance of heat sink. The optimal operating condition is obtained by the method of orthogonal simulation by considering the notability of each factor. It is found that the orthogonal simulation method can save cost both in time and money. The orthogonal simulation method performs well in the design of channel sink.
参考文献

[1] 任洪亮, 庄礼辉, 李银妹. 双光镊测量胶体微粒间相互作用势[J]. 中国激光, 2008, 35(1): 151~155

    Ren Hongliang, Zhuang Lihui, Li Yinmei. Measurement of interaction potential between colloidal particles using dual optical tweezers[J]. Chinese J. Lasers, 2008, 35(1): 151~155

[2] 王霄, 张惠中, 丁国民 等. 聚丙烯塑料激光透射焊接工艺[J]. 中国激光, 2008, 35(3): 466~471

    Wang Xiao, Zhang Huizhong, Ding Guomin et al.. Laser transmission welding polypropylene plastics[J]. Chinese J. Lasers, 2008, 35(3): 466~471

[3] 罗乐, 宗仁鹤, 周章武 等. 激光在美容中的应用研究[J]. 量子电子学报, 2002, 19(4): 323~325

    Lu Le, Zong Renhe, Zhou Zhangwu et al.. Study on the application of laser in cosmetology[J]. Chinese Journal of Quantum Electronics, 2002, 19(4): 323~325

[4] 陶毓伽, 淮秀兰, 李志刚 等. 大功率固体激光器冷却技术进展[J]. 激光杂志, 2007, 28(2): 11~12

    Tao Yujia, Huai Xiulan, Li Zhigang et al.. Advancement of cooling techniques in high-power solid state laser[J]. Laser Journal, 2007, 28(2): 11~12

[5] 武德勇, 高松信, 吕文强 等. 激光二极管高效铜微通道冷却器设计[J]. 强激光与粒子束, 2004, 16(7): 840~842

    Wu Deyong, Gao Songxin, Lü Wenqiang et al.. Design of high efficient copper micro-channels cooler for diode laser[J]. High Power Laser and Particle Beams, 2004, 16(7): 840~842

[6] 刘东, 刘明侯, 王亚青 等. 大高宽比小槽道冷却大功率激光器的实验研究[J]. 中国激光, 2010, 37(3): 640~645

    Liu Dong, Liu Minghou, Wang Yaqing et al.. Experimental studies on large height/width ratio and mini-channel radiator for high power density laser cooling[J]. Chinese J. Lasers, 2010, 37(3): 640~645

[7] 王亚青, 刘明侯, 刘东 等. 高功率激光器喷雾冷却的实验研究[J]. 强激光与粒子束, 2009, 21(12): 1761~1766

    Wang Yaqing, Liu Minghou, Liu Dong et al.. Experimental study on spray cooling for high-power laser[J]. High Power Laser and Particle Beams, 2009, 21(12): 1761~1766

[8] D. B. Tuckerman. R. F. W. Prese. High-performance heat sinking for VLSI[J]. IEEE Electr. Device Lett., 1981, 2(5): 126~129

[9] S. V. Garimella. C. B. Sobhan. Transport in microchannels-a critical review[J]. Annual Review of Heat Transfer, 2003, (13): 1~50

[10] Gian Luca Morini. Single-phase convective heat transfer in microchannels: a review of experimental results[J]. Thermal Sciences, 2004, 43(7): 631~651

[11] Paisarn Naphon, Somchai Wongwises. A review of flow and heat transfer characteristics in curved tubes[J]. Renew. Sust. Energ. Rev., 2006, 10(5): 463~490

[12] 高建社, 王军, 周永学 等. 5个杨树无性系抗旱性研究[J]. 西北农林科技大学学报(自然科学版), 2005, (2): 112~116

    Gao Jianshe, Wang Jun, Zhou Yongxue et al.. Studies on drought-resistance of five poplar clones[J]. Journal of Northwest A & F University (Natural Science Edition),2005, (2): 112~116

[13] 李云雁, 胡传荣. 试验设计与数据处理[M]. 北京: 化学工业出版社, 2005. 98~100

    Li Yunyan, Hu Chuanrong. Experiment Design and Date Processing[M]. Beijing: Chemistry Industry Press, 2005. 98~100

王亚青, 刘东, 刘明侯, 王璐, 郭红. 数值正交方法在微槽道散热器性能优化上的运用[J]. 中国激光, 2011, 38(7): 0702011. Wang Yaqing, Liu Dong, Liu Minghou, Wang Lu, Guo Hong. Optimalized Design of Micro-channel Heat Sinks with Orthogonal Simulation[J]. Chinese Journal of Lasers, 2011, 38(7): 0702011.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!