[1] Rajan Bhatia. Materials issues and engineering design considerations for device packaging of high power edge emitting semiconductor laser arrays and monolithic stacked laser diode bars. Technical Report, 2003

[2] 金菊其. 大功率半导体激光器的阵列化技术. 激光与光电子学进展. 2001,8:31~35

[3] Endriz J Ｇ, Vakili M, Browder G S et al.. High power diode laser arrays. IEEE Journal of quantum electronics,1992,28(4):952~965

[4] Bezotosnyi V V, Kov K K. Modelling of the thermal parameters of high power linear laser-diode arrays:Two-dimensional transient model. Quantum Electronics, 1998, 28(3):217~220

[5] Mei Z, Hua F, Glazer J. Low Temperature Soldering. IEEE KPMT Int′l Electronics Manufacturing Technology Symposium,1997,463~476

[6] Chu K M, Lee J S, Cho H S et al.. A fluxless flip chip bonding for VCSEL arrays using silver coated indium solders bumps.International IEEE Conference On Aisan Green Electronics(AGEC),2004,110~116

[7] Chuang R W, Kim D K, Lee C C. A Fluxless Process of Producing Tin-Rich Gold-Tin Joints in Air. IEEE Transactions on Components and Packaging technologies, 2004,27(1):177~181

[8] Weir S, Bader V, Azdasht G et al.. Fluxless Die Bonding of High Power Laser Bars using the AuSn-Metallurgy. Electronic Components and Technology Conference, 1997, 780~787

[9] Kuhmann J F, Preuss A, Addphi B et al.. Oxidation and Reduction Kinetics of Eutectic SnPb, InSn and AuSn: A Knowledge Base for Fluxless Solder Bonding Applications. Electronic Components and Technology Conference, 1997,120~126

[10] Missaggia L J, Walpole J N, Liau Z L et al.. Microchannel heat sinks for two-dimensional high-power-density diode laser arrays. IEEE Journal of quantum electronics, 1989, 25(9):1988~1992

[11] Roy S K, Avanic B L. A very high heat flux microchannel heat exchanger for cooling of semiconductor laser diode arrays. IEEE Transctions on Components, Packaging, and Manufacturing Techonology, 1996, B, 19(2): 444~451

[12] Beach R, Benett W J, Freitas B L et al.. Modular microchannel cooled heatsinks for high average power laser diode arrays. IEEE Journal of Quantum Electronics, 1992, 28(4):966~976

[13] Goodson K E, Kurabayashi K, Pease R F W. Improved heat sinking for laser-diode arrays using microchannels in CVD diamond. IEEE Transctions on Components, Packaging, and Manufacturing Techonology, PART B, 1997, 20(1):104~109

[14] Ebert T, Treusch G, Loosen P et al.. Optimization of micro channel heat sinks for high power diode lasers in copper technology. SPIE, 1998, 3285:25~29

[15] Hirofumi Miyajima, Hirofumi Kan, Takeshi Kanzaki et al.. Jet-type, water-cooled heat sink that yields 255-W continuous-wave laser output at 808 nm from a 1-cm laser diode bar. Opt. Lett.,, 2004,29(3):304~306

[16] Trensch H G, Du K, Baumann M et al.. Fiber-coupling technique for high power diode laser arrays. SPIE,1998, 3267:98~106

[17] Heinemann S, Leininger L. Fiber coupled diode lasers and beam-shaped high-power stacks. SPIE,1998, 3267:116~120

[18] Ehlers B, Du K, Baumann M et al.. Beam shaping and fiber coupling of high power diodes laser arrays. SPIE,1997, 3097:639~644

[19] Baumann M, Hlers B, Qcuade M et al.. compact fiber-coupled high-power diode laser unit. SPIE,1997, 3097:712~716

[20] Sturm V, Trensch H G, Loosen P. Cylindrical microlenses for collimating high-power diode lasers. SPIE,1997, 3097:717~726