大出瞳自由曲面头盔显示器光学系统的设计

杨波; 韦晓娜; 张薇; 庄松林

doi:doi:10.3788/gzxb20114007.1051

光子学报, 2011, 40 (7): 1051, 网络出版: 2011-08-10

大出瞳自由曲面头盔显示器光学系统的设计

Design Method of a Freeform HMD System with Large Pupil Size

论文大纲

杨波 ^*韦晓娜张薇庄松林

作者单位

上海理工大学光电信息与计算机工程学院，上海 200093

自由曲面光学元件光学设计成像系统非对称结构 Freeform Optical elements Optical design Imaging system Nonsymmetric structure

摘要

头盔显示器系统由于自身对尺寸和重量有严格要求，采用自由曲面器件可以起到减少透镜片数，从而缩小系统尺寸、减轻重量等作用.针对目前单片式自由曲面棱镜解决方案存在的出瞳直径小，棱镜自由曲面光学面加工定位困难等问题，介绍了一种大出瞳自由曲面头盔显示器光学系统的设计方法，并给出了设计结果.设计方案采用了自由曲面棱镜和薄透镜的双片式结构，棱镜和薄透镜都各自含有一个平面光学面，有效降低了加工难度，同时薄透镜与显示器可以作为一个整体调整，不增加装调难度，采用0.61寸微型显示器，对角视场45°，出瞳直径达到了10 mm.

Abstract

Usually, freeform optical surfaces do not have rotational symmetry compared with traditional spherical and aspheric elements, so they have more freedom for system design. In some optical systems which have strict package requirements, such as overall length, weight and volume etc., freeform optical elements can help to satisfy these requirements through reducing lens number of the system. In this paper, the design method of freeform optical elements was introduced, and proposed several design examples of the optical system were proposed which adopted freeform optical elements. From these design examples, the advantages of using freeform optical elements could be proved. The size of the microdisplay used is 0.61 inch and FOV is 45°. The exit pupil diameter is 10 mm.

参考文献

[1] YANG Bo, WANG Yongtian, LIU Yue, et al. Efficient raytracing for freeform reflectors［J］. Optik, 2009, 120(1): 4044.

[2] 王红, 周雅, 刘越, 等. 光学透视式增强现实显示系统虚拟遮挡问题研究［J］. 中国图像图形学报, 2008, 13(8):15651569.

程德文, 王涌天, 刘越, 等. 轻小型大视场自由曲面棱镜头盔显示器光学系统:中国,200810167800.7［P］. 20081016.WANG Hong, ZHOU Ya, LIU Yue, et al. Research on the realvirtual occlusion in an optical seethrough AR system［J］. Journal of Image and Graphics, 2008, 13(8): 15651569.

[3] 杜雪, 王尔祺, 李荣彬, 张志辉. 自由曲面光学透镜注射成型误差因素研究［J］. 应用光学, 2007, 28(6): 0684688.

DU Xue, WANG Erqi, LI Rongbin, et al. Investigation on error factor of injection molding plastic for freeform optics［J］. Journal of Applied Optics, 2007, 28(6): 684688.

[4] 赵星, 方志良, 崔继承, 等. 微型投影机光学引擎的研究［J］. 光学学报, 2007, 27(5):913918.

ZHAO Xing, FANG Zhiliang, CUI Jicheng, et al. Study on the optical engine of the miniprojector［J］. Acta Optica Sinica, 2007, 27(5): 913918.

[5] HICKS R A. Direct methods for freeform surface design［C］. SPIE, 2007, 6668: 666802.

[6] CHANG S. Offaxis reflecting telescope with axiallysymmetric optical property and its applications［C］. SPIE, 2006, 6265: 626548.

[7] JEONG H S, YOO H S, LEE S H, et al. Low profile optic design for mobile camera using dual freeform reflective lenses［C］. SPIE, 2006, 6288: 628808.

[8] TOGINO T. Decentered optical system and optical apparatus equipped therewith: US, 6646812［P］. 20031111.

[9] TAKAHASHI J. Image display apparatus: US, 6028709［P］. 20000222.

杨波, 韦晓娜, 张薇, 庄松林. 大出瞳自由曲面头盔显示器光学系统的设计[J]. 光子学报, 2011, 40(7): 1051. YANG Bo, WEI Xiaona, ZHANG Wei, ZHUANG Songlin. Design Method of a Freeform HMD System with Large Pupil Size[J]. ACTA PHOTONICA SINICA, 2011, 40(7): 1051.

大出瞳自由曲面头盔显示器光学系统的设计

关于本站 Cookie 的使用提示

全站搜索

大出瞳自由曲面头盔显示器光学系统的设计

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索