中国激光, 2015, 42 (2): 0206004, 网络出版: 2015-01-09   

气流环境中碳纤维/环氧树脂复合材料烧蚀羽烟对激光透射率的影响

Influence of Error from Plume on Transmittivity During Laser Irradiating Carbon/Epoxy Composites in Gas Flow
作者单位
西北核技术研究所激光与物质相互作用国家重点实验室, 陕西 西安 710024
引用该论文

彭国良, 张相华, 高银军, 刘卫平. 气流环境中碳纤维/环氧树脂复合材料烧蚀羽烟对激光透射率的影响[J]. 中国激光, 2015, 42(2): 0206004.

Peng Guoliang, Zhang Xianghua, Gao Yinjun, Liu Weiping. Influence of Error from Plume on Transmittivity During Laser Irradiating Carbon/Epoxy Composites in Gas Flow[J]. Chinese Journal of Lasers, 2015, 42(2): 0206004.

参考文献

[1] 常新龙, 李正亮. 碳纤维/环氧树脂层合板的激光烧蚀特性分析[J]. 红外与激光工程, 2011, 40(9): 1691-1695.

    Chang Xinlong, Li Zhengliang. Analysis of carbon/epoxy laminates ablation subject to laser irradiation[J]. Infrared and Laser Engineering, 2011, 40(9): 1691-1695.

[2] 李雅娣, 吴平. 碳纤维/环氧树脂复合材料层板连续激光烧蚀试验研究[J]. 纤维复合材料, 2010, 21(2): 21-24.

    Li Yadi, Wu Ping. The tests of carbon fiber/epoxy laminated composites under continuous laser irradiation[J]. Fiber Composites, 2010, 21(2): 21-24.

[3] 陈敏孙, 江厚满. 切向空气气流对激光烧蚀碳纤维复合材料过程的影响[J]. 光学 精密工程, 2011, 19(2): 482-486.

    Chen Minsun, Jiang Houman. Influence of tangential airflows on process of laser ablating carbon-fiber composites[J]. Optics and Precision Engineering, 2011, 19(2): 482-486.

[4] 陈胜石, 宁子立. 固体发动机羽烟的激光透射率测试[J]. 应用光学, 2009, 30(5): 864-868.

    Chen Shengshi, Ning Zili. Laser transmittance measurement technology on plume from solid- propellant engine[J]. Journal of Applied Optics, 2009, 30(5): 864-868.

[5] 杨立波, 孙美. 装药排气羽烟激光透射率研究[J]. 火炸药学报, 2006, 29(6): 45-47.

    Yang Libo, Sun Mei. Study on laser transmittances of charge plumes[J]. Chinese Journal of Explosives & Propellants, 2006, 29(6): 45-47.

[6] 赵建华, 袁宏永, 范维澄, 等. 火灾烟雾的多波长衰减特性研究[J]. 红外与毫米波学报, 2002, 21(3): 221-224.

    Zhao Jianhua, Yuan Hongyong, Fan Weicheng, et al.. Multi-wavelength attenuation properties of fire smokes[J]. Journal of Infrared and Millimeter Waves, 2002, 21(3): 221-224.

[7] 陈敏孙. 切向气流作用下激光对纤维增强树脂基复合材料的辐照效应研究[D]. 长沙: 国防科技大学, 2012.

    Chen Minsun. Research on the Laser Irradiation Effects on Fiber Reinforced Resin Composites Subjected to Tangential Gas Flow [D]. Changsha: National University of Defense Technology, 2012.

[8] 廖光宣, 王喜世, 秦俊, 等. 热灾害实验诊断方法[M]. 合肥: 中国科学技术大学出版社, 2003.

    Liao guangxuan, Wang xishi, Qin Jun, et al.. Experimental Diagnosis Method of Thermal Disaster[M]. Hefei: University of Science and Technology of China Press, 2003.

[9] 余常昭. 紊动射流[M]. 北京: 高教出版社, 1993.

    Yu Changshao. Turbulent Jet[M]. Beijing: Higher Education Press, 1993.

[10] 彭国良, 闫辉, 刘峰, 等. 纤维增强复合材料激光烧蚀效应的数值模拟[J]. 中国光学, 2013, 6(2): 216-222.

    Peng Guoliang, Yan Hui, Liu Feng. Numerical simulation of laser ablation of fiber- reinforced composite material[J]. Chinese Optics, 2013, 6(2): 216-222.

彭国良, 张相华, 高银军, 刘卫平. 气流环境中碳纤维/环氧树脂复合材料烧蚀羽烟对激光透射率的影响[J]. 中国激光, 2015, 42(2): 0206004. Peng Guoliang, Zhang Xianghua, Gao Yinjun, Liu Weiping. Influence of Error from Plume on Transmittivity During Laser Irradiating Carbon/Epoxy Composites in Gas Flow[J]. Chinese Journal of Lasers, 2015, 42(2): 0206004.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!