[1] 杨胶溪, 文强, 李子阳. 添加Ni对激光熔覆CuAl10铜合金组织与性能的影响[J]. 中国激光, 2015, 42(3): 0306006.

    Yang Jiaoxi, Wen Qiang, Li Ziyang. Influence of Ni additions on the microstructures and properties of laser clad CuAl10 coatings[J]. Chinese J Lasers, 2015, 42(3): 0306006.

[2] Yan H, Zhang P L, Yu Z S, et al. Microstructure and tribological properties of laser-clad Ni-Cr/TiB2 composite coatings on copper with the addition of CaF2[J]. Surface & Coatings Technology, 2012, 206(19): 4046-4053.

[3] 陈岁元, 董江, 刘大亮, 等. 铜合金表面激光原位制备陶瓷颗粒增强钴基合金梯度涂层[J]. 中国激光, 2009, 36(5): 1218-1223.

    Chen Suiyuan, Dong Jiang, Liu Daliang, et al. Ceramic particle reinforce Co-based alloy gradient coating by laser synthesis in-situ on the surface of Cu-Cr alloy[J]. Chinese J Lasers, 2009, 36(5): 1218-1223.

[4] Dehm G, Medres B, Shepeleva L, et al. Microstructure and tribological properties of Ni-based cladding on Cu substrates[J]. Wear, 1999, 225: 18-26.

[5] Yan H, Zhang J, Zhang P L, et al. Laser cladding of C-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold[J]. Surface & Coatings Technology, 2013, 232: 362-369.

[6] 赵静梅, 高士友, 牟明强, 等. 铜合金表面搅拌摩擦焊和激光熔覆制备镍基合金涂层[J]. 中国激光, 2016, 43(1): 0106003.

    Zhao Jingmei, Gao Shiyou, Mu Mingqiang, et al. Ni-based alloy surface layer on copper fabricated by combination of laser cladding and friction stir welding[J]. Chinese J Lasers, 2016, 43(1): 0106003.

[7] Ng K W, Man H C, Cheng F T, et al. Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts[J]. Applied Surface Science, 2007, 253(14): 6236-6241.

[8] Yan H, Wang A H, Xu K D, et al. Microstructure and interfacial evaluation of Co-based alloy coating on copper by pulsed Nd…YAG multilayer laser cladding[J]. Journal of Alloys and Compounds, 2010, 505(2): 645-653.

[9] 闫华. 铜合金表面激光复合耐磨层及界面特性研究[D]. 武汉: 华中科技大学, 2010: 82- 104.

    YanHua. Microstructure and interfacial characteristics of wear-resistant composite coating on copper by laser cladding[D]. Wuhan: Huazhong University of Science and Technology, 2010: 82- 104.

[10] 闫华, 张培磊, 于治水. 铜合金表面激光熔覆Ni基涂层的组织及界面结构[J]. 特种铸造及有色合金, 2013, 33(12): 1093-1097.

    Yan Hua, Zhang Peilei, Yu Zhishui. Microstructure and interfacial characteristics of laser cladding Ni-based coating on copper alloy[J]. Special-cast and Non-ferrous Alloys, 2013, 33(12): 1093-1097.

[11] Lin Y H, Yao J H, Lei Y P. Microstructure and properties of TiB2-TiB reinforced titanium matrix composite coating by laser cladding[J]. Optics and Lasers in Engineering, 2016, 86: 216-227.

[12] 刘洪喜, 唐淑君, 蔡川雄, 等. 模具钢表面激光原位制备Ni基合金复合涂层的微结构与性能[J]. 中国激光, 2013, 40(6): 0603002.

    Liu Hongxi, Tang Shujun, Cai Chuanxiong, et al. Microstructure and property of laser in situ preparation of Ni-based alloy composite coating on die steel surface[J]. Chinese J Lasers, 2013, 40(6): 0603002.

[13] Zhu H B, Li H, Li Z X. Plasma sprayed TiB2-Ni cermet coatings: effect of feedstock characteristics on the microstructure and tribological performance[J]. Surface & Coatings Technology, 2013, 235: 620-627.

[14] 林英华, 雷勇平, 符寒光. 激光原位制备硼化钛与镍钛合金增强钛基复合涂层[J]. 金属学报, 2014, 50(12): 1513-1519.

    Lin Yinghua, Lei Yongping, Fu Hanguang. Laser in situ synthesized titanium diboride and nitinol reinforce titanium matrix composite coatings[J]. Acta Metallurgica Sinica, 2014, 50(12): 1513-1519.

[15] 裴宇韬, 欧阳家虎, 雷廷权. 激光熔覆金属/陶瓷复合涂层中陶瓷相的行为[J]. 材料导报, 1995, 4: 60-65.

    Pei Yutao, Ouyang Jiahu, Lei Tingquan. Behaviour of ceramic particles in laser clad metal/ceramics composite coatings[J]. Materials Review, 1995, 4: 60-65.

[16] 张维平, 马海波. 激光熔覆原位析出增强颗粒热力学及显微组织研究[J]. 表面技术, 2008, 67(6): 30-32.

    Zhang Weiping, Ma Haibo. Laser cladding in-situ particle reinforced thermodynamics and coating microstructure analysis[J]. Surface Technology, 2008, 67(6): 30-32.

[17] 雷贻文, 孙荣禄, 唐英. 激光熔覆反应合成TiC和TiB2的生长机制[J]. 中国激光, 2009, 36(5): 1287-1291.

    Lei Yiwen, Sun Ronglu, Tang Ying. Growth mechanism of in-situ synthesized TiC and TiB2 by laser cladding[J]. Chinese J Lasers, 2009, 36(5): 1287-1291.

[18] 孙荣禄, 杨贤金. 激光熔覆原位合成TiC-TiB2/Ni基金属陶瓷涂层的组织和摩擦磨损性能[J]. 硅酸盐学报, 2003, 31(12): 1221-1224.

    Sun Ronglu, Yang Xianjin. Microstructure, friction and wear properties of in situ synthesized TiC-TiB2/Ni-based metallic ceramic coating by laser cladding[J]. Journal of the Chinese Ceramic Society, 2003, 31(12): 1221-1224.

[19] Du B S, Paital S R, Dahotre N B. Synthesis of TiB2-TiC/Fe nano-composite coating by laser surface engineering[J]. Optics and Laser Technology, 2013, 45: 647-635.

[20] 杜宝帅. 激光熔覆原位合成陶瓷相增强Fe基熔覆层研究[D]. 济南: 山东大学, 2009: 74- 83.

    DuBaoshuai. Study on in situ synthesized ceramic phase reinforced Fe-based coating by laser cladding[D]. Jinan: Shandong university, 2009: 74- 83.

[21] 胡赓祥, 蔡珣, 戎咏华. 材料科学基础[M]. 上海: 上海交通大学出版社, 2010, 167- 223.

    HuGengxiang, CaiXun, RongYonghua. Fundamentals of materials science[M]. Shanghai: Shanghai Jiao Tong University Press, 2010, 167- 223.

[22] Qiao Y F, Traugott E F, Andrew D. The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures[J]. Surface & Coatings Technology, 2003, 172(1): 24-41.