[1] Wang H X. Progress in thin film solar cells based on Cu2ZnSnS4[J]. International Journal of Photoenergy, 2011: 801292-801301.

[2] Wang W, Winkler M T, Gunawan O, et al. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency[J]. Advanced Energy Materials, 2014,4(7): 1301465(1-5).

[3] Mitzi D B, Gunawan O, Todorov T K, et al. The path towards a high-performance solution-processed kesterite solar cell[J]. Solar Energy Materials and Solar Cells, 2011, 95: 1421-1436.

[4] Park H, Hwang Y H, Bae B S. Sol-gel processed Cu2ZnSnS4 thin films for a photovoltaic absorber layer without sulfurization[J]. Journal of Sol-Gel Science and Technology, 2013,65: 23-27.

[5] Shin B, Gunawan O, Zhu Y, et al. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber[J]. Progress in Photovoltaics: Research and Applications, 2013,21: 72-76.

[6] Guo Q J, Hillhouse H W, Agrawal R. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells[J]. Journal of the American Chemical Society, 2009,131: 11672-11673.

[7] Shin S W, Pawar S M, Park C Y, et al. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films[J]. Solar Energy Materials and Solar Cells, 2011,95: 3202-3206.

[8] Seol J S, Lee S Y, Lee J C, et al. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process[J]. Solar Energy Materials and Solar Cells, 2003,75: 155-162.

[9] Sun L, He J, Kong H, et al. Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by pulsed laser deposition method[J]. Solar Energy Materials and Solar Cells, 2011,95: 2907-2913.

[10] He J, Sun L, Ding N F, et al. Single-step preparation and characterization of Cu2ZnSn(SxSe1-x)4 thin films deposited by pulsed laser deposition method[J]. Journal of Alloys and Compounds, 2012,529: 34-37.

[11] Tan H B, Guo C S, Ma X L. Preparation of mullite fibers by Sol-Gel process and study of their morphology[J]. Materials and Manufacturing Processes, 2011,26: 1374-1378.

[12] Tanaka K, Fukui Y, Moritake N, et al. Chemical composition dependence of morphological and optical properties of Cu2ZnSnS4 thin films deposited by sol-gel sulfurization and Cu2ZnSnS4 thin film solar cell efficiency[J]. Solar Energy Materials and Solar Cells, 2011,95: 838-842.

[13] Moritake N, Fukui Y, Oonuki M, et al. Preparation of Cu2ZnSnS4 thin film solar cells under non-vacuum condition[J]. Physica Status Solidi C, 2009,5: 1233-1236.

[14] Sun Y X, Zong K, Zheng H J, et al. Ethylene glycol-based dip coating route for the synthesis of Cu2ZnSnS4 thin film[J]. Materials Letters. 2013,92: 195-197.

[15] Jiang M, Li Y, Dhakal R, et al. Cu2ZnSnS4 polycrystalline thin films with large densely packed grains prepared by sol-gel method[J]. Journal of Photonics for Energy, 2011,1: 019501-6.

[16] Guo Q J, Ford G M, Yang W C, et al. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals[J]. Journal of the American Chemical Society, 2010,132: 17384-17386.

[17] Tanaka T, Kawasaki D, Nishio M. Fabrication of Cu2ZnSnS4 thin films by co-evaporation[J]. Physica Status Solidi C, 2006,3: 2844-2847.

[18] Yeh M Y, Lee C C, Wuu D S. Influences of synthesizing temperatures on the properties of Cu2ZnSnS4 prepared by sol-gel spin-coated deposition[J]. Journal of Sol-Gel Science and Technology, 2009,52: 65-68.

[19] Fernandes P A, Salome P M P, da Cunha A F. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films[J]. Thin Solid films, 2009,517: 2519-2523.

[20] Shi J H, Li Z Q, Zhang D W, et al. Fabrication of Cu(In,Ga)Se2 thin films by sputtering from a single quaternary chalcogenide target[J]. Progress in Photovoltaics: Research and Applications, 2011,19: 160-164.

[21] Zhou S S, Tan R Q, Jiang X, et al. Growth of CZTS thin films by sulfurization of sputtered single-layered Cu-Zn-Sn metallic precursors from an alloy target[J]. Journal of Materials Science: Materials in Electronic, 2013,24: 4958-4963.