基于内模PID控制的大型望远镜伺服系统

李洪文

光学精密工程, 2009, 17 (2): 327, 网络出版: 2009-10-09

基于内模PID控制的大型望远镜伺服系统

Servo system of large telescope based on internal model PID control method

论文大纲

李洪文 ^*

作者单位

中国科学院长春光学精密机械与物理研究所,吉林长春 130033

内模控制大型望远镜伺服控制 large telescope internal model control PID PID servo control

摘要

针对目前大型望远镜伺服系统调试参数较多的现状,基于内模PID控制方法对大型望远镜伺服系统进行了研究。介绍了内模控制设计思路,讨论了速度回路内模控制算法。分析和仿真结果证明了该算法在高精度应用场合的可实现性和较强的鲁棒性,简化了调试过程。根据一个具体项目验证了该算法的实用性,应用结果表明,该方法调试简单,一个控制环路只需要调整一、两个参数即能满足要求;高速运行时无超调,低速平稳运行达到15″,具有一定的实用性和推广价值。

Abstract

On the basis of internal model PID control method,this paper researches further the servo system of a large telescope for reducing its adjusting parameters in servo control loop. The design ideals of internal model control are introduced and the algorithm of internal model control is discussed. Analysis and simulation results verify that the algorithm simplifies the debug process; and it is feasibility and robustability for high precision application fields. The practicability of this algorithm is verified in an actual project. The application shows that this system runs stably and accurately, and has a few adjusting parameters in servo control system.Also, there is no overshoot while the speed is high and the lowest speed can reach 15″ in stable operation. The technology and methods adopted in the system are practical and worthy to be used.

参考文献

[1] 秦继荣, 沈安俊. 现代直流伺服控制技术及其系统设计[M]. 北京: 机械工业出版社. 2002.

QING J R, SHEN A J. Modern DC Servo Control Technology and System Design [M]. Beijing: Mechanical Industry Press.2002. (in Chinese)

[2] 蔡小玲,汪小帆,王执铨. 内模控制与PI控制[J]. 南京理工大学学报, 2002,26(增):47-51.

CAI X L, WANG X F, WANG ZH Q. Internal control and PI control [J]. Journal of Nanjing Institute of Engineering.2002,26(Supp.):47-51. (in Chinese)

[3] 张井岗, 曾建潮, 孙志毅. 直流电动机调速系统的内模控制[J]. 电机与控制学报, 1998,12(2):126-128.

ZHANG J G, ZENG J CH, SUN ZH Y. The IMC of DC motor speed system[J]. Journal of Motor and Control. 1998,12(2):126-128. (in Chinese)

[4] MIKE B. Servo simulation and modeling for the Gemini 8-M telescopes[J]. SPIE,2479:218-232.

[5] 赵曜. 内模控制发展综述[J]. 信息与控制,2000,29(6):526-530.

ZHAO Y. Development summary of the internal control [J]. Information and Control, 2000,29(6):526-530. (in Chinese)

[6] WANG X S, PENG G Z, YANG X. Internal model controller with diagonal recurrent neural network for pneumatic robot servo system[C]. Proceedings 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation, July 16-20, 2003:1064-1069.

[7] 李洪文.某型号大型光电经纬仪高精度伺服系统研究[D].长春:吉林大学,2007.

LI H W. Study on high precision servo control system of a large electro-optical theodolite[D]. Changchun:Graduate University of Jinlin University, 2007. (in Chinese)

[8] 张智永,范大鹏,范世殉.光电稳定跟踪装置的控制系统设计[J].光学精密工程,2006,14(2):681-688.

ZHANG ZH Y,FAN D P,FAN SH X. Servo system design for E-O stabilization and tracking devices [J]. Opt. Precision Eng., 2006, 14(2):681-688

李洪文. 基于内模PID控制的大型望远镜伺服系统[J]. 光学精密工程, 2009, 17(2): 327. LI Hong-wen. Servo system of large telescope based on internal model PID control method[J]. Optics and Precision Engineering, 2009, 17(2): 327.

基于内模PID控制的大型望远镜伺服系统

关于本站 Cookie 的使用提示

全站搜索

基于内模PID控制的大型望远镜伺服系统

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索