Data exchange between different mode channels is essential in the optical communication network with mode-division multiplexing (MDM). However, there are challenges in realizing mode exchange with low insert loss, low mode crosstalk, and high integration. Here, we designed and fabricated a mode exchange device based on multiplane light conversion (MPLC), which supports the transmission of LP01, LP11a, LP11b, and LP21 modes in the C-band and L-band. The simulated exchanged mode purities are greater than 85%. The phase masks were fabricated on a silicon substrate to facilitate the integration with optical systems, with an insert loss of less than 2.2 dB and mode crosstalk below -21 dB due primarily to machining inaccuracies and alignment errors. We carried out an optical communication experiment with 10 Gbit/s OOK and QPSK data transmission at the wavelength of 1550 nm and obtained excellent performance with the device. It paves the way for flexible data exchange as a building block in MDM optical communication networks.

Optical tweezers have proved to be a powerful tool with a wide range of applications. The gradient force plays a vital role in the stable optical trapping of nano-objects. The scalar method is convenient and effective for analyzing the gradient force in traditional optical trapping. However, when the third-order nonlinear effect of the nano-object is stimulated, the scalar method cannot adequately present the optical response of the metal nanoparticle to the external optical field. Here, we propose a theoretical model to interpret the nonlinear gradient force using the vector method. By combining the optical Kerr effect, the polarizability vector of the metallic nanoparticle is derived. A quantitative analysis is obtained for the gradient force as well as for the optical potential well. The vector method yields better agreement with reported experimental observations. We suggest that this method could lead to a deeper understanding of the physics relevant to nonlinear optical trapping and binding phenomena.

Cell identification and sorting have been hot topics recently. However, most conventional approaches can only predict the category of a single target, and lack the ability to perform multitarget tasks to provide coordinate information of the targets. This limits the development of high-throughput cell screening technologies. Fortunately, artificial intelligence (AI) systems based on deep-learning algorithms provide the possibility to extract hidden features of cells from original image information. Here, we demonstrate an AI-assisted multitarget processing system for cell identification and sorting. With this system, each target cell can be swiftly and accurately identified in a mixture by extracting cell morphological features, whereafter accurate cell sorting is achieved through noninvasive manipulation by optical tweezers. The AI-assisted model shows promise in guiding the precise manipulation and intelligent detection of high-flux cells, thereby realizing semi-automatic cell research.

A new type of power-exponent-phase vortex-like beams with both quadratic and cubic azimuthal phase gradients is investigated in this work. The intensity and orbital angular momentum (OAM) density distributions are noticeably different when the phase gradient increases or decreases along the azimuth angle, while the orthogonality and total OAM remain constant. The characteristics of the optical field undergo a significant change when the phase shifts from linear to nonlinear, with the variation of the power index having little impact on the beam characteristics under nonlinear phase conditions. These characteristics provide new ideas for applications such as particle manipulation, optical communications, and OAM encryption.

Metasurfaces, two-dimensional (2D) or quasi-2D arrays of dielectric or metallic meta-atoms, offer a compact and novel platform to manipulate the amplitude, phase, and polarization of incoming wavefronts in a desired manner by engineering the geometry of meta-atoms. In polarization control, spin-insensitive metasurfaces have attracted significant attention due to the robustness of circular polarization against the beam misalignment and multi-path effects. Till now, several efforts have been made to realize polarization-insensitive metasurfaces for circularly polarized (CP) wavefront manipulation; however, these metasurfaces only consider the cross-polarization channels and keep the co-polarization channels abandoned. Such metasurfaces cannot be considered truly spin-insensitive, as one has to carefully choose the analyzer at output. Here, by combining the polarization-insensitive geometric phase and engineered propagation phase, we propose a spin-insensitive design principle based on metasurfaces that can perform identical functionality (on co- and cross-polarization channels) irrespective of the handedness of incident/transmitted light. As a proof of concept, we design and numerically realize two types of spin-insensitive wavefront engineering devices: (1) spin-insensitive meta-hologram and (2) spin-insensitive beam deflector with power splitting functionality. The proposed work is expected to open up new avenues for developing spin-independent metasurfaces-based devices.

The optical vortex beam has widely been studied and used because of its unique orbital angular momentum (OAM). To generate and control OAM in compact and integrated systems, many metallic metasurface devices have been proposed, however, most of them suffer from the low efficiency. Here, we propose and experimentally verify a high-efficiency monolayer metallic metasurface composed of semicircular nano-grooves distributed with detour phase. The metasurface can generate single or an array of OAM with spin-sensitive modulation and achieve the maximum efficiency of 60.2% in theory and 30.44% in experiment. This work has great potential in compact OAM detection and communication systems.

We introduce a simple one-dimensional (1D) structure in the design of 1D color splitters (1D-CSs) with RGB unit cells for color imaging and propose a single-to-double-layer design in 1D-CSs. Based on inverse design metasurfaces, we demonstrate numerically a single-layer 1D-CS with a full-color efficiency of 46.2% and a double-layer 1D-CS with a full-color efficiency of 48.2%; both of them are significantly higher than that of traditional color filters. Moreover, we demonstrate a 1D-CS that has application value by evaluating the double-layer 1D-CS’s performances in terms of incident angle sensitivity, polarization angle sensitivity, and assembly tolerance.