强激光与粒子束
2022, 34(2): 026007
Author Affiliations
Abstract
Los Alamos National Laboratory, Los Alamos, NM, USA
Targets have been developed to measure supersonic radiation transport in aerogel foams using absorption spectroscopy. The target consists of an aerogel foam uniformly doped with either titanium or scandium inserted into an undoped aerogel foam package. This creates a localized doped foam region to provide spatial resolution for the measurement. Development and characterization of the foams is a key challenge in addition to machining and assembling the two foams so they mate without gaps. The foam package is inserted into a beryllium sleeve and mounted on a gold hohlraum. The target is mounted to a holder created using additive manufacturing and mounted on a stalk. The manufacturing of the components, along with assembly and metrology of the target are described here.
absorption spectroscopy doped foams radiation transport High Power Laser Science and Engineering
2017, 5(3): 03000e15
1 中国科学技术大学 近代物理系, 合肥 230026
2 中国科学技术大学 中国科学院近地空间环境重点实验室, 合肥 230026
用二维辐射流体程序Flash模拟了小焦斑纳秒激光与铝平面靶的相互作用过程,其中入射激光的聚焦半径为25 μm,峰值强度约为1013 W/cm2,波长为532 nm。模拟发现激光通道上的等离子体出现了密度排空的现象,激光焦斑外侧出现环状的射流结构。激光通道上密度排空现象对电子热输运的计算较为敏感,对比干涉实验测量的密度分布,确定了模拟中限流因子的取值为0.08。通过考察辐射致冷与电子横向热输运对等离子体膨胀运动的影响,对环状射流结构的形成原因给出了物理解释,并在模拟上验证了辐射冷却在其形成过程中的主导作用。
辐射流体程序Flash 激光烧蚀 辐射冷却 电子热输运 环状射流 radiation hydrodynamic code Flash laser ablation radiation transport electron heat transport annular jet 强激光与粒子束
2014, 26(10): 102005
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
间接驱动惯性约束聚变和高能量密度物理实验中使用黑腔作为强X射线辐射源,黑腔源靶的等效辐射温度受安装在辐射出口的实验用靶的影响而与单独进行辐射源特性研究时有所不同。通过对几种不同辐射输运靶对半黑腔辐射源的影响进行的实验研究发现,添加不同填充材料的输运管能够使测量到的黑腔辐射源的辐射温度升高3~8 eV。实验结果的统计显示,输运管越长,填充材料密度越大,辐射温度越高。
惯性约束聚变 黑腔 等效辐射温度 辐射输运 inertial confinement fusion hohlraum equivalent radiation temperature radiation transport 强激光与粒子束
2013, 25(12): 3115
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
利用空间分划的平衡辐射输运方程, 结合Multi1D辐射流体程序计算了辐射驱动内爆芯部的X光发射空间分布, 计算结果表明:高能X光的发射区域随X光子能量的增大而减小, 低能X光的发射区域随X光子能量的减小而减小。考虑芯部中间区域和芯部边缘区域物质的不透明度, 利用遗传算法计算了芯部的温度空间分布, 并与模拟结果作了比较, 二者的不确定度小于4%。
内爆芯部 空间分划辐射输运方程 遗传算法 不透明度 implosion core zone spatial radiation transport equation genetic algorithm opacity
在激光间接驱动内爆动力学过程中,软X射线烧蚀形成的高温低密度等离子体处于非局部热动平衡状态,X射线的传播需要用输运方法处理。利用简化物理模型给出了X射线烧蚀形成的高温低密度等离子体的流场空间分布,介绍了一种计算X射线反照率的方法,并给出反照率的解析表达式。
辐射烧蚀 反照率 辐射输运 软X射线 稀疏波 radiation ablation albedo radiation transport X-ray rarefaction wave