During the design process of Blu-ray disc optical pick-up (BD OPU), the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting. In this OPU, we use a triplet lens to collimate the laser beam. At the same time, we build a series of assembly jigs to make sure that each lens can be put into the OPU basement properly. At last, we get the reading spot image and S-curve photo of OPU, which can be used to read Blu-ray disc (BD).

对于下一代光盘系统而言,GaN激光器和高数值孔径(NA)的物镜是关键组件.本文介绍了几种HD-DVD光学系统物镜的设计方案,并对其进行比较研究,发现要根据不同的要求来设计物镜,对像差要求高的要采用两元件型或者三元件型物镜;而对于要求结构简单、装配容易、工作距离大的光学头,要采用单元型物镜.在解决其与CD和DVD的兼容性问题时,可采用物镜前插入补偿装置来控制物镜的数值孔径.