[1] 崔铮.微纳米加工技术及其应用［M］.北京:高等教育出版社,2009:54-55.(Cui Zheng. Micro-nano processing technology and its applications.Beijing: Higher Education Press,2009:54-55)

[2] Xiong Yi, Liu Zhaowei, Zhang Xiang. Projecting deep-subwavelength patterns from diffraction-limited masks using metal-dielectric multilayers［J］.Appl Phys Lett,2008,93: 111116.

[3] Fang N, Lee H, Sun C, et al. Sub-diffraction-limited optical imaging with a silver superlens［J］.Science,2005,308:534-537.

[4] Xu Ting, Zhao Yanhui, Ma Junxia, et al. Sub-diffraction-limited interference photolithography with metamaterials［J］.Opt Express,2008,16: 13579-13584.

[5] 王凤丹.玻璃基光刻铬掩模版的膜系研究［D］.合肥:合肥工业大学,2005:1-4.(Wang Fengdan. Research on thin films of Cr mask based on glass.Hefei: Hefei University of Technology,2005:1-4)

[6] 郭小伟. SLM无掩模光刻技术的研究［D］.成都:四川大学,2007:4-12. (Guo Xiaowei. Research on SLM-based maskless lithography.Chengdu:Sichuan University,2007:4-12)

[7] Jiang Jun. The development of lithographic technology［C］//Proc of SPIE.2002,4921:57-65.

[8] 张锦,冯伯儒,郭永康. 双光束双曝光与四光束单曝光干涉光刻方法的比较［J］.光电工程, 2005,32(12):21-24.(Zhang Jin, Feng Boru, Guo Yongkang. Comparison between double exposure with two laser beams interference and single exposure with four laser beams.Opto-Electronic Engineering,2005,32(12):21-24)

[9] 张锦,冯伯儒,刘娟. 掩模投影成像干涉光刻研究［J］.光电工程, 2006,33(2):1-4.(Zhang Jin, Feng Boru, Liu Juan. Study on imaging interferometric lithography.Opto-Electronic Engineering,2006,33(2):1-4)

[10] Raether H. Surface plasmons on smooth and rough surfaces and on grating［M］. Berlin: Springer,1988:16.

[11] Freund L B. Thin film materials-stress, defect formation and surface evolution［M］.London: Cambridge University Press,2004:167-231.

[12] Wang Xudi, Liu Ying, Xu Xiangdong, et al. Reactive ion beam etching of HfO2 film and removal of sidewall redeposition［J］.J Vac Sci Technol A,2006,24:1067-1072.

[13] Walsh M E, Hao Yaowu, Ross C A, et al. Optimization of a lithographic and ion beam etching process for nanostructuring magnetoresistive thin film stacks［J］.J Vac Sci Technol B,2000,18:3539-3543.