[1] 张光杰. 数控机床上测头的应用［J］. 宁夏机械, 2003, 2(3): 20～23

    Zhang Guangjie. Application of Measurement Head on Numerical Control Machine Tools［J］. Ning Xia Machinery, 2003, 2(3): 20～23

[2] 张虎, 达飞鹏, 邢德奎. 光学测量中椭圆圆心定位算法研究［J］. 应用光学, 2008, 29(6): 905～911

    Zhang Hu, Da Feipeng, Xing Dekui. Algorithm of centre location of ellipse in optical measurement［J］. Journal of Applied Optics, 2008, 29(6): 905～911

[3] 田原嫄, 黄合成, 谭庆昌 等. 基于机器视觉的零件尺寸测量［J］. 激光与光电子学进展, 2010, 47(1): 011501

    Tian Yuanyuan, Huang Hecheng, Tan Qingchang et al.. Size measurement of parts based on machine vision［J］. Laser & Optoelectronics Progress, 2010, 47(1): 011501

[4] 刘贱平, 梁丽萍, 黄云 等. 光纤测头在小型气体激光器微深孔检测中的应用［J］. 中国激光, 2011, 38(7): 0708002

    Liu Jianping, Liang Liping, Huang Yun et al.. Application of the optical fiber prober in measuring micro deep hole of small laser［J］. Chinese J. Lasers, 2011, 38(7): 0708002

[5] 黄劼, 周肇飞, 邓建清 等. 基于圆拟合的孔系中心坐标高精度检测方法研究［J］. 工具技术, 2004, 38(4): 47～49

    Huang Jie, Zhou Zhaofei, Deng Jianqing et al.. High precision method to detact serial hole center coordinate based on circle fitting［J］. Tool Engineering, 2004, 38(4): 47～49

[6] Wu Jianzhong, Dong Yandong, Cheng Yaping. Accurate center positiiong control and optimization during complete installation of offshore wind turbines［C］. Shanghai: Sponsored by Science and Technology Committee of Shanghai, 2000. 1～5

[7] Zhang Mingzhu, Cao Huanrong. A new method of circle′s center and radius detection in image processing［C］. International Conference on Automation and Logistics, 2008. 2239～2242

[8] 雷贤卿, 李言, 周彦伟 等. 截面最小二乘圆心偏心误差运动的分离方法［J］. 农业机械学报, 2006, 37(10): 153～156

    Lei Xianqing, Li Yan, Zhou Yanwei et al.. Separating method for eccentric motion of least square center of cross section［J］. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(10): 153～156

[9] S. Hayakawa, Y. Yamada, N. Tsuchida. Shaft insertion for moving object by using robot manipulator with one dimensional PSDs sensor［C］. Control Applications, 2004. 1118～1123

[10] S. Hayakawa, N. Tsuchida. Shaft insertion into moving object using robot manipulator with cross typed PSD［C］. Industrial Electronics Society, 2001, 3: 1527～1531

[11] 叶湘滨, 刘正春. 一种可同时测量位移和角度的电容式传感器设计［J］. 传感器技术, 2004, 23(3): 34～37

    Ye Xiangbin, Liu Zhengchun. Design of capacitive sensor for both displacement and angle measurement［J］. J. Transducer Technology, 2004, 23(3): 34～37

[12] 钱武. 气动量仪在检测中的几点体会［J］. 内燃机与配件, 2005, (6): 34～36

    Qian Wu. Experience in pneumatic measuring instrument［J］. Internal Combustion Engnine & Parts, 2005, (6): 34～36

[13] 陈浩, 邾继贵, 杨学友. 新型多方向内径尺寸测量方法［J］. 仪表技术与传感器, 2011, (1): 95～97

    Chen Hao, Zhu Jigui, Yang Xueyou. New multi-directional inner diameter measurement method［J］. Instrument Technique and Sensor, 2011, (1): 95～97

[14] 冯其波, 张志峰, 陈士谦. 一种激光位移传感器动态测量列车车轮直径的新方法［J］. 中国激光, 2008, 35(7): 1059～1062

    Feng Qibo, Zhang Zhifeng, Chen Shiqian. A novel method for dynamically measuring diameters of train wheels using laser displacement transducers［J］. Chinese J. Lasers, 2008, 35(7): 1059～1062

[15] 张志永. 精通MATLAB 6.5版［M］. 北京: 航空航天大学出版社, 2005

    Zhang Zhiyong. Proficient MATLAB 6.5［M］. Beijing : Beijing University Press, 2005

[16] 熊志勇, 赵斌. 基于梯形棱镜的激光三角法内孔测距传感器［J］. 光学学报, 2011, 31(12): 1212001

    Xiong Zhiyong, Zhao Bin. Inner hole range-finding sensor with laser triangulation based on trapezoid prism［J］. Acta Optica Sinica, 2011, 31(12): 1212001

[17] 孙长库, 叶声华. 激光测量技术［M］. 天津: 天津大学出版社, 2000

    Sun Changku, Ye Shenghua. Laser Measurement Technology［M］. Tianjin: Tianjin University Press, 2000

[18] 王涛, 仲思东, 余学锋. 对径测量传感器的激光校准方法［J］. 中国激光, 2006, 33(2): 261～265

    Wang Tao, Zhong Sidong, Yu Xuefeng. Calibration method by laser for the diameter measurement sensors［J］. Chinese J. Lasers, 2006, 33(2): 261～265

[19] 彭丁聪. 卡尔曼滤波的基础原理及应用［J］. 软件导刊, 2009, 8(11): 32～34

    Peng Dingcong. Basic principles and application of the Kalman filter［J］. Software Guide, 2009, 8(11): 32～34