强激光与粒子束, 2013, 25 (11): 2900, 网络出版: 2013-11-14   

双尺度织构的激光光刻工艺

Fabrication of two-scale texture by laser lithography
作者单位
中国矿业大学 机电工程学院, 江苏 徐州 221116
摘要
搭建了双光束激光干涉光刻系统和激光快速扫描系统。利用干涉光刻系统,实现了不同周期、不同深度、大面积的表面规则光栅织构的构筑。利用激光快速扫描器的二维扫描功能,通过控制激光功率和扫描速度,对曝光量和填充线条间距进行了优化。提出了两种双尺度复合织构的制备方法:一种是在激光快速扫描系统中对抗蚀剂表面分别进行x,y方向的扫描光刻,然后在干涉光刻系统中进行双光束干涉光刻;另一种是在激光干涉光刻系统中进行两次曝光,每次曝光的入射角不同。实验结果表明:这两种方法在制备双尺度复合织构方面具有快速、廉价、操作简易等优点。
Abstract
The systems of two-beam interference lithography and laser rapid scanning lithography were constructed. Gratings with different period and depth were fabricated over large areas by laser interference lithography. Utilizing the two-dimensional scan function of laser rapid scanner, exposure and distance between stuffers were optimized by controlling laser power and scanning speed. Two methods for two-scale texture fabrication were presented. The first one was that the photoresist which had been scanned in x and y directions by scanning lithography was exposed in interference lithography system. The second one was that photoresist was exposed twice with different incidence angle in interference lithography system. The results show that the two methods were fast, cheap and controllable for two-scale texture fabrication.
参考文献

[1] Qian B T, Shen Z Q. Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates[J]. Langmuir, 2005, 21(20): 9007-9009.

[2] 连峰,张会臣,庞连云. Ti6Al4V表面纹理制备及其润湿性[J]. 功能材料, 2011, 42(s3): 464-467.(Lian Feng, Zhang Huichen, Pang Lianyun. Fabrication of surface texture on Ti6Al4V alloy and its wettability. Journal of Functional Materials, 2011, 42(s3): 464-467)

[3] Oh S H, Kim J G, Kim C S, et al. The fabrication of 3-D nanostructures by a low-voltage EBL[J]. Applied Surface Science, 2011, 257(9): 3817-3823.

[4] 赵文杰, 曾志翔, 王立平, 等. 规则织构化硅片表面的制备及其润湿行为[J]. 中国表面工程, 2011, 24(3): 4-10.(Zhao Wenjie, Zeng Zhixiang, Wang Liping, et al. Fabrication and wetting behaviors of regular textured silicon surfaces. China Surface Engineering, 2011, 24(3): 4-10)

[5] Zhao Wenjie, Wang Liping, Xue Qunji. Fabrication of low and high adhesion hydrophobic Au surfaces with micro/nano-biomimetic structures[J]. Journal of Physical Chemistry C, 2010, 114(26): 11509-11514.

[6] Guo Zhiguang, Liu Weimin, Su Baolian. Superhydrophobic surfaces: from natural to biomimetic to functional[J]. Journal of Colloid and Interface Science, 2011, 353(2): 335-355.

[7] 江雷, 冯琳. 仿生智能纳米界面材料[M].北京: 化工工业出版社, 2007.(Jiang Lei, Feng Lin. Intelligent bionic nano interface material. Beijing: Chemical Industry Press, 2007)

[8] 陈欣, 赵青, 方亮, 等. 激光干涉光刻法制作100 nm掩模[J]. 强激光与粒子束, 2011, 23(3): 806-810.(Chen Xin, Zhao Qing, Fang Liang, et al. Fabrication of 100 nm mask by laser interference lithography. High Power Laser and Particle Beams, 2011, 23(3): 806-810)

[9] 施瑶, 胡海豹, 黄苏和, 等. 条纹沟槽表面润湿性的试验研究[J]. 测控技术, 2011, 30(11): 119-126.(Shi Yao, Hu Haibao, Huang Suhe, et al. Experimental research on wettability of riblet structure surface. Measurement and Control Technology, 2011, 30(11): 119-126)

[10] 姜亮, 马国亮, 王晓雷. PDMS表面织构润滑特性的研究[J]. 摩擦学学报, 2010, 30(3): 262-267.(Jiang Liang, Ma Guoliang, Wang Xiaolei. Lubrication properties of surface texture on PDMS. Tribology, 2010, 30(3): 262-267)

[11] 刘国强, 张锦, 周崇喜. 三光束激光干涉光刻的实现方法[J]. 强激光与粒子束, 2011, 23(12): 3250-3254.(Liu Guoqiang, Zhang Jin, Zhou Chongxi. Implementation method for three-beam laser interference lithography. High Power Laser and Particle Beams, 2011, 23(12): 3250-3254)

[12] Xu Di, Chen K P, Ohlinger K, et al. Nanoimprinting lithography of a two-layer phase mask for three-dimensional photonic structure holographic fabrications via single exposure[J]. Nanotechnology, 2011, 22(3): 5303-5308.

[13] Liu C H, Hong M H, Lum M C, et al. Large-area micro/nanostructures fabrication in quartz by laser interference lithography and dry etching[J]. Applied Physics A, 2010, 101(2): 237-241.

贺海东, 郝敬宾, 赵恩兰, 杨海峰, 唐玮, 朱华, 钱济国. 双尺度织构的激光光刻工艺[J]. 强激光与粒子束, 2013, 25(11): 2900. He Haidong, Hao Jingbin, Zhao Enlan, Yang Haifeng, Tang Wei, Zhu Hua, Qian Jiguo. Fabrication of two-scale texture by laser lithography[J]. High Power Laser and Particle Beams, 2013, 25(11): 2900.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!