[1] 张典范, 高峰. 染色体切割设备的并联宏动平台运动学传递性能[J]. 光学 精密工程, 2009, 17(8): 1896-1901.

    ZHANG D F, GAO F. Kinematics transmission property of parallel macro manipulator of cutting equipment for chromosome[J]. Opt. Precision Eng., 2009, 17(8): 1896-1901. (in Chinese)

[2] 程刚, 葛世荣, 蒋世磊. 3-UCR并联机构的瞬态运动学研究[J]. 光学 精密工程, 2008, 16(1): 108-113.

    CHENG G, GE SH R, JIANG SH L. Research on transient kinematic characteristics of 3-UCR parallel robot[J]. Opt. Precision Eng., 2008, 16(1): 108-113. (in Chinese)

[3] 崔冰艳, 金振林. 基于正交机构的机器人肩关节静力学分析与结构参数设计[J]. 光学 精密工程, 2011, 19(1): 77-82.

    CUI B Y, JIN ZH L. Statics analysis and structure parameter design of robot shoulder joint based on rothogonal mechanism[J]. Opt. Precision Eng., 2011, 19(1): 77-82. (in Chinese)

[4] CHANDRA R, ROLLAN L. On solving the forward kinematics of 3RPR planar parallel manipulator using hybrid metaheuristics[J]. Applied Methematics and Computation, 2011, 217: 8997-9008.

[5] ZEIN M, WENGER P, CHABLAT D. Non-singular assembly-mode changing motions for 3-RPR parallel manipulators[J]. Mechanism and Machine Theory, 2008, 43(4): 480-490.

[6] BINAUD N, CARO S, WENGER P. Sensitivity comparison of planar parallel manipulators[J]. Mechanism and Machine Theory, 2010, 45: 1477-1490.

[7] CHANDRA R, ROLLAND L. On solving the forward kinematics of 3RPR planar parallel manipulator using hybrid metaheuristics [J]. Applied Mathematics and Compuation, 2011, 217: 8997-9008.

[8] ARSENAULT M, BOUDREAU R. Synthesis of planar parallel mechanisms while considering workspace, dexterity stiffness and singularity avoidance[J]. ASME Journal of Mechanical Design, 2006, 128: 69-78.

[9] BONEV L A, ZLATANOV D, GOSSELIN C M. Singularity analysis of 3-dof planar parallel mechanisms via screw theory[J]. ASME Journal of Mechanical Design, 2003, 125(3): 573-581.

[10] GLAZUNOV C. Design of decoupled parallel manipulators by means of the theory of screws[J]. Mechanism and Machine Theory, 2010, 45: 239-250.

[11] GOGU G. Fully-isotropic over-constrained planar parallel manipulators[C]. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, Sendai, Japan, 2004, 3519-3524.

[12] 张彦斌, 刘宏昭, 吴鑫. 基于互易螺旋理论的无奇异完全各向同性移动并联机构型综合[J]. 机械工程学报, 2008, 44(10): 83-88.

    ZHANG Y B, LIU H ZH, WU X. Type synthesis of non-singular fully-isotropic translational parallel mechanisms based on theory of reciprocal screw[J]. Chinese Jounal of Mechanical Engineering, 2008, 44(10): 83-88. (in Chinese)