[1] 丁文政, 黄筱调, 汪木兰. 面向大型机床再制造的进给系统动态特性［J］. 机械工程学报, 2011, 47(3): 135～140

    Ding Wenzheng, Huang Xiaodiao, Wang Mulan. Dynamic characteristics of feed system for large-scale machine tool remanufacturing［J］. J. Mechanical Engineering, 2011, 47(3): 135～140

[2] 赫英威, 李平, 冯国进. 大口径光学系统测试用双回转子孔径扫描装置设计与误差分析［J］. 光学学报, 2011, 31(1): 0112004

    He Yingwei, Li Ping, Feng Guojin. Analysis of a sub-aperture scanning machine with double rotating arms for large-aperture optical system transmittance measurements［J］. Acta Optica Sinica, 2011, 31(1): 0112004

[3] 史庆伟. 特种脆性材料回转体零件内外表面自动测量系统研究［D］. 天津: 天津大学, 2007

    Shi Qingwei. A Study on the Automatic System for Measuring Inner and Outer Surfaces of Rovolving Parts Made of Special Brittle Materials［D］. Tianjin: Tianjin University, 2007

[4] 现代使用机床设计手册编委会. 现代使用机床设计手册［M］. 北京: 机械工业出版社, 2006. 496～499

    Modern Use and Design Manual for Machine Tool Editorial Board. Modern Use and Design Manual for Machine Tool［M］. Beijing: China Machine Press, 2006. 496～499

[5] 卓兴仁, 黄昝. 导轨对回转轴线的平行度误差分离法［J］. 计量技术, 1999, (4): 10～13

    Zhuo Xingren, Huang Zan. The parallelism error separation between the guidyway and the axis of rotation［J］. Measurement Technique, 1999, (4): 10～13

[6] 雷贤卿, 周彦伟, 李言 等. 机床导轨对主轴回转轴线平行度的精密测量［J］. 制造技术与机床, 2006, 15(5): 68～70

    Lei Xianqing, Zhou Yanwei, Li Yan et al.. Precision measurement of parallelism error between machine guideway and the axis of spindle［J］. Manufacturing Technology & Machine Tool, 2006, 15(5): 68～70

[7] S. Weikert. R-Test, a new device for accuracy measurements on five axis machine tools［J］. CIRP Annals-Manufacturing Technology, 2004, 53(1): 429～432

[8] B. Bringmann, P. Maglie. A method for direct evaluation of the dynamic 3D path accuracy of NC machine tools［J］. CIRP Annals-Manufacturing Technology, 2009, 58(1): 343～346

[9] 王仲, 苏野, 刘新波 等. 回转激光位移传感器逼近式孔心定位方法［J］. 中国激光, 2012, 39(6): 0608001

    Wang Zhong, Su Ye, Liu Xinbo et al.. An approximation hole center positioning method by rotating laser displacement sensor［J］. Chinese J. Lasers, 2012, 39(6): 0608001

[10] 樊玉铭, 张国雄, 高翔 等. 基于时间差法主动调焦式激光测头的研究［J］. 中国激光, 2005, 32(4): 514～518

    Fan Yuming, Zhang Guoxiong, Gao Xiang et al.. A study of dynamic confocal laser probe based on time difference measurement［J］. Chinese J. Lasers, 2005, 32(4): 514～518

[11] 孙长库, 叶声华. 激光测量技术［M］. 天津: 天津大学出版社, 2000

    Sun Changku, Ye Shenghua. Laser Measurement Technology［M］. Tianjin: Tianjin University Press, 2000

[12] 熊志勇, 赵斌. 基于梯形棱镜的激光三角法内孔测距传感器［J］. 光学学报, 2011, 31(12): 1212001

    Xiong Zhiyong, Zhao Bin. Inner hole range-finding sensor with laser triangulation based on trapezoid prism［J］. Acta Optica Sinica, 2011, 31(12): 1212001

[13] 桑宏强, 刘丽冰, 刘芬 等. 触发式测头在确定工件坐标系中的应用［J］. 机床与液压, 2009, 37(8): 169～170

    Sang Hongqiang, Liu Libing, Liu Fen et al.. The application of touch trigger probe in setting workpiece coordinate system［J］. Machine Tool and Hydraulics, 2009, 37(8): 169～170

[14] 徐洋, 唐锋, 王向朝 等. 平面面形绝对检验技术测量误差分析［J］. 中国激光, 2011, 38(10): 1008009

    Xu Yang, Tang Feng, Wang Xiangzhao et al.. Measurement error analysis of absolute flatness test［J］. Chinese J. Lasers, 2011, 38(10): 1008009

[15] 王高文, 曲兴华, 邢书剑 等. 大直径内孔自动测量机构倾斜度测量研究［J］. 仪器仪表学报, 2011, 32(1): 63～68

    Wang Gaowen, Qu Xinghua, Xing Shujian et al.. Research on inclination measurement in large size pipe for automatic measuring machine［J］. Chinese J. Scientific Instrument, 2011, 32(1): 63～68

[16] 蒋家东, 袁道成, 蒲洁. 非接触法在线测量和调整圆柱轴线同轴度研究［J］. 计量技术, 2005, (9): 19～22

    Jiang Jiadong, Yuan Daocheng, Pu Jie. Online non-contact method to measure and adjust the concentricity of the cylindrical axis［J］. Measurement Technique, 2005, (9): 19～22

[17] 敖磊, 谭久彬, 崔继文 等. 一种快速高精度激光CCD自准直仪圆目标中心的定位方法［J］. 光学学报, 2007, 27(2): 253～258

    Ao Lei, Tan Jiubin, Cui Jiwen et al.. Fast and precise center location for circle target of CCD laser autocollimator［J］. Acta Optica Sinica, 2007, 27(2): 253～258