激光冲击对不锈钢焊接结构影响的数值分析
[1] 张书奎, 罗植廷. 浅析焊接残余应力及其消除方法[J]. 冶金动力, 1996, (6): 38~41
Zhang Shukui,Luo Zhiting. Analysis of residual stress produced by welding and its elimination methods[J]. Metallurgical Power, 1996, (6): 38~41
[2] Liu Yong, Shen Naijie. Residual stresses analysis for actual material model of autofrettaged tube by non-linear boundary element method[J]. International J. Pressure Vessels and Piping, 1991, 48(1): 10~25
[3] J. N. Johnson, R. W. Rhode. Dynamic deformation twinning in shock-loaded iron[J]. J. Appl. Phys., 1971, 42(11): 4171~4182
[4] 陈家权, 沈炜良, 尹志新 等. 基于单元生死的焊接温度场模拟计算[J]. 热加工工艺, 2005, 34(7): 64~65
Chen Jiaquan, Shen Weiliang, Yin Zhixin et al.. Simulation of welding temperature distribution based on element birth and death[J]. Hot Working Technology, 2005, 34(7): 64~65
[5] 陈瑞芳, 花银群, 蔡兰. 激光冲击波诱发的钢材料残余应力的估算[J]. 中国激光, 2006, 33(2): 278~282
[6] 赵学荣, 朱援祥, 孙秦明. 对接焊缝残余应力的有限元分析[J]. 焊接技术, 2003, 32(5): 14~15
Zhao Xuerong, Zhu Yuanxiang, Sun Qinming. Analysis of finite element of residual stresses in butt welds[J]. Welding Technology, 2003, 32(5): 14~15
[7] P. Merrien, H. P. Lieurade, P. Peyre et al.. Laser shock processing of aluminium alloys: application to high cycle fatigue behaviour[J]. Materials Science and Engineering: A,1996, 210(1): 102~113
[8] 刘世伟. 激光冲击处理技术研究[D]. 合肥: 中国科学技术大学, 2000
Liu Shiwei. The Research of Laser Shock Processing Technology[D]. Hefei: University of Science and Technology of China, 2000
[9] 倪红芳, 凌祥, 彭薇薇. 玻璃喷丸处理提高304不锈钢焊接接头抗应力腐蚀性能的研究[J]. 中国腐蚀与防护学报, 2005, 25(3): 152~156
Ni Hongfang, Ling Xiang, Peng Weiwei. Prevention of stress corrosion cracking in weld joint of type 304 stainless steel by class-bead peening[J]. J. Chinese Society for Corrosion and Protection, 2005, 25(3): 152~156
[10] 周建忠, 樊玉杰, 黄舒 等. 激光微喷丸强化技术的研究与展望[J]. 中国激光, 2011, 38(6): 0601003
[11] J. Goldak, A. Chakravarti, M. Bibby. A new finite element model for welding heat sources[J]. Metallurgical and Materials Transactions, 1984, B15(2): 299~305
[12] 倪红芳, 凌祥, 涂善东. 多道焊三维残余应力场有限元模拟[J]. 机械强度, 2004, 26(2): 110~117
Ni Hongfang, Ling Xiang, Tu Shandong. Simulation of 3D residual stresses field of multi-pass welding by fem[J]. J. Mechanical Strength, 2004, 26(2): 110~117
[13] Wang Xucheng, Shao Min. The Basic Principle of Finite Element Method and Numerical Method[M]. Beijing: Tsinghua University Press, 1997. 3
殷苏民, 张超, 王匀, 许桢英, 江文林. 激光冲击对不锈钢焊接结构影响的数值分析[J]. 中国激光, 2013, 40(5): 0503005. Yin Sumin, Zhang Chao, Wang Yun, Xu Zhenying, Jiang Wenlin. Numerical Analysis for the Structure Effect on Stainless Steel Welding Treated by Laser Shock Processing[J]. Chinese Journal of Lasers, 2013, 40(5): 0503005.