光学学报, 2011, 31 (11): 1112007, 网络出版: 2011-09-16   

基于摄影测量校正的斜光轴数字图像相关方法

Slant-Axis Digital Image Correlation Method Based on Photogrammetric Correction
作者单位
西安交通大学机械工程学院, 陕西 西安 710049
摘要
提出一种针对单相机、斜光轴测量条件下,基于摄影测量校正的二维数字图像相关法(DIC)。变形前,在被测物表面粘贴不少于3个控制点(圆形标志点),通过摄影测量技术得到控制点的三维坐标,利用控制点的三维坐标及其在图像上对应的二维坐标,通过空间后方交会法得到斜光轴相机的三维空间方位,拟合控制点的三维坐标得到控制面。变形过程中,对于数字图像匹配得到的每一个相关图像点,通过其投影射线与控制面相交得到其对应的三维点坐标。该方法不仅可以校正由于相机光轴倾斜引入的测量误差,而且可以直接、准确得到三维空间位移而不是像素级位移。通过与已有的三维DIC对比,该方法的位移测量精度优于0.04 mm,应变测量精度优于0.5%。
Abstract
A novel single-camera two-dimensional digital image correlation method based on photogrammetry correction is developed for the situation that the camera axis is not perpendicular to the surface of the specimen. Before deformation, at least three control points (circle mark point) are placed on the specimen surface, and the three-dimensional (3D) coordinates of the control points are measured by the photogrammetry. Then the camera orientation is calculated by the space resection method, and a control plane is obtained by fitting the control points. During deformation process, for each point in the image matched by digital image correlation, its corresponding 3D point is acquired by intersecting between the point ray and the control plane. Using this method, not only the measurement error introduced by slant axis of the camera is corrected, but also the displacement in millimeters rather than in pixels can be gained directly. Experimental results comparing with the existing 3D digital image correlation method show that, the displacement measurement accuracy by the proposed method is better than 0.04 mm, and the strain measurement accuracy is better than 0.5%.
参考文献

[1] T. Chu, W. Ranson, M. Sutton. Applications of digital-image-correlation techniques to experimental mechanics[J]. Experimental Mechanics, 1985, 25(3): 232~244

[2] 潘兵, 吴大方. 基于带通滤波成像的高温数字图像相关方法[J]. 光学学报, 2011, 31(2): 59~66

    Pan Bing, Wu Dafang. High-temperature digital image correlation method based on optical band-pass filtering imaging[J]. Acta Optica Sinica, 2011, 31(2): 59~66

[3] 潘兵, 谢惠民, 夏勇 等. 数字图像相关中基于可靠变形初值估计的大变形测量[J]. 光学学报, 2009, 29(2): 400~406

    Pan Bing, Xie Huimin, Xia Yong et al.. Large-deformation measurement based on reliabel initial guess in digital image correaltion method[J]. Acta Optica Sinica, 2009, 29(2): 400~406

[4] 史红健, 计宏伟, 何小元. 一种三维变形光学测量系统及微结构力学性能测试应用[J]. 光学学报, 2011, 31(3): 135~140

    Shi Hongjian, Ji Hongwei, He Xiaoyuan. Optical 3D deformation measurement system and its application to investigation of mechanical behaviors of micro structure[J]. Acta Optica Sinica, 2011, 31(3): 135~140

[5] 叶南, 张丽艳. 大变形下基于数字图像相关的改进分段位移传递法[J]. 光学学报, 2010, 30(4): 976~983

    Ye Nan, Zhang Liyan. Improved fractionized displacement transfer algorithm based on digital image correlation in large deformation applications[J]. Acta Optica Sinica, 2010, 30(4): 976~983

[6] P. F. Luo, Y. J. Chao, M. A. Sutton. Application of stereo vision to three-dimensional deformation analyses in fracture experiments[J]. Opt. Engng., 1994, 33(3): 981~990

[7] B. Pan, K. M. Qian, H. M. Xie et al.. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review[J]. Measurement Science & Technology, 2009, 20(6): 062001~062017

[8] M. A. Sutton, S. R. McNeill, J. D. Helm et al.. Advances in two-dimensional and three-dimensional computer vision[J]. Photo-Mechanics, 2000, 77: 323~372

[9] 叶南, 张丽艳. 基于立体视觉的板料塑性应变比测量[J]. 光学学报, 2010, 30(12): 3515~3523

    Ye Nan, Zhang Liyan. Determining plastic strain ratio of sheet metal based on stereo vision[J]. Acta Optica Sinica, 2010, 30(12): 3515~3523

[10] 孟利波, 金观昌, 姚学锋. DSCM中摄像机光轴与物面不垂直引起的误差分析[J]. 清华大学学报(自然科学版), 2006, 46(11): 19301932 19~36

    Meng Libo, Jin Guanchang, Yao Xuefeng. Errors caused by misalignment of the optical camera axis and the object surface in the DSCM[J]. J. Tsinghua Univ. (Sci. & Tech.), 2006, 46(11): 19301932 19~36

[11] 龚昊, 吕乃光, 娄小平 等. 二维视觉测量中光轴与载物台垂直度调节方法[J]. 北京机械工业学院学报, 2006, 21(3): 35~38

    Gong Hao, Lü Naiguang, Lou Xiaoping et al.. A method of verticality adjusting between optical axis and carrier in two-dimensional vision measurement[J]. J. Beijing Institute of Machinery, 2006, 21(3): 35~38

[12] 赵晶晶, 白瑞林, 李杜 等. 嵌入式机器视觉光轴与物面垂直度调节新方法[J]. 光电工程, 2010, 37(5): 63~69

    Zhao Jingjing, Bai Ruilin, Li Du et al.. A new method of verticality adjusting between optical axis and object surface of embedded machine vision controller[J]. Opto-Electronic Engineering, 2010, 37(5): 63~69

[13] Jeffrey D. Helm, J. R. Deaner. Off-axis two-dimensinonal digital image correlation [C]. Proc 2004 SEM X Int. Congress & Exposition on Experimental and Applied Mechanics, 2004-06-7-10 Connecticut: SEM, 2004: Costa Mesa, 2004

[14] 陈大庆, 顾济华. 斜光轴数字图像相关法动态位移测量研究[J]. 光电子技术与信息, 2005, 18(2): 89~93

    Chen Daqing, Gu Jihua. Study on the digital image correlation method for dynamic displacement measurement in the case of slant optical axis[J]. Optoelectronic Technology & Information, 2005, 18(2): 89~93

[15] 唐正宗, 梁晋, 肖振中 等. 用于三维变形测量的数字图像相关系统[J]. 光学精密工程, 2010, 18(10): 2244~2253

    Tang Zhengzong, Liang Jin, Xiao Zhengzhong et al.. Digital image correlation system for three-dimensional deformation measurement[J]. Opt. & Precision Engng., 2010, 18(10): 2244~2253

[16] B. Pan, H. Xie, Z. Wang. Equivalence of digital image correlation criteria for pattern matching[J]. Appl. Opt., 2010, 49(28): 5501~5509

[17] B. Pan, A. Asundi, H. Xie et al.. Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements[J]. Opt. & Lasers in Engng., 2009, 47(7-8): 865~874

[18] 张德海, 梁晋, 唐正宗 等. 大型复杂曲面产品近景工业摄影测量系统开发[J]. 光电工程, 2009, 36(5): 122~128

    Zhang Dehai, Liang Jin, Tang Zhengzong et al.. Exploitation and study of close range industry photogrammetry system based on large-scale complex surface products[J]. Opto-Electronic Engineering, 2009, 36(5): 122~128

[19] T. Luhmann, S. Robson, S. Kyle et al.. Close Range Photogrammetry: Principles, Techniques and Applications[M]. UK: Whittles Publishing, 2006

[20] S. Yoneyama, H. Kikuta, A. Kitagawa et al.. Lens distortion correction for digital image correlation by measuring rigid body displacement[J]. Opt. Engng., 2006, 45(2): 023602~023609

[21] Z. Xiao, J. Liang, D. Yu et al.. An accurate stereo vision system using cross-shaped target self-calibration method based on photogrammetry[J]. Opt. & Lasers in Engng., 2010, 48(12): 1252~1261

[22] J. W. Liu, J. Liang, X. H. Liang et al.. Videogrammetric system for dynamic deformation measurement during metal sheet welding processes[J]. Opt. Engng., 2010, 49(3): 033601~033608

[23] 潘兵, 谢惠民. 数字图像相关中基于位移场局部最小二乘拟合的全场应变测量[J]. 光学学报, 2007, 27(11): 1980~1986

    Pan Bing, Xie Huimin. Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method[J]. Acta Optica Sinica, 2007, 27(11): 1980~1986

[24] M. A. Sutton, J. H. Yan, V. Tiwari et al.. The effect of out-of-plane motion on 2D and 3D digital image correlation measurements[J]. Opt. & Lasers in Engng., 2008, 46(10): 746~757

唐正宗, 梁晋, 郭成. 基于摄影测量校正的斜光轴数字图像相关方法[J]. 光学学报, 2011, 31(11): 1112007. Tang Zhengzong, Liang Jin, Guo Cheng. Slant-Axis Digital Image Correlation Method Based on Photogrammetric Correction[J]. Acta Optica Sinica, 2011, 31(11): 1112007.

本文已被 11 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!