[1] Whitehouse D J. Surface metrology[J]. Measurement Science and Technology, 1997, 8(9): 955-972.

[2] 吴松青. 表面粗糙度应用指南[M]. 北京: 机械工业出版社, 1990.

    Wu SQ. Application guide of surface roughness [M]. Beijing: China Machine Press, 1990.

[3] 何宝凤, 丁思源, 魏翠娥, 等. 三维表面粗糙度测量方法综述[J]. 光学精密工程, 2019, 27(1): 78-93.

    He B F, Ding S Y, Wei C E, et al. Review of measurement methods for areal surface roughness[J]. Optics and Precision Engineering, 2019, 27(1): 78-93.

[4] Young R D. Surface microtopography[J]. Physics Today, 1971, 24(11): 42-49.

[5] Suganuma T. Measurement of surface topography using SEM with two secondary electron detectors[J]. Journal of Electron Microscopy, 1985, 34(4): 328-337.

[6] 朱星. 扫描近场光学显微镜[J]. 现代科学仪器, 1996( 4): 7- 9.

    ZhuX. Scanning near-field optical microscope[J]. Modern Scientific Instruments, 1996( 4): 7- 9.

[7] Dürig U, Pohl D W, Rohner F. Near-field optical-scanning microscopy[J]. Journal of Applied Physics, 1986, 59(10): 3318-3327.

[8] 韩香娥, 吴振森. 金属基及涂层表面粗糙度的测量方法研究[J]. 应用光学, 1996, 17(1): 38-43.

    Han X G, Wu Z S. Study of measuring method of surface roughness for metal base and coating[J]. Journal of Applied Optics, 1996, 17(1): 38-43.

[9] 常素萍. 基于白光干涉轮廓尺寸与形貌非接触测量方法和系统[D]. 武汉: 华中科技大学, 2007.

    Chang SP. Non-contact measurement method and system based on white light interference contour size and morphology[D]. Wuhan: Huazhong University of Science and Technology, 2007.

[10] Caber P J. Interferometric profiler for rough surfaces[J]. Applied Optics, 1993, 32(19): 3438-3441.

[11] 陈竹, 姜宏振, 刘旭, 等. 数字全息术用于光学元件表面缺陷形貌测量[J]. 光学精密工程, 2017, 25(3): 576-583.

    Chen Z, Jiang H Z, Liu X, et al. Measurement of surface defects of optical elements using digital holography[J]. Optics and Precision Engineering, 2017, 25(3): 576-583.

[12] Minsky M. Microscopy apparatus: 3013467[P].1961-12-19.

[13] 童晓蕾, 李玉和, 林浩山, 等. 超精表面三维形貌相移干涉检测实验研究[J]. 电子测量与仪器学报, 2009, 23(12): 65-69.

    Tong X L, Li Y H, Lin H S, et al. Research on phase-shifting interferometry contrast three-dimensional topography of ultra precision surface[J]. Journal of Electronic Measurement and Instrument, 2009, 23(12): 65-69.

[14] 陈刚, 周文静, 胡祯, 等. 表面粗糙度数字全息检测[J]. 应用光学, 2014, 35(6): 1040-1047.

    Chen G, Zhou W J, Hu Z, et al. Surface roughness measurement based on digital holography[J]. Journal of Applied Optics, 2014, 35(6): 1040-1047.

[15] 全国产品几何技术规范标准化技术委员会. 术语、定义及表面结构参数: GB/T 3505-2009[S].北京: 中国标准出版社, 2009.

    National Technical Committee for Standardization of Geometrical Product Specifications. Terms,definitions and surface texture parameters: GB/T 3505-2009 [S]. Beijing: China Standard Press, 2009.

[16] 全国产品几何技术规范标准化技术委员会. 线性轮廓滤波器: GB/Z 26958. 20-2011[S]. 北京: 中国标准出版社, 2011.

    National Technical Committee for Standardization of Geometrical Product Specifications. Linear profile filters: GB / Z 26958.20-2011 [S]. Beijing: China Standard Press, 2011.

[17] International Organization forStandardization. Gaussian filters: ISO 16610-21-2011[S]. London: International Organization for Standardization, 2011.

[18] 全国产品几何技术规范标准化技术委员会. 评定表面结构的规则和方法: GB/T 10610-2009[S].北京:中国标准出版社, 2009.

    National Technical Committee for Standardization of Geometrical Product Specifications. Rules and procedures for the assessment of surface texture: GB/T 10610-2009 [S]. Beijing: China Standard Press, 2009.

[19] 全国产品几何技术规范标准化技术委员会. 接触(触针)式仪器的标称特性: GB/T 6062-2009[S].北京:中国标准出版社, 2009.

    National Technical Committee for Standardization of Geometrical Product Specifications. Nominal characteristic of contact (stylus)instruments: GB/T 6062-2009[S].Beijing: China Standard Press, 2009.