基于模态匹配法的接触刚度
[1] Preissner C, Cease H, Collins J, et al. Nostradamus and the synchrotron engineer: Key aspects of predicting accelerator structural response［C］//International Conference on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation. 2016: 272-276.
[2] Nudell J, Liu Z, Preissner C, et al. Preliminary design and analysis of the FODO module support system for the APS-U storage ring［C］//International Conference on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation. 2016: 83-86.
[3] Cianciosi F, Brochard T, Marion P, et al. The girder system for the new ESRF storage ring［C］//International Conference on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation. 2016: 147-151.
[4] 陈学前, 沈展鹏, 刘信恩, 等. 地脉动环境下反射镜架系统的镜片转角响应计算［J］. 强激光与粒子束, 2018, 30: 072001. (Chen Xueqian, Shen Zhanpeng, Liu Xin’en, et al. Analysis on rotation angle of mirror in reflector system under ground random vibration. High Power Laser and Particle Beams, 2018, 30: 072001)
[5] 王坤, 何静, 游安清. 光束-靶面入射角非接触式测量方法分析［J］. 强激光与粒子束, 2014, 26: 101010. (Wang Kun, He Jing, You Anqing. Analysis on non-contact measurement of ray-target incident angle. High Power Laser and Particle Beams, 2014, 26: 101010)
[6] 张敏, 赵平, 张蓉. 气浮隔振平台模态实验分析［J］. 强激光与粒子束, 2013, 25(S0): 87-90. (Zhang Min, Zhao Ping, Zhang Rong. Application of black-box testing technologies to command and control subsystem software testing. High Power Laser and Particle Beams, 2013, 25(S0): 87-90)
[7] 杨航, 汪玉兰, 汪雪, 等. 精密热处理过程温度测量多模态重构方法［J］. 强激光与粒子束, 2019, 31: 012003. (Yang Hang, Wang Yulan, Wang Xue, et al. Multimodal reconstruction method of precision heat treatment process's temperature measurement. High Power Laser and Particle Beams, 2019, 31: 012003)
[8] 田小龙, 王雯, 傅卫平, 等. 考虑微凸体相互作用的机械结合面接触刚度模型［J］. 机械工程学报, 2017, 53(17): 149-159. (Tian Xiaolong, Wang Wen, Fu Weiping, et al. Contact stiffness model of mechanical joint surfaces considering the asperity interactions. 2017, 53(17): 149-159)
[9] Greenwood J, Williamson J. Contact of nominally flat surfaces［J］. Proceedings of the Royal Society, 1966, 295(42): 300-319.
[10] Chang W, Etsion I, Bogy D. An elastic-plastic model for the contact of rough surfaces［J］. Journal of Tribology, 1987, 109(2): 257-263.
[11] Zhao Yongwu, Maietta D, Chang Liang. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow［J］. Journal of Tribology, 1999, 122(1): 86-93.
[12] Zhao Yongwu, Chang Liang. A model of asperity interactions in elastic-plastic contact of rough surfaces［J］. Journal of Tribology, 2000, 123(4): 857-864.
[13] Kogut L, Etsion I. A finite element based elastic-plastic model for the contact of rough surfaces［J］. Tribology Transactions, 2003, 46(3): 383-390.
[14] Nuri K, Halling J. The normal approach between rough flat surfaces in contact［J］. Wear, 1975, 32(1): 81-93.
[15] WangHaijing, Li Chunhua, Zhu Hongyan, et al. Test of magnet girder prototypes for HEPS-TF［C］//International Particle Accelerator Conference. 2018: 76-79.
王梓豪, 李春华, 王之琢, 王海静, 屈化民. 基于模态匹配法的接触刚度[J]. 强激光与粒子束, 2019, 31(8): 085101. Wang Zihao, Li Chunhua, Wang Zhizhuo, Wang Haijing, Qu Huamin. Contact stiffness measurement based on modal matching method[J]. High Power Laser and Particle Beams, 2019, 31(8): 085101.
PDF全文
