基于区域二值编码方法的动态三维形貌测量

黄华权; 吴庆阳; 贺威

doi:doi:10.3788/cjl201340.1008004

中国激光, 2013, 40 (10): 1008004, 网络出版: 2013-09-06

基于区域二值编码方法的动态三维形貌测量

Dynamic Three-Dimensional Shape Measurement Based on Regional Binary Encoding Method

论文大纲

黄华权 ^*吴庆阳贺威

作者单位

深圳大学电子科学与技术学院, 深圳市微纳光子信息技术重点实验室, 广东深圳 518060

测量动态三维形貌测量二值编码动态测量硬件模块 measurement dynamic three-dimensional shape measurement binary code dynamic measurement hardware module

摘要

提出一种应用于结构光投影三维面形测量的基于区域的二值编码方法。该方法根据被测物体表面的最大起伏来确定区域编码范围和二值编码图案，然后利用基准区域级次直接获得变形条纹的连续相位分布，在保证可靠性和精度的前提下有效地减少了编码图案数量，提高了测量速度；同时，设计了用于动态三维形貌测量系统的硬件模块。该模块实现了240 frame/s的条纹投影与同步采集，满足了动态三维形貌采集的要求。实验测量采用6幅图案实现了40 frame/s的三维形貌采集，实现了动态三维形貌测量，相关实验结果证明了该技术的可行性。

Abstract

A regional binary encoding method that applied in the structured light projection three-dimensional (3D) shape measurement is proposed. This method determines the region encoding range and binary encoding patters according to the maximum depth of the surface of measured object. Then the continuous phase distribution of the deformed fringe can be acquired directly by using the basic regional order. On the premise of guaranteeing the reliability and accuracy, this technique can effectively reduce the number of encoded patterns and improve the measurement speed. Meanwhile, hardware module used in the dynamic three-dimensional shape measurement system is designed, which can achieve high-speed fringe projection and synchronized image capture at 240 frame/s and meet the requirements of dynamic 3D shape acquisition. Experimental measurement uses six patterns to accomplish the 3D shape acquisition at a speed of 40 frame/s, which realizes the dynamic 3D shape measurement. The experimental results are presented to demonstrate the feasibility of this technique.

参考文献

[1] 刘常杰, 杨学友, 叶声华. 采用LCD 投影实现三维曲面测量技术研究[J]. 电子测量与仪器学报, 2005, 19(2): 41-44.

Liu Changjie, Yang Xueyou, Ye Shenghua. A new visual technology of 3-D measurement using LCD projection[J]. Journal of Electronic Measurement and Instrument, 2005, 19(2): 41-44.

[2] G Sansoni, M Trebeschi, F Docchio. State-of-the-art and applications of 3-D imaging sensors in industry, cultural heritage, medicine, and criminal investigation[J]. Sensors, 2009, 9(1): 568-601.

[3] 边心田, 苏显渝, 陈文静. 基于条纹投影的三维坐标测量方法[J]. 光学学报, 2010, 30(2): 416-420.

Bian Xintian, Su Xianyu, Chen Wenjing. Analysis on 3-D object measurement based on fringe projection[J]. Acta Optica Sinica, 2010, 30(2): 416-420.

[4] 朱荣刚, 朱日宏, 李建欣. 一种虚条纹相移算法在结构光三维测量中的应用[J]. 中国激光, 2012, 39(s1): s108003.

Zhu Ronggang, Zhu Rihong, Li Jianxin. Application of virtual grating phase-shifting fringe method for three-dimensional shape measurement[J]. Chinese J Lasers, 2012, 39(s1): s108003.

[5] 戴美玲, 杨福俊, 耿敏. 单幅彩色条纹投影的不连续物体表面三维形貌测量[J]. 光学学报, 2012, 32(4): 0412005.

Dai Meiling, Yang Fujun, Geng Min. Single color fringe projection for measuring three-dimensional shapes with discontinuities[J]. Acta Optica Sinica, 2012, 32(4): 0412005.

[6] 王露阳, 达飞鹏. 基于互补色编码条纹投影的三维形貌测量方法[J]. 光学学报, 2011, 31(6): 0612004.

Wang Luyang, Da Feipeng. Three-dimensional shape measurement technique based on complementary color-encoded fringe projection[J]. Acta Optica Sinica, 2011, 31(6): 0612004.

[7] Peisen S Huang, Chengping Zhang, Fu-Pen Chiang. High-speed 3-D shape measurement based on digital fringe projection[J]. Opt Eng, 2003, 42(1): 163-168.

[8] Song Zhang, Peisen S Huang. High-resolution, real-time three-dimensional shape measurement[J]. Opt Eng, 2006, 45(12): 123601.

[9] Chao Zuo, Qian Chen, Guohua Gu. High-speed three-dimensional profilometry for multiple objects with complex shapes[J]. Opt Express, 2012, 20(17): 19493-19510.

[10] 张启灿, 苏显渝. 动态三维面形测量的研究进展[J]. 激光与光电子学进展, 2013, 50(1): 010001.

Zhang Qican, Su Xianyu. Research progress of dynamic three-dimensional shape measurement[J]. Laser & Optoelectronics Progress, 2013, 50(1): 010001.

[11] Qican Zhang, Xianyu Su. High-speed optical measurement for the drumhead vibration[J]. Opt Express, 2005, 13(8): 3110-3116.

[12] 于晓洋, 吴海滨, 尹丽萍. 格雷码与相移结合的结构光三维测量技术[J]. 仪器仪表学报, 2007, 28(12): 2152-2157.

Yu Xiaoyang, Wu Haibin, Yin Liping. 3D measurement technology based on structured light by combining Gray code with phase-shift[J]. Chinese Journal of Scientific Instrument, 2007, 28(12): 2152-2157.

[13] 孙学真, 苏显渝, 邹小平. 基于互补型光栅编码的相位展开[J]. 光学学报, 2008, 28(10): 1947-1951.

Sun Xuezhen, Su Xianyu, Zou Xiaoping. Phase unwrapping based on complementary structured light binary code[J]. Acta Optica Sinica, 2008, 28(10): 1947-1951.

黄华权, 吴庆阳, 贺威. 基于区域二值编码方法的动态三维形貌测量[J]. 中国激光, 2013, 40(10): 1008004. Huang Huaquan, Wu Qingyang, He Wei. Dynamic Three-Dimensional Shape Measurement Based on Regional Binary Encoding Method[J]. Chinese Journal of Lasers, 2013, 40(10): 1008004.

基于区域二值编码方法的动态三维形貌测量

关于本站 Cookie 的使用提示

全站搜索

基于区域二值编码方法的动态三维形貌测量

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索