强激光与粒子束, 2005, 17 (12): 1839, 网络出版: 2006-04-28  

金属间化合物Cu4Al纳米微粉的热稳定性研究

Thermal stability of nanocrystalline intermetallic compound Cu4Al powder
作者单位
1 中国工程物理研究院激光聚变研究中心,四川,绵阳,621900
2 四川大学原子与分子物理研究所,四川,成都,610065
摘要
对采用自悬浮定向流法制备的Cu4Al纳米微粉进行了差热分析(DTA),发现在258,423和537℃存在不同量值的吸热峰.参照DTA曲线上吸热峰所对应的温度,分别对粉末样品进行了模拟退火实验,热处理后样品的X射线衍射(XRD)分析证实258和423℃处无结构相变发生,537℃处的吸热峰则对应于从Cu4Al向Cu3Al的相转变,并且伴随着Cu3Al晶粒的长大.对比实验结果表明,Cu4Al纳米微粉在440℃以下具有非常好的热稳定性,超过537℃将发生结构相变.
Abstract
Thermal stability of nanocrystalline intermetallic compound Cu4Al obtained from flow-levitation method is studied by means of DTA(Differential Thermal Analysis) and XRD(X-Ray Diffraction).By DTA experiments on Cu4Al nanopowder,three endothermal peaks at 258 ℃,423 ℃ and 537 ℃ on DTA curve were found.By XRD experiments on original sample and its heat-treating samples,the results show that the endothermal peak at 537 ℃ is related to the structure phase transition from nanostructure Cu4Al to Cu3Al,accompanying growing up of Cu3Al crystalline grain.The test results are compared and it can be seen that Cu4Al nanopowder possess a nice thermal stability below 440 ℃,and it will bring about phase transition above 537 ℃.
参考文献

[1] Yan D.Synthesis and fabrication of nanostructured materials[J].Journal of Inorganic Materials,1995,10(3):1-6.

[2] 韦建军,李朝阳,唐永建,等.自悬浮定向流法制备纳米铜微粒及其结构表征[J].强激光与粒子束,2003,15(4):359-362.
Wei J J,Li C Y,Tang Y J,et al.Preparation and structure of nanocopper particle by flow-levitation method.High Power Laser and Particle Beams,2003,15(4):359-362

[3] 唐永建,韦建军,李朝阳,等.自悬浮定向流纳米金属粉末制备的理论模拟[J].物理学报,2003,52(9):2331-2336.
Tang Y J,Wei J J,Li C Y,et al.Theoretical simulations of preparation of nanometal particles by flow-levitation method.Acta Physica Sinica,2003,52(9):2331-2336

[4] 韦建军,唐永建,李朝阳,等.纳米金属间化合物Cu4Al的制备及其结构表征[J].功能材料与器件学报,2003,9(4):381-385.
Wei J J,Tang Y J,Li C Y,et al.Preparation and characterization of nanocrystalline intermetallic compound Cu4Al by flow-levitation method.Journal of Functional Materials and Devices,2003,9(4):381-385

[5] 秦荣山,鄢红春,何冠虎,等.直接晶化法制备块体纳米材料的探索[J].材料研究学报,1995,9(3):219-222.
Qin R S,Yan H C,He G H,et al.Exploration on the fabrication of bulk nanocrystalline materials by direct-nanocrystallizing method.Chinese Journal of Materials Research,1995,9(3):219-222

[6] Xu B S,Tanaka S I.Formation and bonding of platinum nanoparticles controlled by high energy beam irradiation[J].Nanostructured Materials,2000,20(12):915-918.

[7] 张振忠,宋广生,杨根仓,等.块状金属纳米材料的制备技术进展及展望[J].兵器材料科学与工艺,1999,3(10):46-50.
Zhang Z Z,Shong G S,Yang G C,et al.Development of bulk metal nanometer materials preparation technologies and their estimate.Ordnance Material Science and Engineering,1999,3(10):46-50

[8] Fitzsimmons M R,Eastman J A,Robinson R A,et al.Magnetic order in nanocrystalline Cr and suppression of antiferromagnetism in bcc Cr[J].Phy Rev B,1993,48(11):8245-8253.

[9] Wang H,Sheng M R,Ning Z Y,et al.Deposition of diamond-like carbon films by electrolysis of methanol solution[J].Appl Phys Lett,1996,69(8):1074-1076.

[10] Latuch J,Kokoszhiewicz A.Crystallization temperature and micro hardness of some meltspun amorphous aluminum based alloys in the Al-Tm-Re systems[J].Mater Sci Forum,1998,269-272:755-760.

[11] 田荣璋,王祝堂.铜合金及其加工手册[M].长沙:中南大学出版社,2002.
Tian R Z,Wang Z T.Copper alloy and its machining handbook.Changsha:Central South University Press,2002

[12] Hageue D C,Mayo M J.Effect of crystallization and phase transformation in nanocrystalline TiO2[J].Nanostructured Materials,1993,3(3):61-67.

[13] Kim W T,Gogebakan M.Heat treatment of amorphous Al85Y5Ni10 alloy[J].Mater Sci and Eng,1997,A226-228:178-182.

韦建军, 唐永建, 王朝阳, 吴卫东, 王小琴. 金属间化合物Cu4Al纳米微粉的热稳定性研究[J]. 强激光与粒子束, 2005, 17(12): 1839. WEI Jian-jun, TANG Yong-jian, WANG Chao-yang, WU Wei-dong, WANG Xiao-qin. Thermal stability of nanocrystalline intermetallic compound Cu4Al powder[J]. High Power Laser and Particle Beams, 2005, 17(12): 1839.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!