中国激光, 2016, 43 (12): 1202001, 网络出版: 2016-12-09   

表面处理工艺对铝合金抗激光损伤能力的影响

Effect of Surface Treatment Technology on Laser Damage Resistance of Aluminium Alloy
作者单位
1 中国科学院上海光学精密机械研究所高功率激光物理重点实验室, 上海 201800
2 上海大学机电工程与自动化学院, 上海 200444
3 电子工程学院脉冲功率激光技术国家重点实验室, 安徽 合肥 230037
摘要
研究了表面处理工艺对铝合金表面抗激光损伤能力的影响。结果表明,在相同纳秒激光脉冲辐照下,与机械抛光相比,化学镀镍、阳极氧化黑和硬质阳极氧化处理的表面损伤阈值较低,而钝化和微弧氧化的损伤阈值较高;相同处理工艺但不同参数对应的损伤阈值不同。通过比较不同工艺表面的相关物理参数,对损伤阈值、形貌和规律进行了分析。结果表明,钝化更适用于高功率激光装置中铝合金表面的处理。
Abstract
The effect of surface treatment technology on laser damage resistance of aluminum alloy is studied. Results show that, under the same nanosecond laser irradiation, the laser-induced damage threshold of nickel-plated metal surface, black anode oxidated surface, or hard anode oxidated surface is lower, while that of inactivated or micro arc oxidized surface is higher, if compared with that of mechanically polished surface; surfaces treated by the same treatment process but with different parameters have different damage thresholds. With the comparison among the relevant physical parameters of different technologies, the damage thresholds, morphologies, and patterns are analyzed and the results indicate that the inactivation technology is more suitable for the aluminum alloy surface treatment in high power laser facility.
参考文献

[1] Soileau M J. 40 year retrospective of fundamental mechanisms[C]. SPIE, 2008, 7132: 713201.

[2] Manenkov A A. Fundamental mechanisms of laser-induced damage in optical materials: Understanding after 40-year research[C]. SPIE, 2008, 7132: 713202.

[3] 苗心向, 程晓锋, 袁晓东, 等. 熔石英表面铜颗粒污染激光诱导损伤[J]. 强激光与粒子束, 2010, 22(8): 1740-1744.

    Miao Xinxiang, Cheng Xiaofeng, Yuan Xiaodong, et al. Laser-induced damage of fused silica initiated by Cu contamination particles on surface[J]. High Power Laser and Particle Beams, 2010, 22(8): 1740-1744.

[4] 苗心向, 袁晓东, 王海军, 等. 熔石英表面铜膜污染物诱导损伤实验研究[J]. 强激光与粒子束, 2008, 20(9): 1483-1486.

    Miao Xinxiang, Yuan Xiaodong, Wang Haijun, et al. Experiment of laser induced damage threshold for fused silica initiated at thin film contamination of Cu on surface[J]. High Power Laser and Particle Beams, 2008, 20(9): 1483-1486.

[5] 苗心向, 袁晓东, 王成程, 等. 表面Al膜污染物诱导熔石英表面损伤特性[J]. 强激光与粒子束, 2010, 22(7): 1653-1656.

    Miao Xinxiang, Yuan Xiaodong, Wang Chengcheng, et al. Laser induced damage in fused silica contaminated by Al film[J]. High Power Laser and Particle Beams, 2010, 22(7): 1653-1656.

[6] 王立斌, 马伟新, 季来林, 等. 三倍频激光下金属颗粒对熔石英元件损伤阈值的影响[J]. 中国激光, 2012, 39(5): 0502004.

    Wang Libin, Ma Weixin, Ji Lailin, et al. Influence of metal particles on damage threshold of fused silica at 3ω[J]. Chinese J Lasers, 2012, 39(5): 0502004.

[7] Génin F Y, Michlitsch K, Furr J, et al. Laser-induced damage of fused silica at 355 and 1064 nm initiated at aluminum contamination particles on the surface[C]. SPIE, 1997, 2966: 126-138.

[8] Génin F Y, Kozlowski M R, Brusasco R. Catastrophic failure of contaminated fused silica optics at 355 nm[C]. 2nd Annual International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, Paris, 1997.

[9] Génin F Y, Rubenchick A M, Burnham A K, et al. Thin film contamination effects on laser-induced damage of fused silica surfaces at 355 nm[C]. SPIE, 1999, 3492: 212-218.

[10] Génin F Y, Feit M D, Kozlowski M R, et al. Rear-surface laser damage on 355-nm silica optics owing to Fresnel diffraction on front-surface contamination particles[J]. Applied Optics, 2000, 39(21): 3654-3663.

[11] 常浩, 金星, 陈朝阳. 纳秒激光辐照下铝靶的光学与热物理性质研究[J]. 光学学报, 2013, 33(11): 1114002.

    Chang Hao, Jin Xing, Chen Zhaoyang. Study on optical and thermophysical properties of aluminum under nanosecond laser irradiation[J]. Acta Optica Sinica, 2013, 33(11): 1114002.

[12] 韩丰明, 徐世珍, 宋文亮, 等. 纳秒激光对铝合金和不锈钢的烧蚀特性研究[J]. 中国激光,2016, 43(2): 0203005.

    Han Fengming, Xu Shizhen, Song Wenliang, et al. Study of nanosecond laser ablation on aluminum and stainless steel targets[J]. Chinese J Lasers, 2016, 43(2): 0203005.

[13] 安连生. 应用光学[M]. 北京: 北京理工大学出版社, 2008: 226-227.

    An Liansheng. Applied optics[M]. Beijing: Beijing Institute of Technology Press, 2008: 226-227.

[14] Xie J, Kar A, Rothenflue J A, et al. Temperature-dependent absorptivity and cutting capability of CO2, Nd\:YAG and chemical oxygen-iodine lasers[J]. Journal of Laser Applications, 1997, 9(2): 77-85.

时双, 孙明营, 郝艳飞, 张燕, 庞向阳, 章亚男, 刘志刚. 表面处理工艺对铝合金抗激光损伤能力的影响[J]. 中国激光, 2016, 43(12): 1202001. Shi Shuang, Sun Mingying, Hao Yanfei, Zhang Yan, Pang Xiangyang, Zhang Yanan, Liu Zhigang. Effect of Surface Treatment Technology on Laser Damage Resistance of Aluminium Alloy[J]. Chinese Journal of Lasers, 2016, 43(12): 1202001.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!