[1] 董 玲, 杨洗陈, 张海明, 等. 自由曲面破损零件激光再制造修复路径生成［J］. 中国激光, 2012, 39(7): 0703007.

    Dong Ling, Yang Xichen, Zhang Haiming, et al. Path generation for repairing damaged parts of free-form surfaces in laser remanufacturing［J］. Chinese J Lasers, 2012, 39(7): 0703007.

[2] 刘立峰, 杨洗陈. 基于逆向工程的激光再制造机器人路径规划［J］. 中国激光, 2011, 38(7): 0703008.

    Liu Lifeng, Yang Xichen. Path planning of laser remanufacturing robot based on reverse engineering［J］. Chinese J Lasers, 2011, 38(7): 0703008.

[3] 姜付兵, 石世宏, 石 拓, 等. 基于光内送粉技术的激光加工机器人曲面熔覆试验研究［J］. 中国激光, 2015, 42(8): 0803003.

    Jang Fubing, Shi Shihong, Shi Tuo, et al. Experimental research on curved surface cladding based on robotic technology and inside-laser powder feeding technology［J］. Chinese J Lasers, 2015, 42(8): 0803003.

[4] Calleja A, Tabernero I, Ealo J A, et al. Feed rate calculation algorithm for the homogeneous material deposition of blisk blades by 5-axis laser cladding［J］. The International Journal of Advanced Manufacturing Technology, 2014, 74(9): 1219-1228.

[5] 朱刚贤, 石世宏, 傅戈雁, 等. 基于激光加工机器人的光内送粉变基面熔覆研究［J］. 中国激光, 2015, 42(3): 0303010.

    Zhu Gangxian, Shi Shihong, Fu Geyan, et al. Research on variable reference plane cladding based on laser processing robot with inside-laser powder feeding［J］. Chinese J Lasers, 2015, 42(3): 0303010.

[6] 朱刚贤, 张安峰, 李涤尘. 激光熔覆工艺参数对熔覆层表面平整度的影响［J］. 中国激光, 2010, 37(1): 296-301.

    Zhu Gangxian, Zhang Anfeng, Li Dichen. Effect of process parameters on surface smoothness in laser cladding［J］. Chinese J Lasers, 2010, 37(1): 296-301.

[7] 李养良, 白小波, 王 利, 等. 激光熔覆工艺参数对熔覆层组织和性能的影响［J］. 热加工工艺, 2009, 38(12): 101-103.

    Li Yangliang, Bai Xiaobo, Wang Li, et al. Effect of laser cladding processing parameters on microstructure and properties of cladding layer［J］. Material & Heat Treatment, 2009, 38(12): 101-103.

[8] 刘喜明. 同轴送粉激光熔覆过程中粉光匹配影响因素及控制研究［J］. 长春工业大学学报, 2012, 33(5): 513-520.

    Liu Ximing. Powder-laser matching in the coaxial powder feeding and laser cladding process［J］. Journal of Changchun University of Technology, 2012, 33(5): 513-520.

[9] 柯映林, 王 青. 反求工程中的点云切片算法研究［J］. 计算机辅助设计与图形学学报, 2005, 17(8): 1798-1802.

    Ke Yinglin, Wang Qing. Research on point cloud slicing technique in reverse engineering［J］. Journal of Computer-Aided Design & Computer Graphics, 2005, 17(8): 1798-1802.

[10] Kiswanto G, Lauwers B, Kruth J. Gouging elimination through tool lifting in tool path 104 generation for five-axis milling based on faceted models［J］. The International Journal of Advanced Manufacturing Technology, 2007, 32(3): 293-309.

[11] 徐庆鸿, 郭 伟, 田锡唐. 激光扫描速度对激光熔覆宏观质量的影响规律［J］. 航天工艺, 1997(4): 1-4.

    Xu Qinghong, Guo Wei, Tian Xitang. Effect of laser scanning velocity on macroscopic quality of laser cladding［J］. Aerospace Technology, 1997(4): 1-4.

[12] 丁 汉, 朱利民. 复杂曲面数字化制造的几何理论和方法［M］. 北京: 科学出版社, 2011: 41-45.

    Ding Han, Zhu Liming. Digital manufacturing complex surface geometry theories and methods［M］. Beijing: Science Press, 2011: 41-45.

[13] Jung H B, Kim K. A new parameterisation method for NURBS surface interpolation［J］. International Journal of Advanced Manufacturing Technology, 2000, 16(11): 784-790.

[14] Brujic D, Ristic M, Ainsworth I. Measurement-based modification of NURBS surfaces［J］. Computer-Aided Design, 2002, 34(3): 173-183.

[15] 缪东晶, 王国磊, 吴 聊, 等. 自由曲面均匀喷涂的机器人轨迹规划方法［J］. 清华大学学报, 2013, 53(10): 1418-1423.

    Miao Dongjing, Wang Guolei, Wu Liao, et al. Trajectory planning for freeform surface uniform spraying［J］. Journal of Tsinghua University, 2013, 53(10): 1418-1423.

[16] 陈 影， 孙文磊, 黄 勇, 等. 曲面零件的激光熔覆路径规划［J］. 激光与光电子学进展, 2016, 53(6): 061405.

    Chen Ying, Sun Wenlei, Huang Yong, et al. Path planning of laser cladding for curved surface parts［J］. Laser & Optoelectronics Progress, 2016, 53(6): 061405.