激光熔覆曲面零件再制造的机器人路径规划
[1] 董 玲, 杨洗陈, 张海明, 等. 自由曲面破损零件激光再制造修复路径生成[J]. 中国激光, 2012, 39(7): 0703007.
[2] 刘立峰, 杨洗陈. 基于逆向工程的激光再制造机器人路径规划[J]. 中国激光, 2011, 38(7): 0703008.
[3] 姜付兵, 石世宏, 石 拓, 等. 基于光内送粉技术的激光加工机器人曲面熔覆试验研究[J]. 中国激光, 2015, 42(8): 0803003.
[4] Calleja A, Tabernero I, Ealo J A, et al. Feed rate calculation algorithm for the homogeneous material deposition of blisk blades by 5-axis laser cladding[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(9): 1219-1228.
[5] 朱刚贤, 石世宏, 傅戈雁, 等. 基于激光加工机器人的光内送粉变基面熔覆研究[J]. 中国激光, 2015, 42(3): 0303010.
[6] 朱刚贤, 张安峰, 李涤尘. 激光熔覆工艺参数对熔覆层表面平整度的影响[J]. 中国激光, 2010, 37(1): 296-301.
[7] 李养良, 白小波, 王 利, 等. 激光熔覆工艺参数对熔覆层组织和性能的影响[J]. 热加工工艺, 2009, 38(12): 101-103.
Li Yangliang, Bai Xiaobo, Wang Li, et al. Effect of laser cladding processing parameters on microstructure and properties of cladding layer[J]. Material & Heat Treatment, 2009, 38(12): 101-103.
[8] 刘喜明. 同轴送粉激光熔覆过程中粉光匹配影响因素及控制研究[J]. 长春工业大学学报, 2012, 33(5): 513-520.
Liu Ximing. Powder-laser matching in the coaxial powder feeding and laser cladding process[J]. Journal of Changchun University of Technology, 2012, 33(5): 513-520.
[9] 柯映林, 王 青. 反求工程中的点云切片算法研究[J]. 计算机辅助设计与图形学学报, 2005, 17(8): 1798-1802.
Ke Yinglin, Wang Qing. Research on point cloud slicing technique in reverse engineering[J]. Journal of Computer-Aided Design & Computer Graphics, 2005, 17(8): 1798-1802.
[10] Kiswanto G, Lauwers B, Kruth J. Gouging elimination through tool lifting in tool path 104 generation for five-axis milling based on faceted models[J]. The International Journal of Advanced Manufacturing Technology, 2007, 32(3): 293-309.
[11] 徐庆鸿, 郭 伟, 田锡唐. 激光扫描速度对激光熔覆宏观质量的影响规律[J]. 航天工艺, 1997(4): 1-4.
Xu Qinghong, Guo Wei, Tian Xitang. Effect of laser scanning velocity on macroscopic quality of laser cladding[J]. Aerospace Technology, 1997(4): 1-4.
[12] 丁 汉, 朱利民. 复杂曲面数字化制造的几何理论和方法[M]. 北京: 科学出版社, 2011: 41-45.
Ding Han, Zhu Liming. Digital manufacturing complex surface geometry theories and methods[M]. Beijing: Science Press, 2011: 41-45.
[13] Jung H B, Kim K. A new parameterisation method for NURBS surface interpolation[J]. International Journal of Advanced Manufacturing Technology, 2000, 16(11): 784-790.
[14] Brujic D, Ristic M, Ainsworth I. Measurement-based modification of NURBS surfaces[J]. Computer-Aided Design, 2002, 34(3): 173-183.
[15] 缪东晶, 王国磊, 吴 聊, 等. 自由曲面均匀喷涂的机器人轨迹规划方法[J]. 清华大学学报, 2013, 53(10): 1418-1423.
Miao Dongjing, Wang Guolei, Wu Liao, et al. Trajectory planning for freeform surface uniform spraying[J]. Journal of Tsinghua University, 2013, 53(10): 1418-1423.
[16] 陈 影, 孙文磊, 黄 勇, 等. 曲面零件的激光熔覆路径规划[J]. 激光与光电子学进展, 2016, 53(6): 061405.
陈影, 孙文磊, 黄勇, 黄海博, 王鑫龙. 激光熔覆曲面零件再制造的机器人路径规划[J]. 中国激光, 2017, 44(5): 0502001. Chen Ying, Sun Wenlei, Huang Yong, Huang Haibo, Wang Xinlong. Robot Path Planning of Laser Cladding and Remanufacturing of Curved Surface Parts[J]. Chinese Journal of Lasers, 2017, 44(5): 0502001.