X波段相对论速调管放大器同轴双间隙
[1] Benford J, Swegle J A, Schamiloglu E. 高功率微波[M]. 北京:国防工业出版社, 2009:293-296.(Benford J, Swegle J A, Schamiloglu E.High power microwave. BeiJing: National Defense Industry Press, 2009:293-296)
[2] Barker R J, Schamiloglu E. High-power microwave sources and technologies[M]. New York: IEEE Press, 2001.
[3] Lee T G, Konrad G T. The design and performance of a 150 MW klystron at S band [J].IEEE Trans on Plasma Sci,1985,13(6):545-552.
[4] Lee T G. Multiple extraction cavities for high-power klystrons[J].IEEE Trans on Electron Devices,1993,40(7):1329-1334.
[5] 丁耀根. 大功率速调管的理论与计算模拟[M]. 北京: 国防工业出版社,2008: 325-346.(Ding Yaogen. Theory and computer simulation of high power klystron.Beijing: National Defense Industry Press, 2008:325-346)
[6] 范植开.渡越管振荡器的理论研究与原理性实验[D].北京:中国工程物理研究院研究生部, 1999: 19-24.(Fan Zhikai. Theory analysis and experiment of the transit-time tube oscillator. Beijing: Graduate School of China Academy of Engineering Physics, 1999: 19-24)
[7] 谢家麟,赵永翔. 速调管群聚理论[M]. 北京:科学出版社,1966:24-43.(Xie Jialin,Zhao Yongxiang. Bunching theory for klystron. Beijing: Science Press,1996:24-43)
[9] 黄华,孟凡宝,范植开,等. 相对论速调管三轴提取腔的分析与设计[J]. 物理学报,2006,55(10):5344-5348.(Huang Hua, Meng Fanbao, Fan Zhikai, et al. Analysis and design of triaxial output cavity in a relativistic klystron amplifier.Acta Physica Sinica,2006,55(10):5344-5348)
[10] 丁耀根. 大功率速调管的设计制造和应用[M]. 北京: 国防工业出版社,2010: 21-26.(Ding Yaogen. Design, manufacture and application of high power klystron. Beijing: National Defense Industry Press, 2010:21-26)
刘振帮, 黄华, 金晓, 陈怀璧. X波段相对论速调管放大器同轴双间隙[J]. 强激光与粒子束, 2011, 23(8): 2162. Liu Zhenbang, Huang Hua, Jin Xiao, Chen Huaibi. Characteristic of X-band coaxial double-gap output cavity of klystron amplifier[J]. High Power Laser and Particle Beams, 2011, 23(8): 2162.