用于牙科植入体的激光快速成形纯钛性能研究
[1] . F. Susan, J. D. Puskar, J. A. Brooks et al.. Quantitative characterization of porosity in stainless steel LENS powders and deposits[J]. Materials Characterization, 2006, 57(1): 36-43.
[2] . Hollander, Matthias von Walter, Tobias Wirtz et al.. Structurre, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming[J]. Biomaterials, 2006, 27(7): 955-963.
[3] . Abbott, Frank G. Arcella. Laser forming titanium components[J]. Adv. Mater. Process, 1998, 5(1): 29-30.
[4] . Dutta Majumdar, A. Pinkerton, Z. Liu et al.. Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless stell[J]. Applied Surface Science, 2005, 247: 373-377.
[5] . . The mechanics properties of the Rene95 samples produced by the laser rapid forming process[J]. Rare Metal Material and Engineering, 2003, 32(4): 276-279.
[7] Wang Xiaobo. Experimental study on fabrication of titanium crown, fixed bridge and base of complete denture with laser solid forming technology [D]. Xi’an: Dissertation for the Degree of Ph.D. The Forth Military Medical University, 2005
王晓波. 冠、桥及全口钛基托的激光立体成形制备研究[D]. 西安:第四军医大学博士论文, 2005
[8] Chen Zhiqing. Science of Dental Materials [M]. The 2nd edition. Beijing: Peoples Medical Publishing House, 2001. 19~69
陈治清. 口腔材料学[M]. 第2版. 北京:人民卫生出版社, 2001. 19~69
[9] . Gorham, James M. Courtney. Screening of in vitro cytoxicity by the adhesive test[J]. Biomaterials, 1990, 11(2): 133-137.
[10] . W. Tillitson, R. G. Craig, F. A. Peyton. Friction and wear of restorative dental materials[J]. J. Dent Res., 1971, 50(1): 149-154.
[11] Ma Junping. Research on the wear effects of some dental materials in vitro [D]. Xi’an: Dissertation for the Degree of Master. The Forth Military Medical University, 2001
马军萍. 非贵金属、纯钛及烤瓷材料磨耗性能的实验研究[D]. 西安:第四军医大学硕士论文, 2001
朱娟芳, 高勃, 王忠义, 张风英, 陈静, 杨海欧. 用于牙科植入体的激光快速成形纯钛性能研究[J]. 中国激光, 2007, 34(4): 588. 朱娟芳, 高勃, 王忠义, 张风英, 陈静, 杨海欧. Properties of Pure Titanium for Dental Implants Fabricated by Rapid Laser Forming[J]. Chinese Journal of Lasers, 2007, 34(4): 588.