温度变化对1.23 m望远镜光机系统的影响

杨飞; 明名; 王富国; 张丽敏

doi:doi:10.3788/gzxb20124101.0026

光子学报, 2012, 41 (1): 26, 网络出版: 2012-02-13

温度变化对1.23 m望远镜光机系统的影响

Influences of Thermal Diversification to Opto-mechanical System of 1.23 m Telescope

论文大纲

杨飞 ^*明名王富国张丽敏

作者单位

中国科学院长春光学精密机械与物理研究所，长春 130033

光机系统温度影响大口径望远镜离焦误差 Opto-mechanical system Influence of the thermal diversification Large aperture of telescope Defocus error

摘要

为了实现1.23 m望远镜在环境温度从－35℃～+55 ℃变化范围内，光机系统的成像质量的指标要求，本文从原理上分析了温度变化对光机系统中光学元件面形准确度及相对位置关系的影响，推导出了主次镜间光学间隔变化与像面离焦量的比例关系.通过对1.23 m望远镜光学结构的像质分析，结合光机结构设计，搭建了适合环境温度变化的光机系统，从方案设计上满足了望远镜系统的成像要求.通过实际的成像实验，验证了温度变化导致的主次镜光学间隔变化对望远镜系统成像带来的离焦的影响，并给出了具体的温度补偿措施，即采取次镜调焦的方式，可满足具体观测实验的要求.同时，为今后1.23 m望远镜以及类似的大口径望远镜系统的实验和技术改造提出了切实可行的意见.

Abstract

Influences of the thermal diversification to the accuracy of optical element and relatively position of the opto-mechanical system are analyzed. The scale ratio of the optical distance diversification and the defocus error of optical system is derived. Through integrated opto-mechanical design and analysis of image quality of the 1.23 m aperture telescope, an opto-mechanical system (fitting the thermal diversification of －35 ℃～+55 ℃) is built that meets the requirements of imaging of the telescope. It is also validated that the main influence of the thermal diversification to the telescope is defocus error, and some practical compensation methods such as focus mechanism on secondary mirror to satisfy the requirements of observation of the telescope are presented. Meanwhile, some feasible opinions for the observational experiments and upgrading of 1.23 m aperture telescope or larger aperture telescope analogously are proposed.

参考文献

[1] MIYAWAKI K, ITOH N, SUGIYAMA R, et al. Mechanical structure for the SUBARU telescope［C］. SPIE, 1994, 2199: 754-761.

[2] BELY P Y. The design and constructon of large optical telescope［M］. New York: Springer-Verlag, 2003.

[3] 明名, 王建立, 张景旭, 等. 大口径望远镜光学系统的误差分配与分析［J］. 光学精密工程, 2009, 17(1): 104-108.

MING Ming, WANG Jian-li, ZHANG Jing-xu, et al. Error budget and analysis for optical system in large telescope［J］. Optics and Precision Engineering, 2009, 17(1): 104-108.

[4] SCHIPANI P, FERRAGINA L, MARTY L, et al. Parallel robots in a ground-based telescope active optics system: theory and experiments［C］. SPIE, 2007, 6715: 671503-1-671503-9.

[5] CASALTA J M, ARINO J, CANCHADO M, et al. The performances of the GTC secondary mirror drive unit［C］. SPIE, 2004, 5495: 507-517.

[6] PERNECHELE C, BORTOLETTO F, REIF K. Position-control for active secondary mirror a two-mirror telescope［C］. SPIE, 1997, 3112: 172-180.

[7] ZAGO L, GENEQUAND P, MOERSCHELL J. Extremely compact secondary mirror unit for the SOFIA telescope capable of 6-degree-of-freedom aligment plus chopping［C］. SPIE, 1997, 3352: 666-674.

[8] RICCARDI A, SALINARI P, BRUSA G, et al. Adaptive secondary mirrors for the large binocular telescope［C］. SPIE, 2003, 4839: 159-168.

[9] 孙敬伟, 陈涛, 王建立, 等. 主次镜系统的计算机辅助装调［J］. 光学精密工程, 2010, 18(10): 2156-2163.

SUN Jing-wei, CHEN Tao, WANG Jian-li, et al. Computer-aided alignment for primary and secondary mirrors［J］. Optics and Precision Engineering, 2010, 18(10): 2156-2163.

[10] 沈宏海, 王国华, 丁金伟, 等. 主动补偿无热化技术在机载红外光学系统中的应用［J］.光学精密工程, 2010, 18(3): 593-601.

SHEN Hong-hai, WANG Guo-hua, DING Jin-wei, et al. Application of active-athermal compensation to airborne IR optical systems［J］. Optics and Precision Engineering, 2010, 18(3): 593-601.

杨飞, 明名, 王富国, 张丽敏. 温度变化对1.23 m望远镜光机系统的影响[J]. 光子学报, 2012, 41(1): 26. YANG Fei, MING Ming, WANG Fu-guo, ZHANG Li-min. Influences of Thermal Diversification to Opto-mechanical System of 1.23 m Telescope[J]. ACTA PHOTONICA SINICA, 2012, 41(1): 26.

温度变化对1.23 m望远镜光机系统的影响

关于本站 Cookie 的使用提示

全站搜索

温度变化对1.23 m望远镜光机系统的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索