[1] 柳光乾, 卢汝为. 云台红外太阳望远镜中光电导行系统的像场旋转［J］. 云南天文台台刊, 2003, (4): 28～33

    Liu Guangqian, Lu Ruwei. The image field rotation of the auto-guide unit of the solar telescope in yunnan observatory［J］. Publications of Yunnan Observatory, 2003, (4): 28～33

[2] 柳光乾, 付玉, 程向明. 1米太阳望远镜光谱仪像旋转及消旋控制［J］. 天文研究与技术, 2012, 9(1): 86～92

    Liu Gangqian, Fu Yu, Cheng Xiangming. Image rotation and disrotatory control for the spectrum apparatus of one meter solar telescope［J］. Astronomical Research & Technology, 2012, 9(1): 86～92

[3] 周超, 杨洪波, 吴小霞 等. 地基大口径望远镜结构的性能分析［J］. 光学 精密工程, 2011, 19(1): 138～145

    Zhou Chao, Yang Hongbo, Wu Xiaoxia et al.. Structural analysis of ground-based large telescope［J］. Optics and Precision Engineering, 2011, 19(1): 138～145

[4] 程向明, 陈林飞, 许骏 等. YNST光电导行镜机械设计［J］. 天文研究与技术, 2011, 8(2): 196～204

    Cheng Xiangming, Chen Linfei, Xu Jun et al.. Mechanical design of the auto-guiding telescope of the YNST［J］. Astronomical Research & Technology, 2011, 8(2): 196～204

[5] G. Hussain, M. Ikram. Optical measurements of angle and axis of rotation［J］. Opt. Lett., 2008, 33(6): 2419～2421

[6] G. Moretto, J. R. Kuhn. Optical performance of the 6.5-m off-axis new planetary telescope［J］. Appl. Opt., 2000, 39(16): 2782～2789

[7] 何玉梅, 汤国茂. 径向哈特曼检测系统的光轴对准［J］. 中国激光, 2009, 36(S2): 243～247

    He Yumei, Tang Guomao. Alignment for radial Hartmann test system［J］. Chinese J. Lasers, 2009, 36(S2): 243～247

[8] 张雏, 周冰, 沈学举 等. 精确校正激光测距仪三光轴平行的理论计算方法研究［J］. 光学 精密工程, 2002, 10(6): 650～654

    Zhang Chu, Zhou Bing, Shen Xueju et al.. Study of the calculation method for accurately adjusting laser-range-finder′s three-optic-axes to parallel to each other［J］. Optics and Precision Engineering, 2002, 10(6): 650～654

[9] 凌军, 刘秉琦, 赵熙林. 几种光轴平行性测试方法的比较与探讨［J］. 应用光学, 2003, 24(1): 43～45

    Ling Jun, Liu Bingqi, Zhao Xilin. The comparison and discussion of several testing methods about optical-axis parallelism［J］. J. Appl. Opt., 2003, 24(1): 43～45

[10] 贺和好, 叶露, 周兴义 等. 平行度测试仪原理及其测量精度分析［J］. 光电工程, 2007, 34(5): 52～56

    He Hehao, Ye Lu, Zhou Xingyi et al.. Theory and precision analysis of testing apparatus of parallel depth［J］. Opto-Electronic Engineering, 2007, 34(5): 52～56

[11] 高明, 冯小利, 赵文才. 外场多光轴平行性测试的光学系统设计［J］. 光学技术, 2011, 37(1): 114～119

    Gao Ming, Feng Xiaoli, Zhao Wencai. Design of optical system for measuring the optical axis parallelism of multi axial system in field［J］. Optical Technique, 2011, 37(1): 114～119

[12] 黄卫佳. 双筒望远镜光轴平行度测量方法的讨论［J］. 光学仪器, 2000, 22(1): 7～10

    Huang Weijia. A discussion about measurement method of parallelism of optical axis of binocular telescope［J］. Optical Instruments, 2000, 22(1): 7～10

[13] Hai Wang, Yuanxing Zhao. Pointing model for LAMOST experiment set［C］. SPIE, 2006, 6267: 62673A

[14] R. L. Meeks. Improving Telescope Mechanical Errors Estimates Using Pointing Data［D］. Colorado: Colorado State University, 2003

[15] R. L. Meeks. Sources of uncertainty in telescope pointing models［C］. SPIE, 2004, 5497: 140～148

[16] 冒蔚, 季凯帆, 李彬华 等. CCD天体测量学［M］. 昆明: 云南科技出版社, 2003

    Mao Wei, Ji Kaifan, Li Binhua et al.. Celestial Measuring Based on CCD［M］. Kunming: Yunnan Technology Press, 2003

[17] 丁晓华, 李由, 于起峰 等. CCD噪声标定及其在边缘定位中的应用［J］. 光学学报, 2008, 28(1): 99～104

    Ding Xiaohua, Liu You, Yu Qifeng et al.. CCD noise calibration and its application in edge location［J］. Acta Optica Sinica, 2008, 28(1): 99～104