红外, 2017, 38 (12): 13, 网络出版: 2018-01-09
红外焦平面探测器快速启动的影响因素分析
Analysis of Influence Factors of Fast Cool-down of IRFPA Detectors
摘要
随着红外焦平面成像制导的应用越来越广泛,人们对探测器组件的体积、快速启动能力等方面的要求也越来越高。针对这个问题,基于探测器的芯片、杜瓦结构和快速制冷器的设计,对探测器快速启动的影响因素进行了分析,得出了对提高红外焦平面探测器快速启动具有帮助意义的结论。
Abstract
With the wide application of infrared focal plane arrays (IRFPA), the requirements of detector assemblies in volume and fast cool-down etc are becoming higher and higher. To solve this problem, the influence factors on the fast cool-down of IRFPA detectors are analyzed on the basis of the design of detector chip, Dewar structure and fast cool-down cooler. The conclusions which are helpful to the improvement of fast cool-down of IRFPA detectors are drawn.
参考文献
[1] 孙维国, 黄永安, 李勇平, 等. 空空导弹光电探测器设 计[M]. 北京: 国防工业出版社, 2006.
[2] 张莉, 甘玉梅, 杨桂兰. J-T制冷器对红外探测器组件噪声的影 响[J]. 激光与红外, 2000, 30(5): 302-303.
[3] 牟宏山, 陈静, 乔育花. 快速制冷型红外焦平面成像制导系统设 计[J]. 红外与毫米波学报, 2016, 35(3): 310-316.
[4] 刘家琛. 微型红外探测器快速冷却过程分析与结构优 化[D]. 上海: 上海交通大学, 2015.
李进武, 刘建伟, 李娟. 红外焦平面探测器快速启动的影响因素分析[J]. 红外, 2017, 38(12): 13. LI Jin-wu, LIU Jian-wei, LI Juan. Analysis of Influence Factors of Fast Cool-down of IRFPA Detectors[J]. INFRARED, 2017, 38(12): 13.