微机电系统光学组件的系统级建模

李晓莹; 李慧敏; 常洪龙; 何洋; 焦文龙

doi:doi:10.3788/ope.20122005.1069

光学精密工程, 2012, 20 (5): 1069, 网络出版: 2012-08-08

微机电系统光学组件的系统级建模

System-level modeling for MEMS optical components

论文大纲

李晓莹 ^*李慧敏常洪龙何洋焦文龙

作者单位

西北工业大学陕西省微／纳米系统重点实验室，陕西西安710072

微机电系统(MEMS) 光学组件建模 Verilog-A硬件描述语言 Micro-electro-mechanical Systems(MEMS) optical component modeling Verilog-A

摘要

为提高微机电系统(MEMS)中光学系统整体仿真的准确性和效率,解决光学组件系统级建模存在的问题，提出了一种光学组件系统级建模方法，该方法可同时支持与MEMS系统级机械组件和电路组件共同仿真。首先，介绍了多端口组件网络方法、高斯光束特点和空间坐标系变换理论。接着，以微平面镜为例，介绍了光学组件系统级建模方法的流程。最后，采用Verilog-A硬件描述语言建立了包含多个典型光学组件的系统级光学库。使用该库的光学组件在MEMS集成设计工具MEMS Garden中搭建微扫描系统进行了仿真与测试。与商业软件CoventorWare的分析结果相比，提出的建模方法解决了扫描盲区问题，且非差分电压分析的误差小于3%。结果显示，本文提出的建模方法精确有效，对MEMS的系统级设计有参考价值。

Abstract

To improve the accuracy and efficiency of the simulation for the optical system in a Micro-electro-mechanical System (MEMS) and to overcome the difficulties in the system-level modeling of MEMS optical components, a system-level modeling method was proposed to support the co-simulation for MEMS system-level mechanical components and electrical components. First, the modeling methodology of Multi-Port-Element Network (MuPEN), the characteristics of Gaussian beam and the theory of space coordinate transformation were introduced. Then, the modeling process of a micro-mirror was given to explain the modeling method of all optical components. Finally, using the hardware description language of Verilog-A, an optical library including some typical components was established. The non-differential voltage simulation results of the system-level scanning system were compared with those of CoventorWare and results show that the scanning system in former environment can eliminate the blind area, and the maximum error is within 3%. It indicates that the proposed modeling method for optical components could work effectively and accurately, and the study is significant value to the MEMS system-level design.

参考文献

[1] FEDDER G K. A vision of structured CAD for MEMS[C]. Proceedings of the Fifth ACM/SIGDA Physical Design Workshop, Reston, 1996: 76-80.

[2] MUKHERJEE T, FEDDER G K. Structured design of microelectro-mechanical systems[C]. Proceedings of the 34th Annual Design Automation Conference(DAC97),New York,USA, 1997.

[3] 苑伟政，常洪龙.泛结构化微机电系统集成设计方法[M]. 西安：西北工业大学出版社，2010.

YUAN W ZH,CHANG H L. The Structured Microelectromechanical System Integration Design Method[M].Xi’an: Northwestem Polytechnical University Press,2010. (in Chinese)

[4] Coventorware, SanMateo, CA. [EB/OL]. Available: http: //www.coventor.com

[5] KUZWEG T P, MARTINEZ J A. New models for optical MEMS[J]. Photonics East, Boston, MA, 2001: 1-12.

[6] 霍鹏飞. 微机电系统的多端口组件网络方法系统级建模研究[D]. 西安：西北工业大学，2004.

HUO P F.A methodology of multi-port-element network for MEMS system-level modeling[D].Xi’an: Northwestem Polytechnical University, 2004. (in Chinese)

[7] 叶玉堂，饶建珍，肖峻.光学教程[M].北京：清华大学出版社，2005.

YE Y T, RAO J ZH, XIAO J. Optical Tutorial[M].Beijing: Tsinghua University Press,2005. (in Chinese)

[8] KUNDET K, ZINKE O. The Designers Guide to Verilog-AMS[M]. Kluwer Academic Publishers, 2004.

[9] QI J. Modeling and simulation for design of suspended MEMS [D]. Carnegie Mellon University. 2003.

[10] 苑伟政，牛昊彬，常洪龙，等. MEMS器件与电路共同仿真原型系统[J].光学精密工程，2010,18(10)：2206-2211.

YUAN W ZH,NIU H B,CHANG H L, et al.. Co-simulation of MEMS and circuits in Zeni-VLG［J］. Opt. Precision Eng., 2010,18(10)：2206-2211. (in Chinese)

[11] TOSHIYOSHI H, TANAMETHA W P,CHENG-T C.Linearization of electrostatically actuated surface micromachined 2-D optical scanner [J]. Journal of Microelectromechanical Systems, 2001,10(2): 205-214.

李晓莹, 李慧敏, 常洪龙, 何洋, 焦文龙. 微机电系统光学组件的系统级建模[J]. 光学精密工程, 2012, 20(5): 1069. LI Xiao-ying, LI Hui-min, CHANG Hong-long, HE Yang, JIAO Wen-long. System-level modeling for MEMS optical components[J]. Optics and Precision Engineering, 2012, 20(5): 1069.

微机电系统光学组件的系统级建模

关于本站 Cookie 的使用提示

全站搜索

微机电系统光学组件的系统级建模

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索