[1] 孙芳方, 何亚飞, 钱锐, 等. 光电经纬仪跟踪架谐振频率分析［J］. 现代制造工程, 2010,09: 102-105.

    SUN Fang-fang, HE Ya-fei, QIAN Yue, et al. Investigation on the means improving the resonance frequency of electro-optical theodolite［J］ . Modern Manufacturing Engineering, 2010,09: 102-105.

[2] SAN Xiao-gang, QIAO Yan-feng, YU Shuai-bei, et al. Optimization design and simulation analysis for the key components of 1m aperture photoelectric theodolite［C］. 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes,2014: 92800K.

[3] XIONG Chun-bao, LIU Zhen-hua, PAN Yan-ling. High-accuracy coordinates measurement by electronic theodolites［C］. Advanced Laser Technologies, 2005: 63442W.

[4] MARCOS R, GARCIA T, TEODORA V, et al. Mechanical design and analysis, control architecture, dynamic model and performance simulation［C］. SPIE, 2008, 7012: 70120X.

[5] 许峰, 郭勇, 余炜,等. 光电经纬仪机电耦合动力学模型仿真及分析［J］. 光子学报, 2008, 37(10): 2076-2079.

    XU Feng, GUO Yong, YU Wei, et al. Simulation and analysis on electromechanical dynamics of optical-electric theodolite［J］. Acta Photonica Sinica, 2008, 37(10): 2076-2079.

[6] 王闻宇.伺服系统柔性连接负载控制方法研究［D］.武汉:华中科技大学, 2012:1-118.

[7] 蔡立华, 高慧斌, 张淑梅等.应用复杂陷波器精确消除经纬仪机械谐振方法的研究［J］.测控技术, 2009, 28(2):58-61.

    CAI Li-hua, GAO Hui-bin, ZHANG Shu-mei, et al. Research on method of eliminating accurately mechanical resonance frequency of the theodolite by complex falling filter［J］. Measurement & Control Technology, 2009, 28(2):58-61.

[8] WANG S, TAI K. Topology optimization of piezoelectric sensors/actuators for torsional vibration control of composite plates ［J］. Smart Materials and Structures, 2006,15:253-269.

[9] XU B, JIANG J. Integrated optimization of structure and control for piezoelectric intelligent trusses with uncertain placement of actuators and sensors［J］.Computational Mechanics, 2004,33(5): 406-412.

[10] 朱灯林, 王安麟, 邵萌.基于性能配置的机械手结构/控制并行设计［J］.机械科学与技术,2005,24(6):639-641.

    ZHU Deng-lin,WANG An-lin,SHAO Meng, et al. Concurrent design of structure and control of arm-manipulator based on performance requirements［J］. Mechanical science and technology, 2005,24(6):639-641.

[11] 王海红.雷达伺服系统的结构/控制一体化设计［D］.西安:西安电子科技大学, 2008:1-62.

[12] 石斌.高速高精度机电系统的结构/控制一体化设计模型的研究［D］.上海: 上海交通大学,2007:1-67.

[13] 张建民. 机电一体化系统设计［M］. 北京: 北京理工大学出版社, 2013.

[14] 廖洪波, 范世珣, 黑墨,等.光电稳定平台伺服系统动力学建模与参数辨识［J］.光学精密工程, 2015, 23(2): 477-484.

    LIAO Hong-bo, FAN Shi-xun, HEI Mo, et al. Modeling and parameter identification for electro-optical stabilized platform servo system［J］. Optics and Precision Engineering, 2015, 23(2): 477-484.

[15] 季晶晶.大惯量负载伺服系统动力学建模与控制研究［D］. 南京:南京理工大学, 2014:1-112.

[16] 董岩. 基于神经网络的机载三轴稳定平台控制系统算法应用研究［D］. 长春:中科院长春光机所,2011:1-110.