强激光与粒子束, 2004, 16 (5): 633, 网络出版: 2006-05-15
同轴安装避免引燃管自闪
Avoiding ignitron prefire with a coaxial structure
高功率激光 能源系统 引燃管 自闪 同轴结构 High power laser Power conditioning system Iignitron Prefire Coaxial structure
摘要
分析了高功率固体激光能源系统新型放电回路中引燃管的自闪原因,提出引燃管同轴安装结构,利用同轴结构的负反馈作用,把放电电流控制在引燃管中央;同时利用同轴结构的电场屏蔽作用,进一步减少水银在管壁的凝结.在4×2×3片状放大器2000发次的运往中,引燃管没有发生自闪现象.
Abstract
This paper analyzes the mechanism that ignitron prefires when it is used in new discharge circuit of power conditioning system for high power laser. The performance of ignitron is improved with a coaxial structure. The coaxial structure not only controls discharge current flowing through the center of ignitron but also shields the electric field produced by the ignitron. The ignitrons have successfully run over 2 000 shots in 4×2×3 amplifier system without prefire.
力一峥, 郭良福, 蒋学军, 郑万国, 陈德怀, 林东辉, 栾永平, 李东梅, 於海武, 周丕璋, 彭翰生. 同轴安装避免引燃管自闪[J]. 强激光与粒子束, 2004, 16(5): 633. LI Yi-zheng, GUO Liang-fu, JIANG Xue-jun, ZHENG Wan-guo, CHEN De-huai, LIN Dong-hui, LUAN Yong-ping, LI Dong-mei, YU Hai-wu, ZHOU Pi-zhang, PENG Han-sheng. Avoiding ignitron prefire with a coaxial structure[J]. High Power Laser and Particle Beams, 2004, 16(5): 633.