激光与光电子学进展, 2017, 54 (8): 082201, 网络出版: 2017-08-02
基于塔尔博特自成像光刻机的照明系统设计与分析 下载: 1202次
Design and Analysis of Illumination System of Talbot Self-Imaging Lithographic Equipment
光学设计 光刻 照明系统 容差分析 塔尔博特自成像 optical design lithography illumination system tolerance analysis Talbot self-imaging
摘要
针对塔尔博特自成像光刻机对照明系统的特定需求, 基于成像照明光学设计理论,引入非成像光学理论思想, 建立照明系统的初始结构。利用光学设计软件Zemax对照明系统光学初始结构进行优化, 并在Lighttools中对该照明系统进行建模和大规模分布式光线追迹。追迹结果表明, 在照明面积60 mm×60 mm范围内, 照明不均匀度约为1.83%, 照明功率密度不小于1.15 mW·mm-2。对照明面在光轴方向上的位移容差进行分析, 结果表明该照明系统可以满足塔尔博特自成像光刻的需求。
Abstract
Based on optical design theory of imaging illumination and non-imaging optical theory, an initial optical structure of illumination system is established according to the special requirements of Talbot self-imaging lithographic equipment. The optical design software Zemax is applied to optimize the initial structure. The software Lighttools is used to set up models and perform large-scale ray tracing. The simulation result shows that the nonuniformity of illumination approaches 1.83% in the illumination area of 60 mm×60 mm. Meanwhile, the power density is no less than 1.15 mW·mm-2. The tolerance analysis is carried out on the illumination system. The results show that the illumination system satisfies the demand of Talbot self-imaging lithography.
佟军民, 刘俊伯, 胡松. 基于塔尔博特自成像光刻机的照明系统设计与分析[J]. 激光与光电子学进展, 2017, 54(8): 082201. Tong Junmin, Liu Junbo, Hu Song. Design and Analysis of Illumination System of Talbot Self-Imaging Lithographic Equipment[J]. Laser & Optoelectronics Progress, 2017, 54(8): 082201.