应用光学, 2005, 26 (3): 64, 网络出版: 2006-05-19
油管位置光电检测技术的研究
Research on Photoelectric Measurement of the Vitta's Position
摘要
本文提出了一种测量汽车油管位置的方法.该方法采用平行光投影的光学系统,以高分辨率面阵CCD成像,通过数字信号处理(DSP)系统进行图像采集与处理,处理速度快,可以实现实时处理.在图像处理中,采用合适的边缘检测方法,提高了测量精度.数据处理中采用了最小二乘法拟合曲线,可以精确的拟合出油管像的曲线.与理论曲线相比较,就可以有效地测量油管的位置.
Abstract
A method to measure the vitta's position is given in this paper.The method takes use of collimated beam projection optics and high-resolution CCD to obtain images. The image acquisition, image processing are all resolved by digital signal processing(DSP) system. The processing velocity is so fast as to realize the real-time measurement. In image processing, a suitable edge detection method is used to improve the measurement accuracy. Least square method is used to fit the curves of the vitta's position images in the data processing.
伏燕军, 杨坤涛, 张南洋生. 油管位置光电检测技术的研究[J]. 应用光学, 2005, 26(3): 64. 伏燕军, 杨坤涛, 张南洋生. Research on Photoelectric Measurement of the Vitta's Position[J]. Journal of Applied Optics, 2005, 26(3): 64.