[1] ZHENG Y Sh, ZHENG Sh Q, HE Y, et al. Research status and development trend of copper-based electrical contact materials[J]. Equipment for Electronic Products Manufacturing, 2020, 49(6): 1-6 (in Chinese).

[2] WU X L. Research on deburring process and experimental study of high-boltage button contact[D]. Xi’an: Xi’an University of Technology, 2017: 16-25 (in Chinese).

[3] ZHANG K Q. Study of fabrication and arc characteristic of copper-based contact materials bywaveformtest[D]. Harbin: Harbin Institute of Technology, 2012: 12-17 (in Chinese).

[4] ZHANG X H. Microstructure and properties of the Al2O3-Cu/ (W, Cr) electrical contact materials[D]. Luoyang: Henan University of Science and Technology, 2020: 20-36 (in Chinese).

[5] YANG L J, DING D, YUAN Y, et al. Influence of contact layer on the sulphur corrosion of copper conductors in power transformers[J]. High Voltage, 2022, 7(1):176-184.

[6] BIELE L, SCHAAF P, SCHMID F. Method for contact resistance determination of copper during fast temperature changes [J]. Journal of Materials Science, 2021, 56(5): 3827-3845.

[7] MAO X Y, ZHU L Q, LIU H C, et al. Cu/graphene composite coatings electrodeposited in a directly dispersed graphene solution after electrochemical exfoliation with enhanced oxidation resistance[J]. Journal of Alloys and Compounds, 2021, 882: 160706.

[8] ZUO T T, XUE J L, RU Y D, et al. The improved softening resistance and high electrical conductivity of the 3D graphene enhanced copper-based composite fabricated by liquid carbon source[J]. Materials Letters, 2021, 283(14): 688-699.

[9] ZHANG Zh G, LU X T, XU J R, et al. Characterization and tribological properties of graphene/copper composites fabricated by electroless plating and powder metallurgy[J]. Acta Metallurgica Sinica (English Letters), 2022, 33(7): 903-912.

[10] CUI L, LUO R, WANG L, et al. Novel copper-impregnated carbon strip for sliding contact materials[J]. Journal of Alloys and Compounds, 2017, 735: 1846-1853.

[11] WU M L, HOU B S, SHU S C, et al. High oxidation resistance of cvd graphene-reinforced copper matrix composites[J]. Nanomaterials, 2019, 9(4): 498-504.

[12] LIU Zh, FANG J, LI Y Ch, et al. Pore characteristics of SiC/SiC composite thick plate machined by femtosecond laser[J]. Laser Technology, 2022, 46(6):736-741 (in Chinese).

[13] LI L Ch, WEI X. Influence of WC on crack formation mechanism of laser cladding composite coating[J]. Laser Technology, 2023,47(1):52-58 (in Chinese).

[14] KOHLER R, TREDICUCCI A, BELTRAM F, et al. Terahertz semiconductor-heterostructure laser[J]. Nature, 2002, 417(6885): 156-159.

[15] YE X H, LONG J Y, LIN Zh, et al. Direct laser fabrication of large-area and patterned graphene at room temperature[J]. Carbon, 2014, 68: 784-790.

[16] YE X H. Rapid laser in-situ growth of grapheme and its anti-corrosion performance[D]. Beijing: Tsinghua University, 2015: 95-120 (in Chinese).

[17] LIU H L, ZHENG Y X, MOON K S, et al. Ambient-air in situ fa-brication of high-surface-area, superhydrophobic, and microporous few-layer activated graphene films by ultrafast ultraviolet laser for enhanced energy storage[J]. Nano Energy, 2022, 94: 106902.

[18] DAI D H, GU D D. Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments[J]. Materials and Design, 2014, 55: 482-491.

[19] FANG Y X, QI L J, WANG K, et al. Study on structure and properties of Ni60 coating by pulse laser cladding on pure copper[J]. Laser Technology, 2017, 41(1): 40-46 (in Chinese).