157 nm激光微加工过程中激光参量对刻蚀性能的影响
[1] PUSEL A, HESS P. Time-of-flight analysis and modeling of photochemical hydrogen desorption from silicon (111) with an F2 laser[J]. Surface Science,1999,433/435:74-78.
[2] HERMAN P R, MARJORIBANKS R S, OETTL A, et al. Laser shaping of photonic materials: deep-ultraviolet and ultrafast lasers [J]. Applied Surface Science, 2000, 154/155(1/4):577-586.
[3] GREUTERS J, RIZVI N H. Laser micromachining of optical materials with a 157nm fluorine laser[J]. Procecdings of SPIE, 2002, 4941:77-83.
[4] LIAO Y S, CHEN Y T, CHAO C L, et al. Surface morphology and sub-surface damaged layer of various glasses machined by 193nm ArF excimer laser[J]. Proceedings of SPIE, 2005, 5715:110-117.
[7] ENDERT H, KAUF M, MAYER E, et al. Microstructuring with 157nm laser light [J]. Proceedings of SPIE,1999,3618:413-417.
[9] DAI Y T, XU G, LI W L. Laser micromachining of wide bandgap materials[J]. Advanced Materials Research,2009,69/70:118-122.
戴玉堂, 崔健磊, 徐刚, 白帆. 157 nm激光微加工过程中激光参量对刻蚀性能的影响[J]. 激光技术, 2011, 35(1): 36. DAI Yu-tang, CUI Jian-lei, XU Gang, BAI Fan. Influence of laser parameters on etching performance during 157nm laser micromachining[J]. Laser Technology, 2011, 35(1): 36.