[1] Alagna P, Zurita O, Timoshkov V, et al. Optimum ArFi light source bandwidth for 10 nm node logic imaging performance[C]. SPIE, 2015, 9426: 942609.

[2] Bouchoms I, Leenders M, Kuit J J, et al. Extending 1.35 NA immersion lithography down to 1x nm production nodes[C]. SPIE, 2012, 8326: 83260L.

[3] 姚汉明, 胡松, 邢廷文. 光学投影曝光微纳加工技术[M]. 北京: 北京工业大学出版社, 2006: 61-62.

    Yao Hanming, Hu Song, Xing Tingwen. Guangxue touying baoguang weina jiagong jishu[M]. Beijing: Beijing University of Technology Press, 2006: 61-62.

[4] 曾爱军, 王向朝, 徐德衍. 投影光刻机调焦调平传感技术的研究进展[J]. 激光与光电子学进展, 2004, 41(7): 24-30.

    Zeng Aijun, Wang Xiangchao, Xu Deyan. Progress in focus and level sensor for projection lithography system[J]. Laser & Optoelevtronics Progress, 2004, 41(7): 24-30.

[5] 胡建明, 曾爱军, 王向朝. 光栅成像位置传感器中的偏振调制技术[J]. 中国激光, 2006, 33(10): 1397-1401.

    Hu Jianming, Zeng Aijun, Wang Xiangzhao. Polarization modulation technology for a position sensor with grating imaging[J]. Chinese J Lasers, 2006, 33(10): 1397-1401.

[6] 冯金花, 胡松, 李艳丽, 等. 基于叠栅条纹相位解析的纳米检焦方法[J]. 光学学报, 2015, 35(2): 0212005.

    Feng Jinhua, Hu Song, Li Yanli, et al. Nano focusing method based on moire fringe phase analysis[J]. Acta Optica Sinica, 2015, 35(2): 0212005.

[7] 严伟, 李艳丽, 陈铭勇, 等. 基于光闸叠栅条纹的纳米检焦方法[J]. 光学学报, 2011, 31(8): 0805001.

    Yan Wei, Li Yanli, Chen Mingyong, et al. Moire fringebased focusing-test scheme for optical projection lithography[J]. Acta Optica Sinica, 2011, 31(8): 0805001.

[8] 杨桂栓, 陈涛, 张志峰. 基于激光三角法对透明平板厚度测量光线补偿的研究及应用[J]. 中国激光, 2015, 42(7): 0708004.

    Yang Guishuan, Chen Tao, Zhang Zhifeng. Study and application on transparent plate thickness measurement based on laser triangulation with light compensation[J]. Chinese J Lasers, 2015, 42(7): 0708004.

[9] 耿云飞, 陈曦, 金文, 等. 海水折射率对差分激光三角法油膜厚度测量精度的影响[J]. 中国激光, 2015, 42(4): 0408004.

    Geng Yunfei, Chen Xi, Jin Wen, et al. Influence of seawater refractive index on the precision of oil film thickness measurement by differential laser triangulation[J]. Chinese J Lasers, 2015, 42(4): 0408004.

[10] van der Werf J E. Optical focus and level sensor for wafer steppers[J]. J Vac Sci Technol B, 1992, 10(2): 735-740.

[11] Smith D G. Wafer thin film effects in lithographic focus detection[C]. SPIE, 2012, 8550: 85503L.

[12] Hidaka Y, Uchikawa K, Smith D G. Error analysis and compensation method of focus detection in exposure apparatus[J]. Optical Society of America A, 2009, 26(1): 10-18.

[13] Teunissen P A A, Broodbakker P J M, Queens R M G J. Lithographic apparatus, level sensor, method of inspection, device manufacturing method, and device manufactured thereby: US, 7646471[P]. 2010-01-12.

[14] Den Boef A H, Benschop J P H, Brinkhof R, et al. Level sensor, lithographic apparatus, and substrate surface positioning method: US, 8675210[P]. 2014-03-18.

[15] 孙裕文, 李世光, 宗明成. 基于空间分光的纳米级调焦调平测量技术[J]. 光学学报, 2016, 36(5): 0512002.

    Sun Yuwen, Li Shiguang, Zong Mingcheng. Nanoscale focusing and leveling measurement technology based on optical spatial split[J]. Acta Optica Sinica, 2016, 36(5): 0512002.