[1] 王占和, 朱永伟, 范仲俊. 摩擦副表面圆形微坑特种加工工艺设计和试验[J]. 制造技术与机床, 2009, (4): 87-90.

    Wang Zhanhe, Zhu Yongwei, Fan Zhongjun. Design and rest of special machining for micro-pits of working surface between friction pairs [J]. Manufacturing Technology & Machine Tool, 2009, (4): 87-90.

[2] G Ryk, Y Kligerman, I Etsion. Experimental investigation of laser surface-texturing for reciprocating automotive components [J]. Tribol Trans, 2002, 45(4): 444-449.

[3] Etsion I. Improving tribological performance of mechanical components by laser surface texturing [J]. Tribol Liet, 2003, 17(4): 733-737.

[4] 龙芋宏. 激光电化学微加工机理与实验研究 [D]. 武汉: 华中科技大学, 2007.

    Long Yuhong. Research on Mechanism and Experiment of Laser Electrochemical Micromachining Process [D]. Wuhan: Huazhong University of Science and Technology, 2007.

[5] Childs T HG, Hauser G, Badrossamay M. Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling [J]. Proc Inst Mech Eng B: J Eng Manuf, 2005, 219(4): 339-357.

[6] 刘会霞, 邢安, 张惠中, 等. 聚氯乙烯激光透射焊接温度场的有限元模拟[J]. 中国激光, 2008, 35(11): 1801-1807.

    Liu Huixia, Xing An, Zhang Huizhong, et al.. Temperature field simulation on laser transmission welding of polyvinylchloride [J]. Chinese J Lasers, 2008, 35(11): 1801-1807.

[7] 陈怡星. 激光微造型技术中表面微形貌的数值模拟研究[J]. 机械设计与制造, 2010, (9): 208-210.

    Chen Yixing. Numerical simulation of 3-dimensional internal showing of the surface induced by laser micro-texturing [J]. Machinery Design & Manufacture, 2010, (9): 208-210.

[8] 江天, 程湘爱. DF激光辐照对熔石英表面温度与应力分布的理论模拟[J]. 中国激光, 2011, 38(s1): s106001.

    Jiang Tian, Cheng Xiang′ai. Theoretical simulation of surface temperature and stress distribution of fused silica under DF laser irradiation [J]. Chinese J Lasers, 2011, 38(s1): s106001.

[9] 张朝阳, 李中洋, 秦昌亮, 等. 脉冲激光与电化学复合的应力刻蚀加工质量研究[J]. 物理学报, 2013, 62(9): 094210.

    Zhang Zhaoyang, Li Zhongyang, Qin Changliang, et al.. Analysis of stress-etching quality based on nanosecond pulse laser electrochemical machining [J]. Acta Physica Sinica, 2013, 62(9): 094210.

[10] 张磊, 张庆茂. 激光打孔过程的数值模拟[J]. 机电工程技术, 2009, 38(8): 16-18.

    Zhang Lei, Zhang Qingmao. The numerical simulation of process in laser drilling [J]. Mechanical & Electrical Engineering Technology, 2009, 38(8): 16-18.

[11] 张华. 喷射液束电解—激光复合加工的基础研究[D]. 南京: 南京航空航天大学, 2009.

    Zhang Hua. Basic Research on Hybrid Processing of Laser Beam Machining Combined with Jet Electrochemical Machining [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2009.

[12] Chung CK, Lin SL. CO2 laser micromachined crackless through holes of Pyrex 7740 glass [J]. Int J Mach Tool Manuf, 2010, 50(11): 961-968.

[13] Negarestani R, Sundar M, Sheikh MA, et al.. Numerical simulation of laser machining of carbon-fibre-reinforced composites [J]. Proc Inst Mech Eng B: J Eng Manuf, 2010, 224(7): 1017-1027.

[14] Y Yan, L Li, K Sezer, et al.. CO2 laser underwater machining of deep cavities in alumina [J]. J Eur Ceram Soc, 2011, 31(15): 2793-2807.

[15] 郭桂芳, 陈芙蓉, 李林贺. 7075铝合金电子束焊接温度场数值模拟[J]. 焊接, 2006, (3): 28-30.

    Guo Guifang, Chen Furong, Li Linhe. Numerical simulation of temperature field of electron beam welding for 7075 alloy [J]. Welding, 2006, (3): 28-30.

[16] 黄延禄, 杨福华, 梁工英, 等. 用原位法测定铝合金对激光的吸收率[J].中国激光, 2003, 30(5): 449-453.

    Huang Yanlu, Yang Fuhua, Liang Gongyin, et al.. Using in-situ technique to determine laser absorptivity of Al-alloy [J]. Chinese J Lasers, 2003, 30(5): 449-453.

[17] 褚庆臣, 虞刚, 卢国权. 激光打孔工艺参数对孔型影响的二维数值模拟研究[J]. 中国激光, 2011, 38(6): 0603001.

    Chu Qingchen, Yu Gang, Lu Guoquan. Two-dimensional numerical investigation for the effects of laser process parameters on hole type during laser drilling [J]. Chinese J Lasers, 2011, 38(6): 0603001.

[18] 宋少云. 多场耦合问题的建模与耦合关系的研究[J]. 武汉工业学院学报, 2005, 24(4): 21-23.

    Song Shaoyun. Modeling of multiphysics problem and research of coupling relation [J]. J Wuhan Polytechnic University, 2005, 24(4): 21-23.