基于投影光刀的关节面轮廓旋转检测

王小娟; 刘丙才

doi:doi:10.3788/lop55.091205

激光与光电子学进展, 2018, 55 (9): 091205, 网络出版: 2018-09-08

基于投影光刀的关节面轮廓旋转检测下载： 515次

Rotation Detection of Prosthetic Joint Surface Profile Based on Projection Light Knife

论文大纲

王小娟 ^1,*刘丙才 ²

作者单位

¹ 西安工业大学理学院, 陕西西安 710032

² 西安工业大学光电工程学院, 陕西西安 710032

AI 词云图 AI语音精读 AI语音超短摘要

注：本部分内容由 AI 自动生成，请您知悉。

摘要

设计了基于投影光刀的关节面三维轮廓旋转检测系统。采用摄像机针孔模型, 实现了检测系统的快速标定; 通过优化的重心算法, 提取出投影光刀的中心线, 获取了关节面的截面轮廓线; 通过分析投影光刀平面与转轴之间的夹角, 完成了截面轮廓线的倾斜校正, 实现了关节面三维轮廓数据的准确重建。结果表明, 该检测系统具有非接触、高精度等特点, 可有效解决股骨假体关节面的复杂轮廓检测问题。

Abstract

A rotation detection system of three-dimensional (3D) joint surface profile based on projection light knife is designed. The rapid calibration of the detection system is realized by the use of the camera pinhole model. The center-line of the projection light knife is extracted through the optimized center of gravity algorithm, and thus the contour line of the joint surface is acquired. The oblique correction of section profile is realized by the analysis of the angle between the projection light knife plane and the rotation axis. The 3D profile data of joint surface are accurately reconstructed. The results show that the detection system possesses the advantages such as non-contact and high precision, which can be used to solve the detection problem of prosthetic joint surface profile.

参考文献

[1] 王建平. 膝关节力学建模与屈曲运动生物力学特性研究［D］. 上海: 上海交通大学, 2010: 16-29.

Wang J P. Human knee biomechanics modelling and research on biomechanical characteristics of flexion movement［D］. Shanghai: Shanghai Jiaotong University, 2010: 16-29.

[2] 迟岩. 人工股骨假体柄的个体化建模及应力分析［D］. 长春: 吉林大学, 2004: 22-28.

Chi Y. The individual modeling and stress analysis of artificial femoral prosthesis stem［D］. Changchun: Jilin University, 2004: 22-28.

[3] 苏显渝, 张启灿, 陈文静. 结构光三维成像技术［J］. 中国激光, 2014, 41(2): 0209001.

Su X Y, Zhang Q C, Chen W J. Three-dimensional imaging based on structured illumination［J］. Chinese Journal of Lasers, 2014, 41(2): 0209001.

[4] Zhang S. Recent progresses on real-time 3D shape measurement using digital fringe projection techniques［J］. Optics and Lasers in Engineering, 2010, 48(2): 149-158.

[5] 李泽宇, 陈一民, 赵艳, 等. 基于改进光线投影算法的医学图像三维重建［J］. 计算机应用研究, 2017, 34(12): 3866-3888.

Li Z Y, Chen Y M, Zhao Y, et al. Three dimensional reconstruction of medical images based on improved ray projection algorithm［J］. Application Research of Computers, 2017, 34(12): 3866-3888.

[6] 欧攀, 王婷, 李瑞祥. 一种基于结构光的牙齿三维测量系统［J］. 激光与光电子学进展, 2016, 53(1): 011102.

Ou P, Wang T, Li R X. A three-dimensional teeth measurement system based on structured light［J］. Laser & Optoelectronics Progress, 2016, 53(1): 011102.

[7] 李晓天, 张铁强, 张胜勇, 等. 基于激光三角法的小物体尺寸测量及三维重构系统［J］. 光学仪器, 2008, 30(6): 21-26.

Li X T, Zhang T Q, Zhang S Y, et al. Small object′s dimension measure and three-dimension reconstruction system based on laser triangulation［J］. Optical Instruments, 2008, 30(6): 21-26.

[8] 许丽, 张之江. 基于共面靶标的结构光标定方法［J］. 光电子·激光, 2009, 20(8): 1063-1069.

Xu L, Zhang Z J. Calibration in structured light system using coplanar target［J］. Journal of Optoelectronics·Laser, 2009, 20(8): 1063-1069.

[9] 张曦, 张健. 线结构光标定方法综述［J］. 激光与光电子学进展, 2018, 55(2): 020001.

Zhang X, Zhang J. Summary on calibration method of line-structured light［J］. Laser & Optoelectronics Progress, 2018, 55(2): 020001.

[10] 柴兴华, 高峰, 楚博策, 等. 一种即时平面标定的二维视觉测量方法［J］. 光学学报, 2018, 38(7): 0712001.

Chai X H, Gao F, Chu B C, et al. Two-dimensional vision measurement method with immediate plane calibration［J］. Acta Optica Sinica, 2018, 38(7): 0712001.

[11] 蔡怀宇, 冯召东, 黄战华. 基于主成分分析的结构光条纹中心提取方法［J］. 中国激光, 2015, 42(3): 0308006.

Cai H Y, Feng Z D, Huang Z H. Centerline extraction of structured light strip based on principal component analysis［J］. Chinese Journal of Lasers, 2015, 42(3): 0308006.

[12] 江永付, 江开勇, 林俊义. 线结构光光条中心亚像素精确提取方法［J］. 激光与光电子学进展, 2015, 52(7): 071502.

Jiang Y F, Jiang K Y, Lin J Y. Extraction method for sub-pixel center of linear structured light stripe［J］. Laser &Optoelectronics Progress, 2015, 52(7): 071502.

[13] 李莹莹, 张志毅, 袁林. 线结构光光条中心提取综述［J］. 激光与光电子学进展, 2013, 50(10): 100002.

Li Y Y, Zhang Z Y, Yuan L. Survey on linear structured light stripe center extraction［J］. Laser & Optoelectronics Progress, 2013, 50(10): 100002.

[14] 王珊, 徐晓. 基于双目单视面的三维重建［J］. 光学学报, 2017, 37(5): 0515004.

Wang S, Xu X. 3D reconstruction based on horopter［J］. Acta Optica Sinica, 2017, 37(5): 0515004.

王小娟, 刘丙才. 基于投影光刀的关节面轮廓旋转检测[J]. 激光与光电子学进展, 2018, 55(9): 091205. Wang Xiaojuan, Liu Bingcai. Rotation Detection of Prosthetic Joint Surface Profile Based on Projection Light Knife[J]. Laser & Optoelectronics Progress, 2018, 55(9): 091205.

基于投影光刀的关节面轮廓旋转检测下载： 515次

关于本站 Cookie 的使用提示

全站搜索

基于投影光刀的关节面轮廓旋转检测 下载： 515次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

基于投影光刀的关节面轮廓旋转检测下载： 515次