[1] 方正春. 耐热和导电铜合金发展现状[J]. 材料开发与应用, 1997, 12(4): 27-31.
Fang Z C. Present status of heat resistant and electrical conductive copper alloys[J]. Development and Application of Materials, 1997, 12(4): 27-31.
[2] Rawson A, Kisi E, Sugo H, et al. Effective conductivity of Cu-Fe and Sn-Al miscibility gap alloys[J]. International Journal of Heat and Mass Transfer, 2014, 77: 395-405.
[3] 张生龙, 尹志民. 高强高导铜合金设计思路及其应用[J]. 材料导报, 2003, 17(11): 26-29.
Zhang S L, Yin Z M. High-strength and high-conductivity copper alloys: designing considerations and their application[J]. Materials Review, 2003, 17(11): 26-29.
[4] Tenwick M J, Davies H A. Enhanced strength in high conductivity copper alloys[J]. Materials Science and Engineering, 1988, 98: 543-546.
[5] 袁孚胜, 钟海燕. 引线框架铜合金材料的研究现状及发展趋势[J]. 有色冶金设计与研究, 2015, 36(2): 36-38.
Yuan F S, Zhong H Y. Research status and development trend of lead frame copper alloy materials[J]. Nonferrous Metals Engineering & Research, 2015, 36(2): 36-38.
[6] Zhou S F, Wu C, Zhang T Y, et al. Carbon nanotube- and Fep-reinforced copper-matrix composites by laser induction hybrid rapid cladding[J]. Scripta Materialia, 2014, 76: 25-28.
[7] Zhou S F, Lei J B, Xiong Z, et al. Synthesis of Fep/Cu-Cup/Fe duplex composite coatings by laser cladding[J]. Materials & Design, 2016, 97: 431-436.
[8] Dai X Q, Xie M, Zhou S F, et al. Formation mechanism and improved properties of Cu95Fe5 homogeneous immiscible composite coating by the combination of mechanical alloying and laser cladding[J]. Journal of Alloys and Compounds, 2018, 740: 194-202.
[9] 董江, 陈岁元, 刘大亮, 等. 铜合金表面激光原位制备钴基合金涂层的结构与机制[J]. 中国激光, 2009, 36(5): 1302-1307.
Dong J, Chen S Y, Liu D L, et al. Structure and mechanism of Co-based alloy coating with laser inducing in-situ synthesis on the surface of copper alloy[J]. Chinese Journal of Lasers, 2009, 36(5): 1302-1307.
[10] Abbas S F, Kim T S. Effect of lattice strain on the electrical conductivity of rapidly solidified copper-iron metastable alloys[J]. Journal of Alloys and Compounds, 2018, 732: 129-135.
[11] Munitz A, Abbaschian R. Microstructure of Cu-Co alloys solidified at various supercoolings[J]. Metallurgical and Materials Transactions A, 1996, 27(12): 4049-4059.
[12] Li D, Robinson M B, Rathz T J, et al. Direct determination of the metastable liquid miscibility gap in undercooled Cu-Co alloys[J]. Materials Letters, 1998, 36(1/2/3/4): 152-156.
[13] CuriottoS,
Pryds NH,
JohnsonE,
et al. Effect of cooling rate on the solidification of Cu58Co42[J]. Materials Science and
EngineeringA,
2007,
449/450/451:
644-
648.
[14] Wang C P. Formation of immiscible alloy powders with egg-type microstructure[J]. Science, 2002, 297(5583): 990-993.
[15] Nagase T, Suzuki M, Tanaka T. Formation of amorphous phase with crystalline globules in Fe-Cu-Nb-B immiscible alloys[J]. Journal of Alloys and Compounds, 2015, 619: 267-274.
[16] Dai X Q, Zhou S F, Wang M F, et al. Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding[J]. Surface and Coatings Technology, 2017, 324: 518-525.
[17] Liu S C, Jie J C, Guo Z K, et al. Solidification microstructure evolution and its corresponding mechanism of metastable immiscible Cu80Fe20 alloy with different cooling conditions[J]. Journal of Alloys and Compounds, 2018, 742: 99-106.
[18] Jiao X Y, Wang J, Wang C M, et al. Effect of laser scanning speed on microstructure and wear properties of T15M cladding coating fabricated by laser cladding technology[J]. Optics and Lasers in Engineering, 2018, 110: 163-171.
[19] Wang X Y, Zhou S F, Dai X Q, et al. Evaluation and mechanisms on heat damage of WC particles in Ni60/WC composite coatings by laser induction hybrid cladding[J]. International Journal of Refractory Metals and Hard Materials, 2017, 64: 234-241.
[20] 谢敏, 戴晓琴, 赵淑珍, 等. 激光熔覆自组装Cu92Fe8偏晶复合涂层的相分离特征与性能[J]. 中国激光, 2018, 45(7): 0702010.
Xie M, Dai X Q, Zhao S Z, et al. Phase separated characteristics and properties of self-assembled Cu92Fe8 immiscible composite coating by laser cladding[J]. Chinese Journal of Lasers, 2018, 45(7): 0702010.
[21] Dai X Q, Zhou S F, Wang M F, et al. Effect of substrate types on the microstructure and properties of Cu65Fe35 composite coatings by laser induction hybrid cladding[J]. Journal of Alloys and Compounds, 2017, 722: 173-182.
[22] Dai X Q, Xie M, Zhou S F, et al. Formation and properties of a self-assembled Cu-Fe-Ni-Cr-Si immiscible composite by laser induction hybrid cladding[J]. Journal of Alloys and Compounds, 2018, 742: 910-917.
[23] Zhou S F, Dai X Q, Xie M, et al. Phase separation and properties of Cu-Fe-Cr-Si-C immiscible nanocomposite by laser induction hybrid cladding[J]. Journal of Alloys and Compounds, 2018, 741: 482-488.
[24] Zeng D W, Xie C S, Wang M Q. In situ synthesis and characterization of Fep/Cu composite coating on SAE 1045 carbon steel by laser cladding[J]. Materials Science and Engineering A, 2003, 344(1/2): 357-364.
[25] Kök M, Özdin K. Wear resistance of aluminium alloy and its composites reinforced by Al2O3 particles[J]. Journal of Materials Processing Technology, 2007, 183(2/3): 301-309.
[26] Lei J B, Shi C, Zhou S F, et al. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding[J]. Surface and Coatings Technology, 2018, 334: 274-285.
[27] Zhou S F, Lei J B, Dai X Q, et al. A comparative study of the structure and wear resistance of NiCrBSi/50 wt.% WC composite coatings by laser cladding and laser induction hybrid cladding[J]. International Journal of Refractory Metals and Hard Materials, 2016, 60: 17-27.
[28] Kumar S, Panwar R S, Pandey O P. Effect of dual reinforced ceramic particles on high temperature tribological properties of aluminum composites[J]. Ceramics International, 2013, 39(6): 6333-6342.
[29] Kumar S, Sharma V, Panwar R S, et al. Wear behavior of dual particle size (DPS) zircon sand reinforced aluminum alloy[J]. Tribology Letters, 2012, 47(2): 231-251.
[30] Sharma V, Kumar S, Panwar R S, et al. Microstructural and wear behavior of dual reinforced particle (DRP) aluminum alloy composite[J]. Journal of Materials Science, 2012, 47(18): 6633-6646.
[31] 曾晓雁.
激光熔覆金属陶瓷复合层中陶瓷相的行为研究[D].
武汉: 华中理工大学,
1993.
Zeng XY.
Behavior of ceramic phase in laser cladding cermet composite layer[D].
Wuhan: Huazhong University of Science and Technology,
1993.