点衍射干涉仪波面参考源误差及公差分析

为了保留光纤点衍射干涉仪容易对准以及衍射光束易于控制的优点，同时又能实现大数值孔径(NA)光学系统的检测，设计了一种新型的波面参考源(WRS)，它保留了光纤点衍射和微孔点衍射的优点，可满足大NA极紫外光刻物镜系统波像差检测的要求。本文在分析各种误差的基础上，搭建了WRS原理光路并对WRS的系统误差标定算法进行详细的研究，得到WRS标定时旋转平台的角度公差为0.5°，跳径时偏离系数为0.5%。这一新型WRS误差分析及标定对于实现高精度的检测具有十分重要的意义，最终为实现WRS系统误差标定提供理论基础。

Abstract

To keep the advantages of fiber point diffraction interferometer which is easy to align and control the diffracted light, we design a new wavefront reference source(WRS). WRS can keep the advantages of fiber point diffraction interferometer and pin-hole point diffraction interferometer, and it also can be used to test the wavefront aberration of larger NA optical system for Extreme Ultraviolet Lithography(EUVL). The analysis of error for this new WRS and calibration of the system error is very important for realizing a more accurate test of wavefront aberration. Based on the analysis of various errors, we study the calibration algorithm in detail, and obtain the tolerance of several WRS important components including that the angle tolerance of rotation stage is 0.5° and the deviation factor is 0.5% when rotation is away optical axis.

参考文献

[1] OTAKIK,YAMAMOTOT. Accuracy evaluation of the point diffraction interferometer for extreme ultraviolet lithography aspheric mirror[J]. J. Vac.Sci. Technol. B,2002,20(1): 295-300.

[2] SOMMARGRENG E,PHILLIOND W,JOHNM A,et al.. 100-picometer interferometry for EUVL[J]. SPIE,2002,4688: 316.

[3] TAYLORJ S,SOMMARGRENG E,SWEENEYD W,et al.. The fabrication and testing of optics for EUV projection lithography[J]. SPIE,1998,3331: 580-590.

[4] TAKEUCHI S,KAKUCHI O,YAMAZOEK,et al.. Visible light point-diffraction interferometer for testing of EUVL optics[J]. SPIE,2006: 61510E-1-8.

[5] SMARTT R N,STRONG J. Point diffraction interferometer[J]. Opt. Soc. Am.,1974,62: 737-742.

[6] SOMMARGREN G E. Diffraction methods raise interferometer accuracy[J]. Laser Focus World,1996,32(8): 61-66.

[7] 刘国淦，张学军，王权陡,等.光纤点衍射干涉仪技术研究[J].光学精密工程，2001,9(2): 142-145.

LIU G G,ZHANG X J,WANG Q D,et al.. Fiber point diffraction[J]. Opt. Precision Eng.,2001,9(2): 142-145.(in Chinese)

[8] 张宇.极紫外光刻物镜系统波像差检测技术研究[D].长春：中国科学院长春光学精密机械与物理研究所，2012.

ZHANG Y. Research of measuring technology for wavefront aberration of EUVL objective system[D]. Changchun: Changchun Insitute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,2012.(in Chinese)

[9] JOHNSONM A,PHILLIOND W,SOMMARGRENG E,et al.. Construction and testing of wavefront reference sources for interferometry of ultra-precise imaging systems[J]. SPIE,2005,5869: 156.

[10] 卢增雄，金春水，张立超,等.极紫外三维小孔矢量衍射波面质量分析[J].光学学报，2012,30(10): 2849-2854.

LU Z X,JIN CH SH,ZHANG L CH,et al..Wavefront quality analysis of three-dimension pinhole vector diffractional in extreme ultraviolet region[J]. Acta Optica Sinica,2012,30(10): 2849-2854.(in Chinese)

[11] 师途，杨甬英，张磊,等.非球面光学元件的面形检测技术[J].中国光学，2014,7(1): 26-46.

SHI T,YANG YY,ZHANG L,et al.. Surface testing methods of aspheric optical elements[J]. Chinese Optics,2014,7(1): 26-46.(in Chinese)

[12] PHILLION D W,SOMMARGRENG E. Calibration of symmetric and non-sysmmetric errors for interferometry of ultra-precise imaging systems[J]. SPIE,2005,58690R-1-12.

[13] 于杰.用于相移点衍射干涉仪的加权最小二乘相位提取算法[J].中国光学，2010,3(6): 605-615.

YU J. Weighted least square phase extraction algorithm for phase-shifting diffraction interferometer[J]. Chinese Optics,2010,3(6): 605-615.(in Chinese)

代晓珂, 金春水, 于杰. 点衍射干涉仪波面参考源误差及公差分析[J]. 中国光学, 2014, 7(5): 855. DAI Xiao-ke, JIN Chun-shui, Yu Jie. Analysis on error and tolerance for the wavefront reference source of point diffraction interferometer[J]. Chinese Optics, 2014, 7(5): 855.

点衍射干涉仪波面参考源误差及公差分析

关于本站 Cookie 的使用提示

全站搜索

点衍射干涉仪波面参考源误差及公差分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索