[1] Guan H, Guo H. An optimized fitting function with least square approximation in InAs/AlSb HFET small-signal model for characterizing the frequency dependency of impact ionization effect［J］. Chinese Physics B, 2017, 26(5):058501.

[2] Chiu H C, Lin W Y, Chou C Y, et al. Device stress evaluation of InAs/AlSb HEMT on silicon substrate with refractory iridium Schottky gate metal［J］. Microelectronic Engineering, 2015,138, 17-20.

[3] Malmkvist M. Optimization of narrow bandgap HEMTs for low-noise and low-power applications［D］. Chalmers University of Technology, 2008.

[4] Lefebvre E, Borg M, Malmkvist M, et al. (Cl2: Ar) ICP/RIE dry etching of Al(Ga)Sb for AlSb/InAs HEMTs［C］. Indium Phosphide & Related Materials, 2007. IPRM'07. IEEE 19th International Conference on. IEEE, 2007: 125-128.

[5] Moschetti G. Ultra-low power InAs/AlSb HEMTs for cryogenic low-noise applications［D］. Chalmers University of Technology, 2012.

[6] Robinson J A, Mohney S E, Boos J B, et al. Pd/Pt/Au ohmic contact for AlSb/InAs0.7Sb0.3 heterostructures［J］. Solid-state electronics, 2006, 50(3): 429-432.

[7] Dormaier R, Zhang Q, Liu B, et al. Thermal stability of Pd/Pt/Au Ohmic contacts to InAlSb/InAs heterostructures for high electron mobility transistors［J］. Journal of Applied Physics, 2009, 105(4):044505.

[8] Lefebvre E, Malmkvist M, Borg M, et al. Gate-recess technology for InAs/AlSb HEMTs［J］. IEEE Transactions on Electron Devices, 2009, 56(9):1904-1911.

[9] Moschetti G, Lefebvre E, Fagerlind M, et al. DC, RF and noise performance of InAs/AlSb HEMTs with in situ CVD SiNx-film for early-protection against oxidation［J］. Solid-State Electronics, 2013, 87:85-89.

[10] Lefebvre E, Moschetti G, Malmkvist M, et al. Comparison of shallow-mesa InAs/AlSb HEMTs with and without early-protection for long-term stability against Al(Ga)Sb oxidation［J］. Semiconductor Science and Technology, 2014, 29(3):035010.

[11] Wang J, Wang G W, Xu Y Q, et al. Molecular beam epitaxy growth of high electron mobility InAs/AlSb deep quantum well structure［J］. Journal of Applied Physics, 2013, 114(1): 013704.

[12] Duffy S J, Benbakhti B, Mattalah M, et al. Low source/drain contact resistance for AlGaN/GaN HEMTs with high Al concentration and Si-HP ［111］substrate ［J］. ECS Journal of Solid State Science and Technology, 2017,6(11):3040-3043.

[13] Mehdi Rzin, Jean-Marc Routoure, Bruno Guillet, et al. Impact of gate-drain spacing on low-frequency noise performance of InSitu SiN passivated InAlGaN/GaN MIS-HEMTs ［J］. Transactions on Electron Device, 2017: 64(7).

[14] Waldron N, Kim D H, Del Alamo J A. Non-thermal alloyed ohmic contact process of GaN-based HEMTs by pulsed laser annealing［J］. Semiconductor Science and Technology, 2016, 31:055003.

[15] Lysczek E M, Robinson J A, Mohney S E. Ohmic contacts to p-type InAs ［J］. Materials Science and Engineering B.2006, 134:44-48.