[1] AHN S H, GUO L J. Large-area roll-to-roll and roll-to-plate nanoimprint lithography: A step toward high-throughput application of continuous nanoimprinting［J］. ACS Nano, 2009, 3(8): 2304-2310.

[2] BLSI B, TUCHER N, HHN O, et al.. Large area patterning using interference and nanoimprint lithography［C］//Micro-Optics 2016. International Society for Optics and Photonics, 2016, 9888: 98880H.

[3] KOBRIN B, BARNARD E S, BRONGERSMA M L, et al.. Rolling mask nanolithography: The pathway to large area and low cost nanofabrication［J］. SPIE, 2012, 8249: 82490O.

[4] LAN H, DING Y, LIU H. Nanoimprint Lithography: Principles, Processes and Materials［M］. New York: Nova Science Publishers, 2011.

[5] 孟繁斐, 步敬. 集成成像系统中高填充率微透镜阵列的设计与加工［J］. 光学 精密工程, 2017, 25(8): 2130-2138.

    MENG F F, BU J. Design and fabrication for micro-lens array with high fill factor in integral imaging system［J］. Opt. Precision Eng., 2017, 25(8): 2130-2138. (in Chinese)

[6] 郑永广, 张然, 刘泽, 等. 添加剂对纳米压印模板光栅结构填充效果的改善作用［J］. 光子学报, 2018, 47(9): 114-120.

    ZHENG Y G, ZHANG R, LIU Z, et al.. Usage of additive for the improvement of the filling effect during filling the grating structure of the nanoimprint stamp［J］. Acta Photonica Sinica, 2018, 47(9): 114-120. (in Chinese)

[7] DUMOND J J, YEE LOW H. Recent developments and design challenges in continuous roller micro- and nanoimprinting［J］. Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 2012, 30(1): 010801.

[8] CHUANG C H, LU D M, WANG P H, et al.. Antireflective polymer films via roll to roll UV nanoimprint lithography using an AAO mold［J］. Microsystem Technologies, 2018, 24(1): 389-395.

[9] 陈鑫, 赵建宜, 王智浩, 等. 用多层掩模去除纳米压印工艺中的残胶［J］. 光学 精密工程, 2013,21(6): 1434-1439.

    CHEN X, ZHAO J Y, WANG ZH H, et al.. Clearing residual resist in nanoimprint lithography by multi-mask［J］. Opt. Precision Eng., 2013,21(6): 1434-1439. (in Chinese)

[10] 刘民哲, 王泰升, 李和福, 等. 静电场辅助的微压印光刻技术［J］. 光学 精密工程, 2017, 25(3): 663-671.

    LIU M ZH, WANG T SH, LI H F, et al.. Electrostatic field assisted micro imprint lithography technology［J］. Opt. Precision Eng., 2017, 25(3): 663-671. (in Chinese)

[11] AKTER T, DESAI S. Developing a predictive model for nanoimprint lithography using artificial neural networks［J］. Materials & Design, 2018, 160: 836-848.

[12] 褚金奎, 康维东, 曾祥伟, 等. 基于柔性纳米压印工艺制备中红外双层金属纳米光栅［J］. 光学 精密工程, 2017, 25(12): 3034-3040.

    CHU J K, KANG W D, ZENG X W, et al.. Fabrication of bilayer metallic nano gratings in mid-infrared region based on flexible nanoimprint lithography［J］. Opt. Precision Eng., 2017, 25(12): 3034-3040. (in Chinese)

[13] KIM K D, JEONG J H, PARK S H, et al.. Development of a very large-area ultraviolet imprint lithography process［J］. Microelectronic Engineering, 2009, 86(10): 1983-1988.

[14] AHN S. H, MILLER M, YANG S, et al.. High volume nanoscale roll-based imprinting using jet and flash imprint lithography［C］//Nanoengineering: Fabrication, Properties, Optics, and Devices X. International Society for Optics and Photonics, 2013, 8816: 881602.

[15] SHNEIDMAN A V, BECKER K P, LUKAS M A, et al.. All-polymer integrated optical resonators by roll-to-roll nanoimprint lithography［J］. ACS Photonics, 2018, 5(5): 1839-1845.

[16] AHN S H, GUO L J. High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates［J］. Advanced Materials, 2008, 20(11): 2044-2049.

[17] JOHN J, TANG Y Y, ROTHSTEIN J P, et al.. Large-area, continuous roll-to-roll nanoimprinting with PFPE composite molds［J］. Nanotechnology, 2013, 24(50): 505307.

[18] JI R, HORNUNG M, VERSCHUUREN M A, et al.. UV enhanced substrate conformal imprint lithography (UV-SCIL) technique for photonic crystals patterning in LED manufacturing［J］. Microelectronic Engineering, 2010, 87(5/6/7/8): 963-967.

[19] VERSCHUUREN M A, MEGENS M, NI Y, et al.. Large area nanoimprint by substrate conformal imprint lithography (SCIL)［J］. Adv. Opt. Techn., 2017, 6(3-4): 243-264.

[20] LAN H B. Large-area Nanoimprint Lithography and Applications［M］//Micro/Nanolithography - A Heuristic Aspect on the Enduring Technology. London: IntechOpen, 2018.

[21] VAN SCHOOT J, SCHIFT H. Next-generation lithography- an outlook on EUV projection and nanoimprint［J］. Advanced Optical Technologies, 2017, 6(3/4): 159-162.

[22] 兰红波, 郭良乐, 许权, 等. 大面积纳米压印光刻晶圆级复合软模具制造［J］. 光学 精密工程, 2018, 26(4): 894-905.

    LAN H B, GUO L L, XU Q, et al.. Wafer-level composite mold for large-area nanoimprint lithography［J］. Opt. Precision Eng., 2018, 26(4): 894-905. (in Chinese)

[23] 杨建军, 李红珂, 朱晓阳, 等. 高性能电加热玻璃3D打印与微转印复合制造工艺［J］. 光学 精密工程, 2019,27(4): 820-831.

    YANG J J, LI H K, ZHU X Y, et al.. Three-dimensional printing and micro-transfer composite manufacturing process for high performance glass heaters［J］. Opt. Precision Eng., 2019, 27(4): 820-831. (in Chinese)

[24] ZHU X, XU Q, LI H, et al.. Fabrication of high-performance silver mesh for transparent glass heaters via electric-field-driven microscale 3D printing and UV-assisted microtransfer［J］. Advanced Materials, 2019: 1902479.

[25] ZHU X, XU Q, LI H, et al.. Fabricating transparent electrodes by combined electric-field-driven fusion direct printing and the liquid bridge transfer method［J］. Journal of Physics D: Applied Physics, 2019, 52(24): 245103.

[26] ZHU X, XU Q, HU Y, et al.. Flexible biconvex microlens array fabrication using combined inkjet-printing and imprint-lithography method［J］. Optics & Laser Technology, 2019, 115: 118-124.

[27] 郭良乐. 面向大尺寸非平整衬底图形化的复合纳米压印研究［D］.青岛: 青岛理工大学,2018.

    GUO L L. Composite Nanoimprinting Lithography for Large-area and Non-flat Substrates Patterning ［D］. Qingdao: Qingdao University of Technology, 2018. (in Chinese)

[28] 李延强, 兰红波, 许权, 等. 纳米压印复合软模具建模研究［J］. 机械工程学报, 2018, 54(19): 170-181.

    LI Y Q, LAN H B, XU Q, et al.. Modeling of flexible composite mold for nanoimprint lithography［J］. Journal of Mechanical Engineering, 2018, 54(19): 170-181. (in Chinese)