钢纤维对莫来石质浇注料抗热震性的影响
[1] HASSELMAN D P H. Elastic energy at fracture and surface energy as design criteria for thermal shock［J］. J Am Ceram Soc, 1963, 46(11): 535-540.
[2] 赵维平. 耐火材料抗热震性试验方法探讨［J］. 耐火材料, 2013, 47(6): 476-480.
[3] AKSEL C, RILEY F L. Young′s modulus measurements of magnesia-spinel composites using load-deflection curves, sonic modulus, strain gauges and Rayleigh waves［J］. J Eur Ceram Soc, 2003, 23(16): 3089-3096.
[4] MIYAJI D Y, TONNESEN T, RODRIGUES J A. Fracture energy and thermal shock damage resistance of refractory castables containing eutectic aggregates［J］. Ceram Int, 2014, 40(9): 15227-15239.
[5] HOL?APEK O, REITERMAN P, KONVALINKA P. Binder for refractory cement composites-hydration, changing due to high temperatures and fracture Energy[J]. Mater Sci Forum, 2015, 824: 185–190.
[6] 于仁红, 周喜文, 刘鹏程, 等. 结合系统对刚玉基浇注料常温断裂行为的影响［J］. 耐火材料, 2017, 51(6): 408-413.
[7] VARGAS R, NEGGERS J, CANTO R B, et al. Analysis of wedge splitting test on refractory castable via integrated DIC［J］. J Eur Ceram Soc, 2016, 36(16): 4309-4317.
[8] VARGAS R, NEGGERS J, CANTO R B, et al. Comparison of two full-field identification methods for the wedge splitting test on a refractory［J］. J Eur Ceram Soc, 2018, 38(16): 5569-5579.
[9] 刘国齐, 杨金松, 李红霞, 等. 耐火材料断裂能的测试［J］. 耐火材料, 2011, 45(3): 223-224, 226.
[10] RIBEIRO S, RODRIGUES J A. The influence of microstructure on the maximum load and fracture energy of refractory castables［J］. Ceram Int, 2010, 36(1): 263-274.
[11] CUENCA E, FERRARA L. Fracture toughness parameters to assess crack healing capacity of fiber reinforced concrete under repeated cracking-healing cycles［J］. Theor Appl Fract Mech, 2020, 106: 1-12.
[12] DAI Y J, LI Y W, JIN S L, et al. Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions［J］. J Am Ceram Soc, 2019, 103(3): 1956-1969.
[13] LEE W E, VIEIRA W, ZHANG S, et al. Castable refractory concretes［J］. Int Mater Rev, 2001, 46(3): 145-167.
[14] BELRHITI Y, POP O, GERMANEAU A, et al. Investigation of the impact of micro-cracks on fracture behavior of magnesia products using wedge splitting test and digital image correlation［J］. J Eur Ceram Soc, 2015, 35(2): 823-829.
[15] ZHU T B, LI Y W, SANG S B, et al. Fracture behavior of low carbon MgO-C refractories using the wedge splitting test［J］. J Eur Ceram Soc, 2017, 37(4): 1789-1797.
[16] HARMUTH H, RIEDER K, KROBATH M, et al. Investigation of the nonlinear fracture behaviour of ordinary ceramic refractory materials［J］. Mater Sci Eng, A, 1996, 214: 53-61.
[17] HARMUTH H. Stability of crack propagation associated with fracture energy determined by wedge splitting specimen［J］. Theor Appl Fract Mech, 1995, 23: 103-108.
[18] 李代兵. 刚玉-尖晶石质钢包透气砖热震稳定性的研究［D］. 洛阳: 洛阳耐火材料研究院, 2008.
[19] LI Daibing. Investigation on the thermal shock resistance of the corundum-spinel porous plug for ladle (in Chinese dissertation). Luoyang: Luoyang Insitute of Refracotory Research, 2008.
冯海霞, 焦云杰, 曹喜营, 柳军, 韩艺辉. 钢纤维对莫来石质浇注料抗热震性的影响[J]. 硅酸盐学报, 2023, 51(6): 1565. FENG Haixia, JIAO Yunjie, CAO Xiying, LIU Jun, HAN Yihui. Effect of Steel Fiber on Thermal Shock Resistance of Mullite Castable[J]. Journal of the Chinese Ceramic Society, 2023, 51(6): 1565.
PDF全文
