[1] 杨洗陈，李会山,刘运武，等.激光再制造技术及其工业应用［J］.中国表面工程,2003,16(4): 43-46.(Yang Xichen, Li Huishan, Liu Yunwu, et al. Laser remanufacturing technology and its industrial application. China Surface Engineering, 2003,16(4): 43-46)

[2] Antonia R A, Bilger R W. An experimental investigation of an axisymmetric jet in a co-flowing air stream［J］. Journal of Fluid Mechanics, 1973, 61: 805-822.

[3] 毕金成，李隆键，崔文智,等.冷喷涂过程中气固两相流的数值模拟［J］.重庆大学学报:自然科学版，2005, 28(4):45-49.(Bi Jincheng, Li Longjian, Cui Wenzhi, et al. Numerical modeling on cold gas dynamic spray process. Journal of Chongqing University: Natural Science Edition, 2005, 28(4)：45-49)

[4] 杨楠，杨洗陈. 激光熔覆中粉嘴流场的数值模拟［J］. 中国激光, 2008, 35(3):443-446.(Yang Nan, Yang Xichen. Numerical simulation of flow field of nozzle in laser cladding. Chinese Journal of Lasers, 2008, 35(3):443-446)

[5] Kheloufi K, Amara E. Numerical modelling of gas/particles diphasic jet in laser cladding by coaxial nozzle［J］. Physics Procedia, 2010,5: 347-352.

[6] Heng P, Frank L. Numerical simulation of metallic powder flow in a coaxial nozzle for the laser aided deposition process［J］. Journal of Materials Processing Technology, 2005,168(2):230-244.

[7] Kovalev O B, Zaitsev A V, Novichenko D, et al. Theoretical and experimental investigation of gas flows, powder transport and heating in coaxial laser direct metal deposition(DMD) process［J］. Journal of Thermal Spray Technology, 2011, 20(3):465-478.

[8] Lin J. Numerical simulation of the focused powder streams in coaxial laser cladding［J］.Journal of Materials Processing Technology, 2000, 105(1/2):17-23.

[9] 杨洗陈，雷剑波，刘运武, 等.激光制造中金属粉末流浓度场的检测［J］.中国激光, 2006,33(7):993-997.(Yang Xichen, Lei Jianbo, Liu Yunwu, et al. Experimental measurement of metal powder stream concentration field in laser manufacturing. Chinese Journal of Lasers, 2006,33(7):993-997)

[10] Zhu Gangxian, Li Dichen, Zhang Anfeng, et al. Numerical simulation of metallic powder flow in a coaxial nozzle in laser direct deposition［J］. Optics and Laser Technology, 2011, 43(1):106-110.