利用LIBS技术对电烙铁的烟雾进行在线分析

为了研究电烙铁工作时焊接含铅锡线产生的烟雾对局域空气的污染, 设计了一套基于激光诱导击穿光谱技术(LIBS)的实验系统, 对电烙铁焊接含铅锡线的烟雾进行在线分析, 在烟雾的光谱中发现了重金属元素铅的特征谱线。使用元素内标法对铅元素进行定量分析, 通过分析铅元素的等离子体温度与电子数密度的相关特性, 验证了实验所得光谱的有效性。结果表明, 通过拟合曲线获得铅元素的检出限为19.35×10-5; 对比传统化学的化验方法, 基于激光诱导击穿光谱的电烙铁焊接锡线的场景检测实验系统和方法具有在线、原位、快速的优越性。该研究对解决电烙铁工作时室内空气的污染, 减轻对使用者健康造成的危害是有帮助的。

Abstract

In order to explain the local air pollution caused by the smoke produced by soldering leaded tin wire with electric soldering iron, an experimental system based on laser induced breakdown spectroscopy was designed to analyze the smoke produced by soldering leaded tin wire with electric soldering iron, and the characteristic spectral line of heavy metal lead was found in the smoke spectrum. Lead was quantitatively analyzed by internal standard method, and the detection limit of lead was 19.35×10-5 by fitting the curve. By analyzing the correlation between the plasma temperature and electron number density of lead, the validity of the experimental spectrum was verified. The results show that the experimental system and method of scene detection of electric soldering tin wire based on laser-induced breakdown spectrum have advantages of on-line, in-situ and fast when compared with the traditional chemical test method.

参考文献

[1] WEI Y H,HUANG Q Ch. The toxicological effect of lead on the human health and its measures of preventing[J].Studies of Trance Elements and Health,2008(4): 62-64(in Chinese).

[2] ZHANG Y, ZHANG T L, LI H. Application of laser-induced breakdown spectroscopy (LIBS) in environmental monitoring[J]. Spectrochimica Acta, 2021, B181: 56-63.

[3] PERSHIN S M, COLAO F, SPIZZICHINO V. Quantitative analysis of bronze samples by laser-induced breakdown spectroscopy (LIBS): A new approach, model, and experiment[J]. Laser Physics,2006,16(3): 455-467.

[4] CHEN L,YOU L B,LUO X F, et al. Detection of Cd in table salt by LIBS technology[J]. Laser Technology,2019,43(1): 6-10(in Chin-ese).

[5] GANG J, CHEN Y Q, YANG Y X, et al. Time-resolved high sensitivity signal detection of chrominum in aluminum alloy by laster-induced breakdown spectroscopy[J]. High Power Laser and Particle Beams, 2017, 29(9): 156-160(in Chinese).

[6] HAN S K, PARK S H, AHN S K. Quantitative analysis of uranium in electrorecovery salt of pyroprocessing using laser-induced breakdown spectroscopy[J]. Plasma Science and Technology, 2021, 23(5): 107-114.

[7] XIU J Sh, DONG L L, LIN Sh, et al. Research progress of laser induced breakdown spectroscopy and other atomic spectroscopy in engine oildetection[J]. Laser Technology, 2018, 42(4): 505-510(in Chinese).

[8] MONCAYO S, MANZOOR S, ROSALES J D, et al. Qualitative and quantitative analysis of milk for the detection ofadulteration by laser induced breakdown spectroscopy (LIBS)[J]. Food Chemistry, 2017, 232: 322-328.

[9] WANG Y, ZHAO N J,MA M J, et al.Chromium detection in water enriched with graphite based on laser-induced breakdown spectroscopy[J]. Laser Technology, 2013, 37(6): 808-811(in Chinese).

[10] BAK M S, MCGANN B, CARTER C, et al. Determinants of laser-induced breakdown spectra in N2-O2 mixtures[J]. Journal of Phy-sics, 2016, D49: 125202.

[11] QUE Zh B, LU W X, XIAO W, et al. LIBS analysis of heavy metal elements in suspended particulate matter in the Yangtze River[J].Laser Journal, 2019, 40(5): 31-34 (in Chinese).

[12] YANG W B, LI B C, HAN Y L, et al. Quantitative analysis of trace oxygen concentration in argon and nitrogen based on laser-induced breakdown spectroscopy[J]. Chinese Journal of Lasers, 2017, 44(10): 1011001(in Chinese).

[13] ZHANG L,WANG Zh, DING H B. Application of LIBS in diagnosis of aerosol[J]. Journal of Atmospheric and Environmental Optics, 2016, 11(5): 338-346 (in Chinese).

[14] KHUMAENI A, KURIHARA K, LIE Z S, et al. Analysis of sodium aerosol using transversely excited atmospheric CO2 laser-induced gas plasma spectroscopy[J]. Current Applied Physics, 2014, 14(3): 47-54.

[15] GUO W L, QIU R, WANG Ch F, et al. Detection of chromium in atmospheric aerosol by laser induced breakdown spectroscopy[J]. Chinese Journal of Quantum Electronics, 2020, 37(6): 745-751(in Chinese).

[16] PHONGIKAROON W S. Elemental detection of cerium and gadolinium in aqueous aerosol using laser-induced breakdown spectroscopy[J]. Applied Spectroscopy, 2016, 70: 1700-1708.

[17] HU X, ZHANG Y, DING Z H, et al. Bioaccessibility and health risk of arsenic and heavy metals (Cd, Co, Cr, Cu, Ni, Pb, Zn and Mn) in TSP and PM2.5 in Nanjing, China[J].Atmospheric Environment, 2012, 57(1): 146-152.

[18] HU Z J, SHI Y L, NIU H Y, et al. Synthetic musk fragrances and heavy metals in snow samples of Beijing urban area, China[J]. Atmospheric Research, 2012, 104: 302-305.

[19] MA C H, XIAO L. Optimization method of quantitative analysis of mn in molten steel based on LIBS[J]. Journal of North China University of Science and Technology (Natural Science Edition), 2016, 38(3): 9-13(in Chinese).

[20] LIU Y, LU J D, LI P, et al. Application of internal standard method in the determination of carbon content in pulverized coal by laser induced breakdown spectroscopy[J]. Proceedings of Chinese Society for Electrical Engineering, 2009, 29(5): 1-4(in Chinese).

[21] HUDDLESTONE R H, LEONARD S L. Plasma diagnostic techniques [M]. New York,USA: Academic Press, 1965: 201-264.

[22] ASGILL M E, GROH S, NIEMAX K, et al. The use of multi-element aerosol particles for determining temporal variations in temperature and electron density in laser-induced plasmas in support of quantitative laser-induced breakdown spectroscopy[J]. Spectrochi-mica Acta, 2015, B109: 21-27.

罗宇恒, 万恩来, 刘玉柱. 利用LIBS技术对电烙铁的烟雾进行在线分析[J]. 激光技术, 2022, 46(5): 663. LUO Yuheng, WAN Enlai, LIU Yuzhu. Online detection of smoke from the electric iron by LIBS[J]. Laser Technology, 2022, 46(5): 663.

利用LIBS技术对电烙铁的烟雾进行在线分析

关于本站 Cookie 的使用提示

全站搜索

利用LIBS技术对电烙铁的烟雾进行在线分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索