[1] FENG G,PAN Y.Investigation of ball screw preload variation based on dynamic modeling of a preload adjustable feed-drive system and spectrum analysis of ball-nuts sensed vibration signals［J］.International Journal of Machine Tools & Manufacture,2012,52:85-96.

[2] 程丁继,时运来,林瑜阳,等.螺旋箝位双向大推力压电直线作动器研究［J］.压电与声光,2019,41(2):195-198.

[3] LI Z,LU Z,ZHAO C,et al.Heat source forecast of ball screw drive system under actual working conditions based on on-line measurement of temperature sensors［J］. Sensors,2019,19(21):4694.

[4] WEI C C,LIOU W L,LAI R S.Wear analysis of the offset type preloaded ball-screw operating at high speed［J］.Wear,2012,292/293:111-123.

[5] BERTOLINO A C,JACAZIO G,MAURO S,et al.Investigation on the ball screws no-load drag torque in presence of lubrication through MBD simulations［J］. Mechanism and Machine Theory,2021,161:104328.

[6] 赵哲,欧屹,孟军虎,等.考虑转速影响的滚珠丝杠副摩擦系数计算与试验研究［J］.摩擦学学报,2017,376: 784-790.

[7] CORRADI S,MARCHETTI M.Structural behaviour of aeronautical tungsten carbide/carbon-coated titanium ball screws under space thermal-vacuum conditions［J］.Fatigue & Fracture of Engineering Materials & Structures,2010,28(3):309-319.

[8] LITTMANN W,WALLASCHEK H S.Sliding friction in the presence of ultrasonic oscillations: superposition of longitudinal oscillations［J］.Archive of Applied Mechanics,2001,71:549-554.

[9] 彭太江,常颖,杨志刚,等.超声减摩用压电换能器阻抗匹配的试验研究［J］.压电与声光,2004,26(1):65-68.

[10] 常颖,彭太江,阚君武,等.超声振动对摩擦系数影响的试验研究［J］.压电与声光,2003,25(6):511-513.

[11] 温智益,何勍,杨文鹏,等.用于挠性驱动的短筒型压电振子研究［J］.压电与声光,2020,42(1):88-92.

[12] CHEN Y,ZHAO C,ZHANG S,et al.Analysis on load distribution and contact stiffness of single-nut ball screw based on the whole rolling elements model ［J］.Transactions of the Canadian Society for Mechanical Engineering,2019,433:344-365.

[13] YANG Y,ZHOU L,ZHOU H,et al.Optimal design of slit impeller for low specific speed centrifugal pump based on orthogonal test［J］.Journal of Marine Science and Engineering,2021,9(2):121.

[14] CARDONI A,LUCAS M.Enhanced vibration performance of ultrasonic block horns［J］.Ultrasonics,2002,40(1/8): 365-369.

[15] RUDERMAN M,BERTRAM T.Two-state dynamic friction model with elasto-plasticity［J］.Mechanical Systems & Signal Processing,2013,39(1/2):316-332.