基于有限元方法的表面V形裂纹激光超声数值仿真研究

为了实现表面V形裂纹的定量检测, 采用有限元的方法研究了激光激发的超声表面波与表面V形裂纹的作用机理, 在反射回波信号中提取了与表面裂纹长度和角度有关的特征信号。分析了裂纹的角度和长度变化对表面波信号的影响, 并对时域信号进行了时频分析, 提出了一种利用反射表面波定量表征表面V形裂纹长度的方法。数值结果表明, 随着裂纹长度的增加, 反射回波的到达时间差也线性增加, 透射表面波对裂纹角度的变化比较敏感。通过反射回波到达的时间差与裂纹长度之间的关系可以快速判断裂纹长度, 并定量表征出相应裂纹的长度。数值结果与理论结果有很高的吻合度, 为表面V形裂纹长度的定量检测提供了一种高效准确的方法。

Abstract

In order to realize the quantitative detection of surface V-shaped cracks, this paper uses finite element method to study the mechanism of laser-excited ultrasonic surface waves and surface V-shaped cracks. The characteristics related to the length and angle of surface cracks are extracted from the reflected characteristic signal. The influence of the angle and length of the crack on the surface wave signal is analyzed, and the time-frequency analysis of the time-domain signal is carried out, and then a method to quantitatively characterize the length of the surface V-shaped crack using reflected surface wave is proposed. The numerical results show that with the increase of the crack length, the time difference of the reflected echoes also linearly increases, and the transmitted surface wave is more sensitive to the change of the crack angle. Through the relationship between the time difference of the reflected echo arrival and the crack length, the crack length can be quickly judged, and the length of the corresponding crack can be quantitatively characterized. The numerical results are in good agreement with the theoretical results, which provides an efficient and accurate method for the quantitative detection of the length of surface V-shaped cracks.

参考文献

[1] 赵艳,严伟,沈中华,等.弹性声波与表面缺陷相互作用的数值模拟［J］.激光技术,2010,34(1):91-94.

[2] 单宝琛,陈晔,郑宾,等.基于HHT的激光超声缺陷检测分析［J］.应用激光,2020,40(4):745-750.

[3] 黄燕杰,尚建华,任立红,等.用于铝板缺陷无损检测的激光超声有限元模拟研究［J］.应用光学,2019,40(1):150-156.

[4] 关建飞,沈中华,倪晓武,等.激光声表面波检测铝板表面凹痕的数值研究［J］.测试技术学报,2006,20(5):390-396.

[5] 沈中华,袁玲,张宏超.固体中的激光超声［M］.北京:人民邮电出版社,2015.

[6] 郭华玲,秦峰,郑宾,等.激光超声缺陷统计特征神经网络识别技术研究［J］.应用激光,2017,37(6):888-892.

[7] 王威,仲政,潘永东.激光远场激发表面波在开口缺陷处的散射回波［J］.激光技术,2015,39(2):157-165.

[8] 王余敬,吴耀金,刘辉,等.声表面波检测铝板表面微缺陷深度实验研究［J］.应用声学,2016,35(1):36-41.

[9] 曾伟,王海涛,田贵云,等.研究激光激发的声表面波与材料近表面缺陷的振荡效应［J］.物理学报,2015,64(13):134302.

[10] 王敬时,徐晓东,刘晓峻,等.利用激光超声技术研究表面微裂纹缺陷材料的低通滤波效应［J］.物理学报,2008,57(12):7765-7769.

[11] DUTTON B, CLOUGH A R, ROSLI M H, et al. Non-contact ultrasonic detection of angled surface defects［J］. NDT & E International, 2011, 44(4): 353-360.

[12] 陶程,殷安民,王煜帆,等.高温下表面波测量亚表面缺陷宽度的数值模拟［J］.激光与红外,2019,49(4):403-409.

[13] 宋大成,张兴媛,陈超.基于声表面波的V型裂纹快速检测数值研究［J］.激光与光电子学进展,2021,58(5):194-202.

[14] 左欧阳,武美萍,唐又红.基于COMSOL的激光超声裂纹检测数值模拟研究［J］.激光与红外,2020,50(10):1164-1171.

[15] ARIAS I, ACHENBACH J D. A model for the ultrasonic detection of surface-breaking cracks by the scanning laser source technique［J］. Wave Motion, 2004, 39(1): 61-75.

[16] 唐诗.增材制造中激光超声表面缺陷检测技术研究［D］.成都:电子科技大学,2019.

[17] ARIAS I, ACHENBACH J D. Thermoelastic generation of ultrasound by line-focused laser irradiation［J］. International Journal of Solids and Structures, 2003, 40(25): 6917-6935.

[18] CHEN D, LV G, GUO S F, et al. Subsurface defect detection using phase evolution of line laser-generated Rayleigh waves［J］. Optics & Laser Technology, 2020, 131: 106410.

[19] 许伯强.层状材料的激光超声有限元模拟和神经网络方法反演材料参数的研究［D］.南京:南京理工大学,2004.

[20] COOPER J A, DEWHURST R J, PALMER S B, et al. Characterization of surface-breaking defects in metals with the use of laser-generated ultrasound［J］. Philosophical Transactions of the Royal Society of London Series A, Mathematical and Physical Sciences, 1986, 320(1554): 319-328.

[21] 秦峰,吴耀金,郭华玲.激光超声信号与裂纹能量作用机理研究［J］.应用激光,2017,37(5):732-736.

[22] WANG C Y, SUN A Y, XUE M S, et al. Width gauging of surface slot using laser-generated Rayleigh waves［J］. Optics & Laser Technology, 2017, 92: 15-18.

[23] MATSUDA Y, NAKANO H, NAGAI S, et al. Surface breaking crack evaluation with photorefractive quantum wells and laser-generated Rayleigh waves［J］. Applied Physics Letters, 2006, 89(17): 171902.

张忠, 杜晓钟, 张彦杰, 莫海峰, 张明智. 基于有限元方法的表面V形裂纹激光超声数值仿真研究[J]. 应用激光, 2021, 41(5): 1097. Zhang Zhong, Du Xiaozhong, Zhang Yanjie, Mo Haifeng, Zhang Mingzhi. Research on Laser Ultrasonic Numerical Simulation of Surface V-shaped Crack Based on FEM[J]. APPLIED LASER, 2021, 41(5): 1097.

基于有限元方法的表面V形裂纹激光超声数值仿真研究

关于本站 Cookie 的使用提示

全站搜索

基于有限元方法的表面V形裂纹激光超声数值仿真研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索