半导体光电, 2019, 40 (2): 215, 网络出版: 2019-05-05  

金刚线切割多晶硅片表面酸制绒效果研究

Study on Acid Texturization of Diamond Wire Sawn Multicrystalline Silicon
作者单位
南京航空航天大学 材料科学与技术学院 江苏省能量转换与技术重点实验室, 南京 210016
摘要
为了探索金刚线切割多晶硅片的表面制绒新技术, 采用常规酸制绒、添加剂酸制绒和酸蒸气制绒三种方法对金刚线切割多晶硅片表面进行制绒处理, 并用扫描电镜和光谱仪分析了三种制绒方法处理后多晶硅片的表面形貌和反射率比变化。结果表明, 酸蒸气制绒能够更加有效地去除线锯切割产生的平行纹, 降低表面反射率。通过调节蒸气源蒸发的温度, 可以有效改善多晶硅的表面形貌, 大幅降低入射光在多晶硅表面的反射率, 300~1100nm波长范围内多晶硅样品的最低平均反射率达11.6%, 有望用于制作高效多晶硅太阳电池。
Abstract
In order to explore new technologies for texturization of diamond wire sawn multicrystalline silicon (mcSi) wafers, three methods including traditional acid texturing, additive acid texturing and acid vapor texturing were adopted to make acid texturization on the surface of the diamond wire sawn mcSi wafers. Scanning electron microscope (SEM) and spectrograph were used to analyze the surface morphology and reflectivity of the silion wafers. The results show that acid vapor texturing method can remove the stubborn saw marks of mcSi wafers more effectively and reduce the surface reflectivity. By adjusting the evaporation temperature of acid vapor solution, the surface morphology of mcSi wafers was improved, and the minimum average reflectance at 300~1100nm decreases to 11.6%.
参考文献

[1] Gao Y F, Ge P Q, Hou Z J. Study on removal mechanism of fixedabrasive diamond wire saw slicing monocrystalline silicon[J]. Key Engin. Materials, 2008, 359360: 450454.

[2] Yang C, Wu H, Melkote S, et al. Comparative analysis of fracture strength of slurry and diamond wire sawn multicrystalline silicon solar wafers[J]. Adv. Engin. Materials, 2013, 15(5): 358365.

[3] 刘小梅, 李 妙, 陈文浩, 等. 金刚石线锯切割多晶硅片表面特性与酸刻蚀制绒问题[J]. 光子学报, 2014, 43(8): 138143.

    Liu Xiaomei, Li Miao, Chen Wenhao, et al. The surface characteristics of diamond wire sawn multicrystalline silicon wafers and their acidic texturization[J]. Acta Photonica Sinica, 2014, 43(8): 138143.

[4] Lai W X, Liao G L, Shi T L, et al. Study of reaction ion etching processing technique[J]. Semiconductor Technol., 2006, 31(6): 414417.

[5] 邹宇新, 席风硕, 邱佳佳, 等. 金属铜辅助化学刻蚀对金刚线切割多晶硅的制绒[J]. 中国表面工程, 2017, 30(6): 5966.

    Zou Yuxin, Xi Fengshuo, Qiu Jiajia, et al. Cuassisted chemical etching of diamond wire sawn multicrystalline silicon wafers for texturing[J]. China Surface Engin., 2017, 30(6): 5966.

[6] Liu X M, Chen W H, Li M, et al. Texture for diamond wire sawn multicrystalline silicon wafers by a vapor etching method[J]. Acta Photonica Sinica, 2015, 44(1): 2629.

[7] Geng X, Qi Z, Li M, et al. Fabrication of antireflective layers on silicon using metalassisted chemical etching with in situ deposition of silver nanoparticle catalysts[J]. Solar Energy Materials & Solar Cells, 2012, 103(15): 98107.

[8] Niu Y C, Liu H T, Liu X J, et al. Study on nanopores enlargement during Agassisted electroless etching of diamond wire sawn polycrystalline silicon wafers[J]. Materials Science in Semiconductor Proc., 2016, 56: 119126.

[9] Duran J M, Sarangan A. Fabrication of ultrahigh aspect ratio silicon nanostructures using selfassembled gold metalassisted chemical etching[J]. J. of Micro/Nanolithography Mems & Moems, 2017, 16(1): 014502.

[10] Huang Z G, Lin X X, Zeng Y, et al. OnestepMACE nano/microstructures for highefficient largesize multicrystalline Si solar cells[J]. Solar Energy Materials & Solar Cells, 2015, 143: 302310.

[11] Zhang C, Li S, Ma W, et al. Fabrication of ultralow antireflection SiNWs arrays from mcSi using one step MACE[J]. J. of Materials Science: Materials in Electron., 2017, 28(12): 85108518.

[12] 蒋 晔, 沈鸿烈, 蒲 天, 等. 圆化处理法制备高效大尺寸多晶黑硅太阳电池[J]. 南京航空航天大学学报, 2015, 47(5): 683686.

    Jiang Ye, Shen Honglie, Pu Tian, et al. Largescale highefficiency multicrystalline black silicon solar cell via rounding treatment[J]. J. of Nanjing University of Aeronautics & Astronautics, 2015, 47(5): 683686.

[13] Zheng C F, Shen H L, Pu T, et al. Highefficient solar cells by the Ag/Cuassisted chemical etching process on diamondwiresawn multicrystalline silicon[J]. IEEE J. of Photovoltaics, 2017, 7(1): 153156.

[14] Zhang L Y, Lv Z X, Wang S, et al. Surface morphology characteristics analysis of diamond wire saw cutting polysilicon[J]. Diamond & Abrasives Engin., 2014, 34(2): 5761.

[15] Chen W H, Li M, Liu X M, et al. Research of the cutting marks on diamond wire cut multicrystalline silicon wafers and the method to remove them[J]. J. of Synthetic Crystals, 2014, 43(2): 314320.

[16] Xiao Z G, Geng G Y, Wei X Q, et al. Morphology of etchpits on HFHNO3H2O vaporetched diamond wire sawn multicrystalline silicon wafers[J]. Semiconductor Science & Technol., 2016, 31(11): 115018.

[17] Xiao Z, Geng G, Wei X, et al. On the mechanism of the vapor etching of diamond wire sawn multicrystalline silicon wafers for texturing[J]. Materials Science in Semiconductor Proc., 2016, 53: 812.

陈春明, 沈鸿烈, 李琰琪, 王明明, 顾浩, 任学明. 金刚线切割多晶硅片表面酸制绒效果研究[J]. 半导体光电, 2019, 40(2): 215. CHEN Chunming, SHEN Honglie, LI Yanqi, WANG Mingming, GU Hao, REN Xueming. Study on Acid Texturization of Diamond Wire Sawn Multicrystalline Silicon[J]. Semiconductor Optoelectronics, 2019, 40(2): 215.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!