2WC对316L钢表面的铁基激光熔覆涂层的性能影响研究

为进一步提高316L钢材的显微硬度，拓宽其使用范围，采用激光熔覆的方法，在316L钢材表面制备出不同比例的Fe60-WC熔覆层。研究不同比例的WC对熔覆层的截面组织、显微硬度、晶相构成的影响及原因。经过试验分析可知，当WC的质量分数为3%时，其与Fe60形成了硬质合金结构，增加了熔覆层的显微硬度。当WC的质量分数提升至5%时，熔覆层的微观结构发生了较大的改变，此时WC的质量分数虽然更多，但是熔覆层的显微硬度有所下降。结果表明，当WC的质量分数为3%时，熔覆层保持树形胞状晶，此时的显微硬度明显高于基体。x

Abstract

In order to further improve the microhardness of 316L substrate and improve its application fields, different weight ratios of Fe60-WC cladding layers were prepared on the surface of 316L substrate by laser cladding. Then the morphology，microhardness, and crystal phase composition of laser cladding layers with different ratios of WC were explored. According to the experimental analysis, when the weight ratio of WC is 3%, the laser cladding reveals eutectic structure with Fe60, and its microhardness is obviously increased. Furthermore, when the weight ratio of WC increased to 5%, the microstructure of the cladding layer reduces distinctly. The result shows that when the weight ratio of WC is 3%, the microhardness of the cladding layer is obviously higher than other simples.

参考文献

[1] 董世运, 马运哲, 徐滨士, 等. 激光熔覆材料研究现状［J］.材料导报 2006， 60(6):5-9.DONG S Y, MA Y Z, XU B S, et al. Current Status of Material for Laser Cladding［J］.Materials Review,2006, 60(6):5-9.

[2] 王东生, 田宗军, 沈理达, 等. 激光熔覆技术研究现状及其发展［J］. 应用激光, 2012, 32(6): 538-544.WANG D S, TIAN Z J, SHEN L D, et al. Research status and development of laser cladding technology［J］. Applied Laser, 2012, 32(6): 538-544.

[3] 张艺, 马志凯, 孙铂, 等. 激光熔覆材料的研究现状及发展［J］. 热加工工艺, 2015, 44(14): 40-44.ZHANG Y, MA Z K, SUN B, et al. Present status and development of material for laser cladding［J］. Hot Working Technology, 2015, 44(14): 40-44.

[4] 李春彦, 张松, 康煜平, 等. 综述激光熔覆材料的若干问题［J］. 激光杂志, 2002, 23:(3):5-9.LI C Y, ZHANG S, KANG Y P, et al. Comment on material system for laser cladding［J］. Laser Journal, 2002,23:(3):5-9.

[5] 吴俣, 马朋召, 白文倩, 等. 不同扫描策略下316L/AISI304激光熔覆过程中温度场-应力场的数值模拟［J］. 中国激光, 2021, 48(22): 2202002.WU Y, MA P Z, BAI W Q, et al. Numerical simulation of temperature fieldand stress field in 316L/AISI304 laser cladding with different scanning strategies［J］. Chinese Journal of Lasers, 2021, 48(22): 2202002.

[6] 徐涛, 王子顺, 石永华. Investigation of C276 alloy and 316L SS TIG welded joints with ERNiCrMo-4 and ER304 welding wires［J］. 中国焊接, 2021, 30:(4):9-16.XU T, WANG Z S, SHI Y H. Investigation of C276 alloy and 316L SS TIG welded joints with ERNiCrMo-4 and ER304 welding wires［J］. China Welding, 2021, 30:(4)9-16.

[7] 侯若松, 王炜康, 王宇航,等. 等离子增材制造WC-316L梯度复合材料的组织与性能［J］.热加工工艺, 2023, 52(5):46-50.HOU R S, WANG W K, WANG Y H, et al. Microstructure and properties of WC-316L gradient composite fabricated by plasma additive manufacturing［J］.Hot Working Technology,2023, 52(5):46-50.

[8] 孙敏, 吴国龙, 王晔, 等. 316L表面激光熔覆复合微弧氧化制备陶瓷涂层［J］. 表面技术, 2019, 48(2): 24-32.SUN M, WU G L, WANG Y, et al. Ceramiccoating prepared by laser cladding and composite micro-arc oxidation on 316L surface［J］. Surface Technology, 2019, 48(2): 24-32.

[9] 张明奇, 姜伟, 王树奇. 激光熔覆Fe基合金涂层的高温磨损性能［J］. 材料保护, 2021, 54(6): 64-71.ZHANG M Q, JIANG W, WANG S Q. High-temperature wear performance of laser cladding Fe-based alloy coating［J］. Materials Protection, 2021, 54(6): 64-71.

[10] 卢庆亮, 王静, 戚小霞, 等. 面向盾构机密封跑道修复的激光熔覆Fe基涂层制备工艺［J］. 金属热处理, 2022, 47(1): 202-211.LU Q L, WANG J, QI X X, et al. Preparation technology of laser clad Fe-based coating for shield sealing runway repair［J］. Heat Treatment of Metals, 2022, 47(1): 202-211.

[11] 侯纪新, 章顺虎, 蒋小舟, 等. 激光熔覆工艺参数及微合金元素对Fe基非晶复合涂层显微硬度的影响［J］. 应用激光, 2015, 35(4): 402-407.HOU J X, ZHANG S H, JIANG X Z, et al.Effect of laser cladding process parameters and microalloying elements on microhardness of Fe-based amorphous composite coating［J］. Applied Laser, 2015, 35(4): 402-407.

[12] 杨思瑞, 白海清, 鲍骏, 等. 激光熔覆铁基合金粉末单道形貌及性能研究［J］. 应用激光, 2022, 42(2): 33-40.YANG S R, BAI H Q, BAO J, et al. Single pass forming process of laser cladding iron base alloy powder［J］. Applied Laser, 2022, 42(2): 33-40.

[13] 王胜, 邵思程, 毕少平, 等. TC4表层激光熔覆Fe基合金层组织及性能研究［J］. 激光技术, 2022, 46(5): 653-656.WANG S, SHAO S C,BI S P, et al. Study on microstructure and properties of laser cladding Fe-based alloy layer on TC4 surface［J］. Laser Technology, 2022, 46(5): 653-656.

[14] 赵栓峰, 郭颖潇, 柴蓉霞, 等. 扫描速度对激光熔覆铁基合金的组织与性能影响研究［J］. 应用激光, 2020, 40(5): 811-820.ZHAO S F, GUO Y X, CHAI R X, et al. Research on the effect of scanning speed on microstructure and properties of laser cladding the Fe-base alloy［J］. Applied Laser, 2020, 40(5): 811-820.

[15] 刘伟斌, 李新梅, 井振宇, 等. 激光熔覆镍基WC涂层的组织及性能研究［J］. 应用激光, 2021, 41(5): 961-967.LIU W B, LI X M, JING Z Y, et al. Microstructure and properties of laser cladding nickel based WC coating［J］. Applied Laser, 2021, 41(5): 961-967.

[16] 樊帅奇, 张蕾涛, 李海涛, 等. WC初始状态对激光熔覆Ni60/WC涂层组织及性能的影响［J］. 材料热处理学报, 2021, 42(6): 157-162.FAN S Q, ZHANG L T, LI H T, et al. Effect of initial state of WC on microstructure and properties of laser cladding Ni60/WC coatings［J］. Transactions of Materials and Heat Treatment, 2021, 42(6): 157-162.

[17] 刘钊鹏, 顾俊, 王健超, 等. WC-Co硬质合金涂层的激光熔覆工艺研究［J］. 应用激光, 2021, 41(4): 715-723.LIU Z P, GU J, WANG J C, et al. Study on laser cladding process of WC-Co carbide coating［J］. Applied Laser, 2021, 41(4): 715-723.

[18] 曹俊, 卢海飞, 鲁金忠, 等. WC对激光熔覆热作模具的组织和磨损性能的影响［J］. 中国激光, 2019, 46(7): 0702001.CAO J, LU H F, LU J Z, et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding［J］. Chinese Journal of Lasers, 2019, 46(7): 0702001.

[19] 孙帅, 李崇桂, 李帅, 等. WC含量对激光熔覆Al2O3/TiO2涂层组织与性能的影响［J］. 金属热处理, 2018, 43(12): 78-82.SUN S, LI C G, LI S, et al. Effect of WC content on microstructure and properties of laser clad Al2O3/TiO2 coating［J］. Heat Treatment of Metals, 2018, 43(12): 78-82.

[20] 林鑫, 杨海欧, 陈静, 等. 激光快速成形过程中316L不锈钢显微组织的演变［J］. 金属学报, 2006, 42(4): 361-368.LIN X, YANG H O,CHEN J, et al. Microstructure evolution of 316l stainless steel during laser rapid forming［J］. Acta Metallurgica Sinica, 2006, 42(4): 361-368.

李凯玥, 黄江, 师文庆, 朱志凯, 谢玉萍, 吴香林. 2WC对316L钢表面的铁基激光熔覆涂层的性能影响研究[J]. 应用激光, 2023, 43(6): 0036. Li Kaiyue, Huang Jiang, Shi Wenqing, Zhu Zhikai, Xie Yuping, Wu Xianglin. Effect of WC on the Properties of Fe-based Laser Cladding Coating on 316L Substrate[J]. APPLIED LASER, 2023, 43(6): 0036.

2WC对316L钢表面的铁基激光熔覆涂层的性能影响研究

关于本站 Cookie 的使用提示

全站搜索

2WC对316L钢表面的铁基激光熔覆涂层的性能影响研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索